Allis Chalmers D12 Specifications - Allis Chalmers D12 Specs

info
1959 - 1968 D Series, Row-Crop tractor
Series back: Allis Chalmers D10
Production
Manufacturer: Allis Chalmers
Factory: West Allis, Wisconsin, USA
Original price (USD): $3,522 (1968)
Variants
D12 High Clearance: cultivation tractor
D10: single-row tractor
Capacity
Fuel: 12.5 gal [47.3 L]
Rear Hitch
Type: Snap-Couple
3-Point Hitch
Rear Type: I
Power Take-off (PTO)
Rear RPM: 540
Dimensions & Tires
Wheelbase: 78.75 inches [200 cm]
Weight: 2800 to 5630 pounds
Front tire: 5.00x15
Rear tire: 10x24
D12 Serial Numbers
Location: Serial number stamped into the flange where the engine and transmission meet on the left side of the tractor.
Allis Chalmers D12 Power
Engine: 31 hp [23.1 kW]
Drawbar (claimed): 25.75 hp [19.2 kW]
PTO (claimed): 30 hp [22.4 kW]
Drawbar (tested): 29.43 hp [21.9 kW]
PTO (tested): 33.32 hp [24.8 kW]
Mechanical
Chassis: 4x2 2WD
Cab: Open operator station.
Hydraulics
Type: live
Valves: 1 or 2
Belt Pulley
RPM: 1220
Speed: 2556 ft/min [779.07 meters/min]
Battery
Number: 1
Volts: 6
info
Bore/Stroke: 3.375x3.875 inches [86 x 98 mm]
Power: 31 hp [23.1 kW]
Air cleaner: oil bath
Compression: 7.75:1
Rated RPM: 1650
Starter volts: 6
Oil capacity: 4 qts [3.8 L]
Coolant capacity: 8 qts [7.6 L]
Engine Detail
Original engine, used until 149 ci engine appeared in 1961., Allis-Chalmers, gasoline, 4-cylinder, liquid-cooled vertical L-head, 138.7 ci [2.3 L]
info
Speeds: Allis D12 with 10x24 rear tires.
Transmission
Type: sliding gear
Gears: 4 forward and 1 reverse
info
Series back: Allis Chalmers D10
Dimensions
Weight (shipping): 2,800 lbs [1270 kg]
Weight (ballasted): 5,630 lbs [2553 kg]
Wheelbase: 78.75 inches [200 cm]
Length: 121 inches [307 cm]
Height (hood): 52.5 inches [133 cm]
Height (exhaust): 76.5 inches [194 cm]
Clearance (front axle): 20.25 inches [51 cm]
Clearance (rear axle): 22.25 inches [56 cm]
Front tread: 49.3 to 80 inches [125 to 203 cm]
Rear tread: 52 to 79.25 inches [132 to 201 cm]
Allis Chalmers D12 Tires
Ag front: 5.00x15
Ag rear: 10x24