FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
Series: | DT275B |
Production | |
Manufacturer: | AGCO |
Type: | Row-Crop tractor |
Factory: | Beauvais, France |
Original price: | $231,833 (2009 ) |
The AGCO DT275B is the same as a Massey Ferguson 8680. |
AGCO DT275B Power | |
Engine: | 320 hp 238.6 kW |
PTO (claimed): | 275 hp 205.1 kW |
Drawbar (tested): | 240.7 hp 179.5 kW |
PTO (tested): | 322.6 hp 240.6 kW |
AGCO DT275B Engine | |
Fuel tank: | 155.9 gal 590.1 L, 182.3 gal 690.0 L (without DEF) |
Exhaust fluid (DEF): | 7.9 gal 29.9 L |
Mechanical | |
Chassis: | 4x4 MFWD 4WD |
Final drives: | inboard planetary |
Differential lock: | full locking electro-hydraulic front and rear |
Steering: | power |
Brakes: | hydraulic wet disc |
Cab: | Cab standard with heat and air-conditioning. Optional heated seat, power adjustable mirrors, and automatic temperature control. ISOBUS 11783 compatible. Auto-Guide optonal. |
Transmission: | continuously variable transmission |
Hydraulics | |
Type: | closed center load sensing |
Pressure: | 2,901 psi 200.0 bar |
Valves: | 4 to 6 |
SCV flow: | 26.4 gpm 99.9 lpm |
Total flow: | 46.2 gpm 174.9 lpm |
Tractor hitch | |
Rear Type: | 3, 4 (optional) |
Rear lift (at ends): | 26,460 lbs 12002 kg |
Rear lift (at 24"/610mm): | 21,336 lbs 9678 kg |
Front Hitch: | 3 |
Front lift (at ends): | 11,020 lbs 4998 kg |
Drawbar: | Category 3, Category 3 Heavy Duty*Optional, Category 4*Optional |
Power Take-off (PTO) | |
Rear PTO: | independent |
Clutch: | electro-hydraulic |
Rear RPM: | 1000E/1000 (1.75) |
Engine RPM: | 1000@1970 1000E@1605 |
Front PTO: | optional |
Front RPM: | 1000 |
Dimensions & Tires | |
Wheelbase: | 122.2 inches 310 cm |
Weight: | 24,250 lbs 10999 kg |
Front tire: | 420/85R34 |
Rear tire: | 480/80R50 |
Electrical | |
Ground: | negative |
Charging system: | alternator |
Charging amps: | 240 |
Battery volts: | 12 |
info | |
Series: | DT275B |
Engine Detail | |
AGCO SISU POWER 84CTA, turbocharged intercooled diesel, 6-cylinder, liquid-cooled, The engine uses AGCO's e3 selective catalytic reduction (SCR) system to reduce nitrogen oxides (NOx). The system uses a diesel exhaust fluid that is injected into the exhaust gas. The engine could optionally be equipped with an exhaust gas recirculation (EGR) system in place of SCR. | |
Displacement: | 512.6 ci 8.4 L |
Bore/Stroke: | 4.37x5.71 inches 111 x 145 mm |
Emissions: | Tier III |
Emission control: | selective catalytic reduction (SCR), exhaust gas recirculation (EGR) optional |
Power: | 320 hp 238.6 kW |
Maximum Power: | 350 hp 261.0 kW |
Fuel system: | high-pressure common rail |
Pre-heating: | thermostart |
Compression: | 16.7:1 |
Rated RPM: | 2200 |
Torque: | 1100 lb-ft 1491.6 Nm |
Torque RPM: | 1500 |
Starter: | electric |
Starter volts: | 12 |
info | |
Series: | DT275B |
Transmission | |
Transmission: | PowerMaxx CVT |
Type: | continuously variable transmission |
Gears: | infinite forward and reverse |
info | |
Series: | DT275B |
AGCO DT275B Tires | |
Standard tires (ag): | Front: 420/85R34. Rear: 480/80R50 |
Optional tires (ag): | Front: 420/85R30. Rear: 520/85R42, Front: 420/90R30. Rear: 520/85R42, Front: 420/90R30. Rear: 480/80R46, Front: 420/85R34. Rear: 520/85R46, Front: 480/70R34. Rear: 520/85R46, Front: 480/70R34. Rear: 480/80R50 |
Dimensions | |
Wheelbase: | 122.2 inches 310 cm |
Length: | 215.7 inches 547 cm |
Height (cab): | 141 inches 358 cm |
Shiping weight: | 24,250 lbs 10999 kg |
Max weight: | 38,890 lbs 17640 kg |
Front axle: | Suspension optional |
Rear axle: | Bar: 4.33 by 105 inches 109 by 2667 mm ( |
Rear tread: | 58.5 to 119.5 inches 148 to 303 cm |
info | |
Series: | DT275B |
AGCO FL85 Loader | |
Height (to pin): | 148 inches 375 cm |
Dump angle: | 54° |
Rollback angle: | 40° |
Breakout force (lift): | 7,319 lbs 3319 kg |
Lift to full height (at pin): | 5,335 lbs 2419 kg |
Lift to full height (at 800mm): | 4,696 lbs 2130 kg |