FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
The Allis-Chalmers 5020 is the same as the Simplicity 9523 and similar to the Hinomoto E23 and Massey-Ferguson 210. |
Production | |
Distributor: | Allis Chalmers |
Manufacturer: | Hinomoto |
Factory: | Osaka, Japan |
Total built: | 8,500 |
Original price (USD), $8,280 (1985 ), |
Capacity | |
Fuel: | 7 gal [26.5 L] |
Hydraulic system: | 5.5 gal [20.8 L] |
3-Point Hitch | |
Rear Type: | I |
Power Take-off (PTO) | |
Rear PTO: | transmission, live*Optional |
Rear RPM: | 540 |
Engine RPM: | 540@2320 |
Dimensions & Tires | |
Wheelbase: | 59.8 inches [151 cm] |
Weight: | 1900 to 2150 pounds |
Front tire: | 5.00-15 |
Rear tire: | 9.5-24 |
5020 Serial Numbers | |
Location: | Under steering wheel |
Allis Chalmers 5020 Power | |
Engine: | 25 hp [18.6 kW] |
Drawbar (claimed): | 17 hp [12.7 kW] |
PTO (claimed): | 21 hp [15.7 kW] |
Plows: | 1 (14-inch) |
Drawbar (tested): | 17.37 hp [13.0 kW] |
PTO (tested): | 21.79 hp [16.2 kW] |
Mechanical | |
Chassis: | 4x2 2WD, 4x4 MFWD 4WD |
Steering: | manual |
Brakes: | differential mechanical drum and shoe |
Cab: | Two-post ROPS, optional ROPS canopy |
Hydraulics | |
Type: | open center |
Capacity: | 5.5 gal [20.8 L] |
Valves: | 0 or 1 |
Pump flow: | 5.44 gpm [20.6 lpm] |
Electrical | |
Ground: | negative |
Charging system: | alternator |
Charging amps: | 15 |
Battery | |
Number: | 1 |
Volts: | 12 |
Amp-hours: | 70 |
info | |
Bore/Stroke: | 3.62x3.74 inches [92 x 95 mm] |
Power: | 25 hp [18.6 kW] |
Air cleaner: | single paper element |
Compression: | 23.0:1 |
Rated RPM: | 2500 |
Idle RPM: | 750-2750 |
Firing order: | 1-2 |
Starter volts: | 12 |
Oil capacity: | 5 qts [4.7 L] |
Coolant capacity: | 5.3 qts [5.0 L] |
Engine Detail | |
Toyosha S126, diesel, 2-cylinder, liquid-cooled, 77.1 ci [1.3 L] |
info | |
Speeds: | With 9.5-24 rear tires. |
Transmission | |
Transmission: | sliding gear |
Gears: | 8 forward and 2 reverse |
Clutch: | 215mm dry disc |
Oil capacity: | 22 qts [20.8 L] |
Four gears, plus reverse, with high and low ranges. The eight-speed appears to only have been available during early production. |
info | |
Next model: | Deutz-Allis 5220 |
Series next: | Allis Chalmers 5030 |
Series back: | Allis Chalmers 5015 |
Dimensions | |
2WD Weight (shipping): | 1900 lbs [861 kg] |
4WD Weight (shipping): | 2150 lbs [975 kg] |
Weight (operating): | 2060 lbs [934 kg] (2WD) |
Weight (ballasted): | 3358 lbs [1523 kg] |
Wheelbase: | 59.8 inches [151 cm] |
Length: | 98.9 inches [251 cm] |
Width: | 48 inches [121 cm] |
Height (steering wheel): | 59.8 inches [151 cm] |
Height (hood): | 44.7 inches [113 cm] |
Height (ROPS): | 85 inches [215 cm] |
Height (exhaust): | 77.5 inches [196 cm] |
Clearance (front axle): | 12.6 inches [32 cm] |
Clearance (rear axle): | 14 inches [35 cm] |
Front tread: | 38.6 inches [98 cm] |
Rear tread: | 39.2/51 inches [99/129 cm] |
Allis Chalmers 5020 Tires | |
Ag front: | 5.00-15 (2WD), 6.00x14 (4WD) |
Ag rear: | 9.5-24, 11.2x24 |
Lawn/turf front: | 20x8.00-10 |
Lawn/turf rear: | 13.6-16 |
info | |
The Allis-Chalmers was advertised as available with a 72-inch rear blade, 1-bottom (14-inch) plow, 60-inch rear mower, 50-inch tiller, and 60-inch snow thrower. |
60" Mower deck | |
Type: | mid-mount Allis Chalmers 1690373, 3-blade |
Cutting width: | 60 inches [152 cm] |
Weight: | 308 lbs [139 kg] |
Overall width: | 71 inches [180 cm] |
Cut height: | 1.625 to 3.00 inch [4 to 7 cm] |
Loader | |
Loader type: | Allis Chalmers 430 |
Weight: | 552 lbs [250 kg] |
Height (to pin): | 91 inches [231 cm] |
Dump reach: | 18 inches [45 cm] |
Dump angle: | 45 |
Clearance, level bucket: | 77 inches [195 cm] |
Rollback angle: | 15 |
Breakout force (lift): | 920 lbs [417 kg] |
Lift to full height (at pin): | 720 lbs [326 kg] |
Bucket width: | 48 inches [121 cm] |