AGCO DT225 Specifications - AGCO DT225 Specs

info
The AGCO DT225 is similar to the White 8810 and the AGCO Allis 9785.
Production
Manufacturer: AGCO
Factory: Beauvais, France
Capacity
Fuel: 120 gal [454.2 L]
3-Point Hitch
Rear Type: 3/3N
Rear lift (at 24"/610mm): 19,000 lbs [8618 kg]
Power Take-off (PTO)
Rear PTO: independent
Rear RPM: 1000
Dimensions & Tires
Wheelbase: 121 inches [307 cm]
Weight: 19,700 lbs [8935 kg]
AGCO DT225 Power
PTO (claimed): 225 hp [167.8 kW]
Drawbar (tested): 200.61 hp [149.6 kW]
PTO (tested): 227.95 hp [170.0 kW]
Mechanical
Chassis: 4x4 MFWD 4WD
Steering: hydrostatic power
Brakes: hydraulic wet disc
Cab: Cab standard.
Hydraulics
Type: closed center pressure flow compensated (PFC)
Pressure: 2900 psi [200.0 bar]
Valves: 4
Pump flow: 29 gpm [109.8 lpm], 39 gpm [147.6 lpm] *Optional
Electrical
Ground: negative
Charging system: alternator
Battery
Volts: 12
info
Bore/Stroke: 4.488x5.315 inches [114 x 135 mm]
Air cleaner: two paper elements
Rated RPM: 2200
Torque: 677 lb-ft [918.0 Nm]
Torque RPM: 1498
Starter volts: 12
Engine Detail
Cummins C8.3L, turbocharged aftercooled diesel, 6-cylinder, liquid-cooled, 505 ci [8.3 L]
info
Previous model: AGCO White 8810
Series back: AGCO DT200
Transmission
Type: full power shift
Gears: 18 forward and 6 reverse
Clutch: electro-hydraulic wet disc
info
Previous model: AGCO White 8810
Series back: AGCO DT200
Dimensions
Weight (shipping): 19,700 lbs [8935 kg]
Wheelbase: 121 inches [307 cm]
Length: 203 inches [515 cm]
Width: 98.2 inches [249 cm]
Height: 121 inches [307 cm]
info
Previous model: AGCO White 8810
Series back: AGCO DT200
Loader
Loader type: AGCO FL600
Height (to pin): 181 inches [459 cm]
Clearance, dumped bucket: 152 inches [386 cm]
Dump reach: 26 inches [66 cm]
Dump angle: 47
Reach at ground: 103 inches [261 cm]
Rollback angle: 38
Breakout force (bucket): 6952 lbs [3153 kg]
Lift to full height (at pin): 7641 lbs [3465 kg]
Bucket width: 96 inches [243 cm]
Raise time to height: 6.1 s
Bucket dump time: 2.7 s
Lowering time: 4.4 s
Rollback time: 2.2 s