FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
1979 - 1985, Compact Utility tractor | |
Next model: | Deutz-Allis 5230 |
Series back: | Allis Chalmers 5020 |
Production | |
Distributor: | Allis Chalmers |
Manufacturer: | Hinomoto |
Factory: | Osaka, Japan |
Original price (USD), $9,230 (1985 ), |
Variants | |
Simplicity 9528, |
Capacity | |
Fuel: | 7 gal [26.5 L] |
Hydraulic system: | 6.7 gal [25.4 L] |
3-Point Hitch | |
Rear Type: | I |
Power Take-off (PTO) | |
Rear PTO: | transmission, live*Optional |
Rear RPM: | 540 |
Dimensions & Tires | |
Wheelbase: | 61.8 inches [156 cm] |
Weight: | 2100 to 2530 pounds |
Front tire: | 5.00-15 |
Rear tire: | 12.4-24 |
5030 Serial Numbers | |
Location: | Under steering wheel |
Allis Chalmers 5030 Power | |
Engine: | 31 hp [23.1 kW] |
Drawbar (claimed): | 22.4 hp [16.7 kW] |
PTO (claimed): | 26 hp [19.4 kW] |
Plows: | 2*12-inch |
Drawbar (tested): | 22.47 hp [16.8 kW] |
PTO (tested): | 26.42 hp [19.7 kW] |
Mechanical | |
Chassis: | 4x2 2WD |
Steering: | mechanical |
Brakes: | differential mechanical drum and shoe |
Cab: | Two-post ROPS, optional ROPS canopy |
Hydraulics | |
Type: | open center |
Capacity: | 6.7 gal [25.4 L] |
Valves: | 0 or 1 |
Pump flow: | 5.44 gpm [20.6 lpm] |
Electrical | |
Ground: | negative |
Charging system: | alternator |
Charging amps: | 12 |
Battery | |
Number: | 1 |
Volts: | 12 |
Amp-hours: | 70 |
info | |
Bore/Stroke: | 3.82x3.94 inches [97 x 100 mm] |
Power: | 31 hp [23.1 kW] |
Air cleaner: | dry |
Compression: | 23:1 |
Rated RPM: | 2500 |
Idle RPM: | 750-2750 |
Starter volts: | 12 |
Oil capacity: | 5 qts [4.7 L] |
Coolant capacity: | 5.3 qts [5.0 L] |
Engine Detail | |
Toyosha S148, diesel, 2-cylinder, liquid-cooled, 90.1 ci [1.5 L] |
info | |
Speeds: | With 12.4x24 rear tires. |
Transmission | |
Type: | sliding gear |
Gears: | 12 forward and 3 reverse |
Clutch: | 215mm dry disc |
Four gears, plus reverse, with high, low, and creeper ranges. |
info | |
Next model: | Deutz-Allis 5230 |
Series back: | Allis Chalmers 5020 |
Dimensions | |
Weight (shipping): | 2100 lbs [952 kg] |
Weight (operating): | 2530 lbs [1147 kg] |
Weight (ballasted): | 3876 lbs [1758 kg] |
Wheelbase: | 61.8 inches [156 cm] |
Length: | 100.4 inches [255 cm] |
Width: | 53.5 inches [135 cm] |
Height (steering wheel): | 53.7 inches [136 cm] |
Height (hood): | 45.1 inches [114 cm] |
Height (ROPS): | 86 inches [218 cm] |
Height (exhaust): | 81.9 inches [208 cm] |
Clearance (front axle): | 14.5 inches [36 cm] |
Clearance (rear axle): | 15.6 inches [39 cm] |
Front tread: | 40.9 to 51.1 inches [103 to 129 cm] |
Rear tread: | 40.9 to 62.5 inches [103 to 158 cm] |
Allis Chalmers 5030 Tires | |
Ag front: | 5.00-15 |
Ag rear: | 12.4-24 |
Lawn/turf front: | 20x8.00-10 |
Lawn/turf rear: | 13.6-16, 20x8.00-10 |
info | |
Matching equipment listed for the Allis 5030 included 60-inch rear mount mowers and a 50-inch tiller. A 72-inch rear blade or 66-inch box scraper were specified. |
Loader | |
Loader type: | Allis Chalmers 430 |
Weight: | 552 lbs [250 kg] |
Height (to pin): | 91 inches [231 cm] |
Dump reach: | 18 inches [45 cm] |
Dump angle: | 45 |
Clearance, level bucket: | 77 inches [195 cm] |
Rollback angle: | 15 |
Breakout force (lift): | 920 lbs [417 kg] |
Lift to full height (at pin): | 720 lbs [326 kg] |
Bucket width: | 48 inches [121 cm] |