AGCO RT135 Specifications - AGCO RT135 Specs

info
2004 - 2005 RT Series, Row-Crop tractor
Previous model: AGCO RT130
Series next: AGCO RT150
Series back: AGCO RT120
Production
Manufacturer: AGCO
Factory: Beauvais, France
Capacity
Fuel: 100 gal [378.5 L]
3-Point Hitch
Rear Type: II/IIIN
Control: electronic lower-link
Rear lift (at 24"/610mm): 14,500 lbs [6577 kg], 12,500 lbs [5670 kg] (CVT)
Power Take-off (PTO)
Rear PTO: independent
Rear RPM: 540/1000
Front PTO: optional
Dimensions & Tires
Wheelbase: 113.8 inches [289 cm]
Weight: 14440 to 15525 pounds
AGCO RT135 Power
PTO (claimed): 135 hp [100.7 kW]
Drawbar (tested): 108.36 hp [80.8 kW]
PTO (tested): 143.94 hp [107.3 kW]
Mechanical
Chassis: 4x2 2WD, 4x4 MFWD 4WD
Differential lock: electro-hydraulic front and rear
Steering: power
Brakes: hydraulic wet disc
Cab: Cab standard with optional automatic climate control.
Hydraulics
Type: closed center pressure flow compensating (PFC)
Pressure: 2900 psi [200.0 bar]
Valves: 4 or 5
SCV flow: 29 gpm [109.8 lpm]
Electrical
Ground: negative
Charging system: alternator
Charging amps: 120
Battery
Number: 2
Volts: 12
info
Bore/Stroke: 4.094x5.179 inches [104 x 132 mm]
Emissions: Tier II
Air cleaner: dual paper elements
Pre-heating: grid heater
Compression: 17.5:1
Rated RPM: 2200
Torque: 531 lb-ft [720.0 Nm]
Torque RPM: 1149
Starter volts: 12
Engine Detail
Cummins, turbocharged diesel, 6-cylinder, liquid-cooled, 408 ci [6.7 L]
info
Previous model: AGCO RT130
Series next: AGCO RT150
Series back: AGCO RT120
Transmission
Transmission: PowerMaxx CVT
Type: continuously variable transmission
Gears: infinite (2-range) forward and reverse
info
Previous model: AGCO RT130
Series next: AGCO RT150
Series back: AGCO RT120
Dimensions
Weight (shipping): 14,440 lbs [6549 kg] (4WD Cab), 15,057 lbs [6829 kg] (4WD CVT Cab)
Weight (operating): 15,525 lbs [7042 kg] (4WD CVT Cab)
Weight (ballasted): 18,575 lbs [8425 kg]
Wheelbase: 113.8 inches [289 cm]
Clearance (drawbar): 14 inches [35 cm]
Front tread: 61.2 to 89.2 inches [155 to 226 cm]
Rear tread: 60.5 to 120 inches [153 to 304 cm]
info
Previous model: AGCO RT130
Series next: AGCO RT150
Series back: AGCO RT120
Loader
Loader type: AGCO FL600
Height (to pin): 178 inches [452 cm]
Clearance, dumped bucket: 139 inches [353 cm]
Dump reach: 27 inches [68 cm]
Dump angle: 48
Reach at ground: 103 inches [261 cm]
Rollback angle: 38
Breakout force (bucket): 6952 lbs [3153 kg]
Lift to full height (at pin): 7641 lbs [3465 kg]
Bucket width: 96 inches [243 cm]
Raise time to height: 6.1 s
Bucket dump time: 2.7 s
Lowering time: 4.4 s
Rollback time: 2.2 s