Case/Case IH 630 Specifications - Case/Case IH 630 Specs

info
A high-speed fourth gear was optional in most 630 series transmissions, an H would appear at the end of the model number to inidcate this option.
Production
Manufacturer: J.I. Case
Factory: Rock Island, Illinois, USA, Racine, Wisconsin, USA
Total built: 1,181
Original price (USD): $4,500
Variants
630: diesel standard
631: diesel row-crop
640: gas standard
641: gas row-crop
Capacity
Fuel: 22 gal [83.3 L]
Rear Hitch
Type: Case Eagle Hitch
Power Take-off (PTO)
Rear PTO: continuous, independent (Case-o-matic)
Rear RPM: 540 (1.375), 540/1000 (1.375)
Dimensions & Tires
Weight: 4600 to 4800 pounds
Front tire: 7.50-16
Rear tire: 16.9-28
630 Serial Numbers
Location: instrument panel
J.I. Case 630 Power
Belt (claimed): 50 hp [37.3 kW]
Plows: 4
Drawbar (tested): 43.71 hp [32.6 kW]
PTO (tested): 48.85 hp [36.4 kW]
Mechanical
Chassis: 4x2 2WD
Steering: power assist
Brakes: differential mechanical dry disc
Cab: Open operator station.
Hydraulics
Type: Dual-Control
Belt Pulley
Diameter: 9.25 inches [23 cm]
Width: 6 inches [15 cm]
Electrical
Ground: positive
Battery
Number: 2
Volts: 6
info
Bore/Stroke: 3.8125x4.125 inches [97 x 105 mm]
Compression: 17.5:1
Rated RPM: 2250
Starter volts: 12
Engine Detail
J.I. Case, diesel, 4-cylinder, liquid-cooled, 188.4 ci [3.1 L]
Transmission
Transmission: Case Case-o-matic
Type: torque converter
Gears: 8 forward and 2 reverse
Clutch: hydraulic wet disc
Tractors equipped with the Case-o-Matic were sometimes referred to as the 630C.
Dimensions
Weight (operating): 4,600 lbs [2086 kg], 4,800 lbs [2177 kg] (Case-o-Matic)
Weight (ballasted): 9,725 lbs [4411 kg]
Front tread: 52 inches [132 cm]
Rear tread: 48 to 76 inches [121 to 193 cm]
J.I. Case 630 Tires
Ag front: 7.50-16
Ag rear: 16.9-28