FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
In 1978, serial number 6001, the Allis Chalmers model 7060 received the new Accousta Cab II with console shift, new seating, and new lighting. The tractor's color changed from an orange chassis to black. |
Production | |
Manufacturer: | Allis Chalmers |
Factory: | West Allis, Wisconsin, USA |
Total built: | 7,796 |
Original price (USD): | $48,696 |
Capacity | |
Fuel: | 51 gal [193.0 L], 13 gal [49.2 L] (optional auxiliary tank) |
3-Point Hitch | |
Rear Type: | 3/2 |
Rear lift (at 24"/610mm): | 6,680 lbs [3030 kg] |
Power Take-off (PTO) | |
Rear PTO: | independent |
Rear RPM: | 1000, 540/1000 (optional) |
Dimensions & Tires | |
Wheelbase: | 106 inches [269 cm] |
Weight: | 11530 to 20560 pounds |
Front tire: | 11.00x16 |
Rear tire: | 18.4x38 |
7060 Serial Numbers | |
Location: | Above PTO shield |
Allis Chalmers 7060 Power | |
Engine: | 192 hp [143.2 kW] |
PTO (claimed): | 161 hp [120.1 kW] |
Drawbar (tested): | 141.67 hp [105.6 kW] |
PTO (tested): | 161.51 hp [120.4 kW] |
Mechanical | |
Chassis: | 4x2 2WD |
Final drives: | inboard planetary |
Steering: | hydrostatic power |
Brakes: | differential power wet disc |
Cab: | Accousta cab standard, A/C optional. Accousta cab II available in 1978. |
Hydraulics | |
Type: | closed center |
Valves: | 2 or 3 |
Pump flow: | 22 gpm [83.3 lpm] |
Total flow: | 45 gpm [170.3 lpm] |
Steering flow: | 9.5 gpm [36.0 lpm] |
Electrical | |
Ground: | negative |
Battery | |
Number: | 2, 4 (optional) |
Volts: | 12 |
info | |
Bore/Stroke: | 4.25x5.00 inches [108 x 127 mm] |
Power: | 192 hp [143.2 kW] |
Air cleaner: | dry with pre-cleaner |
Compression: | 16:1 |
Rated RPM: | 2300 |
Firing order: | 1-5-3-6-2-4 |
Starter volts: | 12 |
Oil capacity: | 25 qts [23.7 L] |
Coolant capacity: | 32 qts [30.3 L] |
Intake valve clearance: | 0.015 inches [0.381 mm] (hot) |
Exhaust valve clearance: | 0.015 inches [0.381 mm] (hot) |
Engine Detail | |
Allis Chalmers 670I, intercooled turbocharged diesel, 6-cylinder, liquid-cooled Inline, 426 ci [7.0 L] |
info | |
Allis-Chalmers Power Fluid 821 |
Transmission | |
Transmission: | Allis-Chalmers Power Director |
Type: | partial power shift |
Gears: | 20 forward and 4 reverse |
Oil capacity: | 29.6 qts [28.0 L] |
The Power Director uses a gear shift, range shift, and the two-speed Power Director. The gear shift lever selects one of five forward gears, or reverse. The range shift lever selects between high and low ranges. The tractor must be stopped, and the clutch pedal used, to change the gear or range. Once in motion, the Power Director is operated by means of two foot switches that can be switched, on the move, without the clutch. |
info | |
Previous model: | Allis Chalmers 7050 |
Next model: | Allis Chalmers 8050 |
Series next: | Allis Chalmers 7080 |
Series back: | Allis Chalmers 7045 |
Dimensions | |
Weight (shipping): | 11,530 lbs [5230 kg] |
Weight (operating): | 13,990 lbs [6345 kg] (Power Director), 14,645 lbs [6642 kg] (Power shift) |
Weight (ballasted): | 20,560 lbs [9326 kg] |
Wheelbase: | 106 inches [269 cm] |
Length: | 163 inches [414 cm] |
Width: | 95.5 inches [242 cm], 119.5 inches [303 cm] (optional long axle) |
Height (steering wheel): | 87 inches [220 cm] |
Height (hood): | 69 inches [175 cm] |
Height (exhaust): | 117 inches [297 cm] |
Ground clearance: | 22 inches [55 cm] (front axle), 28 inches [71 cm] (rear axle) |
Rear axle: | 3.75 inch diameter [95 mm] 4.00 inch diameter [101 mm] |
Allis Chalmers 7060 Tires | |
Ag front: | 10.00x16, 14Lx16 |
Ag rear: | 23.1x30, 24.5x32, 30.5x32, 15.5x38, 16.9x38, 20.8x38, 18.4x42 |