Allis Chalmers 190XT Specifications - Allis Chalmers 190XT Specs

info
1964 - 1971, Row-Crop tractor
Next model: Allis Chalmers 200
Series back: Allis Chalmers 190
Production
Manufacturer: Allis Chalmers
Factory: West Allis, Wisconsin, USA
Total built: 22419
Original price (USD): $8,672
Capacity
Fuel: 48 gal [181.7 L] (gas/diesel), 52 gal [196.8 L] (LP gas)
Hydraulic system: 9 gal [34.1 L]
Rear Hitch
Type: Allis Snap-Coupler
3-Point Hitch
Rear Type: II
Power Take-off (PTO)
Rear PTO: live
Rear RPM: 540, 1000, 540/1000
Dimensions & Tires
Wheelbase: 105 inches [266 cm]
Weight: 7675 to 7945 pounds
Front tire: 7.50-16
Rear tire: 18.4-34
190XT Serial Numbers
Location: Torque housing
Allis Chalmers 190XT Power
Drawbar (tested): 79.12 hp [59.0 kW]
PTO (tested): 93.64 hp [69.8 kW]
Mechanical
Chassis: 4x2 2WD
Steering: hydraulic power assist
Brakes: differential band actuated disc
Cab: Open operator station. Factory cab available starting in 1965.
Hydraulics
Type: open center
Capacity: 9 gal [34.1 L]
Pressure: 2000 psi [137.9 bar]
Pump flow: 12 gpm [45.4 lpm]
Steering flow: 12 gpm [45.4 lpm]
Belt Pulley
Diameter: 9 inches [22 cm]
Width: 6.6 inches [16 cm]
RPM: 1845
Speed: 4347 ft/min [1324.97 meters/min]
Electrical
Ground: negative
Charging system: generator
Battery
Number: 1 (gas), 2 (diesel)
Volts: 12
Amp-hours: 53 (gas), 95 (gas optional), 190 (diesel)
info
Bore/Stroke: 3.875x4.25 inches [98 x 108 mm]
Air cleaner: dry
Compression: 8:1
Rated RPM: 2200
Firing order: 1-5-3-6-2-4
Starter volts: 12
Oil capacity: 12 qts [11.4 L]
Coolant capacity: 18 qts [17.0 L]
Sparkplug gap: 0.025 inches [0.635 mm]
Point gap: 0.016 inches [0.406 mm]
Intake valve clearance: 0.020 inches [0.508 mm] (hot)
Exhaust valve clearance: 0.025 inches [0.635 mm] (hot)
Engine Detail
Allis Chalmers G2800, gasoline, 6-cylinder, liquid-cooled, 301 ci [4.9 L]
info
Speeds: With 15.5-38 rear tires.
Transmission
Transmission: Power Director
Type: two-speed power shift
Gears: 8 forward and 2 reverse
Oil capacity: 32 qts [30.3 L], 38 qts [36.0 L] (S/N 23000 and up)
The transmission is controlled by means of the gear shift lever and the Power Director lever. The tractor must be stopped, and clutch used, to select one of four forward gears, or reverse. The Power Director lever has high, low, and neutral positions. The Power Director can be shifted on the move without clutching. Placing the Power Director into neutral causes the tractor to stop while keeping the PTO engaged.
info
Next model: Allis Chalmers 200
Series back: Allis Chalmers 190
Dimensions
Weight (operating): 7,675 lbs [3481 kg] (gas), 7,715 lbs [3499 kg] (LP gas), 7,945 lbs [3603 kg] (diesel)
Weight (ballasted): 11,300 lbs [5125 kg]
Wheelbase: 105 inches [266 cm]
Allis Chalmers 190XT Tires
Ag front: 7.50-16
Ag rear: 18.4-34