FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
While an entire series of tractors was referred to as Case 400, the actual Case model 400 tractor was the standard-tread diesel version. The tractors in the 400 series are identified by a two-digit code (4xx). The second digit indicates the engine type: 0 for diesel (40x) and 1 for gas/lp (41x). The third digit indicates the chassis type: 0 for standard (4x0), 1 for row-crop (4x1), 3 for high-crop (4x3). |
Production | |
Manufacturer: | J.I. Case |
Factory: | Racine, Wisconsin, USA |
Total built: | 2,077 |
Original price (USD): | $4,400 (1958) |
Variants | |
400: | diesel standard |
401: | diesel row-crop |
402: | diesel vineyard |
403: | diesel high-crop |
405: | diesel orchard |
410: | gasoline standard |
411: | gas row-crop |
413: | gas high-crop |
420: | diesel industrial |
Capacity | |
Fuel: | 21 gal [79.5 L] |
Hydraulic system: | 2.25 gal [8.5 L], 2.6 gal [9.8 L] (with Eagle Hitch) |
Rear Hitch | |
Type: | Case Eagle Hitch |
Power Take-off (PTO) | |
Rear PTO: | independent |
Rear RPM: | 540 |
Dimensions & Tires | |
Wheelbase: | 82 inches [208 cm] |
Weight: | 5600 to 6000 pounds |
Front tire: | 6.00-16 |
Rear tire: | 13-30 |
400 Serial Numbers | |
Location: | Top-right of instrument panel. |
J.I. Case 400 Power | |
Belt (claimed): | 50 hp [37.3 kW] |
Plows: | 4 (14-inch) |
Mechanical | |
Chassis: | 4x2 2WD |
Steering: | manual, power optional |
Brakes: | mechanical dry discs |
Cab: | Open operator station. |
Hydraulics | |
Capacity: | 2.25 gal [8.5 L], 2.6 gal [9.8 L] (with Eagle Hitch) |
Pressure: | 600 psi [41.4 bar] |
Valves: | 2 (optional) |
Total flow: | 12 gpm [45.4 lpm] |
Belt Pulley | |
Diameter: | 10.5 inches [26 cm] |
Width: | 7.25 inches [18 cm] |
RPM: | 1128 |
Speed: | 3,101 ft/min [945.18 meters/min] |
Electrical | |
Ground: | negative |
Charging system: | generator |
Charging volts: | 12 |
Battery | |
Number: | 2 |
Volts: | 6 |
Amp-hours: | 150 |
info | |
Bore/Stroke: | 4.00x5.00 inches [102 x 127 mm] |
Air cleaner: | oil bath |
Pre-heating: | ether capsules |
Compression: | 15:1 |
Rated RPM: | 1500 |
Idle RPM: | 600-1600 |
Firing order: | 1-3-4-2 |
Starter volts: | 12 |
Oil capacity: | 9 qts [8.5 L] |
Oil change: | 120 h |
Coolant capacity: | 29.6 qts [28.0 L] |
Intake valve clearance: | 0.012 inches [0.305 mm] (cold) |
Exhaust valve clearance: | 0.012 inches [0.305 mm] (cold) |
Engine Detail | |
J.I. Case, diesel, 4-cylinder 8-valve, liquid-cooled, 251 ci [4.1 L] |
info | |
SAE 90 |
Transmission | |
Transmission: | Powr-range |
Gears: | 8 forward and 2 reverse |
Oil capacity: | 60 qts [56.8 L] |
Four gears plus reverse, with high and low ranges. All gears and ranges selected by a single lever. A "belt-neutral" position lies between the high and low ranges, intended for stationary work. Gears 7, 8, and high reverse are locked out on tractors equipped with steel wheels. |
info | |
Next model: | J.I. Case 700-B |
Dimensions | |
Weight: | 6,000 lbs [2721 kg] |
Weight (shipping): | 5,600 lbs [2540 kg] |
Wheelbase: | 82 inches [208 cm] |
Length: | 133 inches [337 cm] |
Width: | 66.6 inches [169 cm] |
Height (steering wheel): | 61.9 inches [157 cm] |
Height (hood): | 61 inches [154 cm] |
Height (exhaust): | 89 inches [226 cm] |
Clearance (front axle): | 17.4 inches [44 cm] |
Front tread: | 52 to 58 inches [132 to 147 cm] |
Rear tread: | 52 to 64 inches [132 to 162 cm] |
J.I. Case 400 Tires | |
Ag front: | 7.50-16 |
Ag rear: | 14-30, 50" (steel) |