Steiger 600 Specifications - Steiger 600 Specs

info
The Case IH Steiger 600 was awarded an ASABE AE50 award for innovation in 2012.
Production
Manufacturer: CaseIH
Factory: Fargo, North Dakota, USA
Variants
600: wheeled tractor
600QT: crawler tractor
Capacity
Fuel: 455 gal [1722.2 L]
Exhaust fluid (DEF): 62 gal [234.7 L]
3-Point Hitch
Rear Type: 4N
Rear lift: 19,620 lbs [8899 kg]
Power Take-off (PTO)
Rear PTO: independent
Rear RPM: 1000 (1-3/4)
Dimensions & Tires
Wheelbase: 154 inches [391 cm]
Weight: 45868 to 66000 pounds
Steiger 600 Serial Numbers
Location: Serial number plate on the front left tractor fender, near the steps.
- Serial numbers unknown -
CaseIH Steiger 600 Power
Engine: 600 hp [447.4 kW]
PTO (claimed): 520 hp [387.8 kW]
Drawbar (tested): 490.42 hp [365.7 kW]
PTO (tested): 530.73 hp [395.8 kW]
Mechanical
Chassis: 4x4 articulated 4WD
Cab: Surveyor cab standard.
Hydraulics
Type: pressure flow compensating (PFC)
Rear valves: 4 to 8
Pump flow: 35 gpm [132.5 lpm]
Total flow: 42 gpm [159.0 lpm], 56 gpm [212.0 lpm] (High Flow), 113 gpm [427.7 lpm] (Twin Flow)
Electrical
Ground: negative
Charging system: alternator
Charging amps: 200
Battery
Number: 2
Cold-cranking amps: 1000
Volts: 12
info
Bore/Stroke: 5.315x5.906 inches [135 x 150 mm]
Emissions: Interim Tier 4
Emission control: selective catalytic reduction (SCR)
Power: 600 hp [447.4 kW]
Maximum Power: 660 hp [492.2 kW]
Rated RPM: 2100
Starter type: electric
Engine Detail
Iveco, two-stage turbocharged intercooled and aftercooled diesel, 6-cylinder 24-valve, liquid-cooled, 787 ci [12.9 L]
info
Next model: CaseIH Steiger 620
Series back: CaseIH Steiger 550
Transmission
Type: full power shift
Gears: 16 forward and 2 reverse
Clutch: electro-hydraulic wet discs
info
Next model: CaseIH Steiger 620
Series back: CaseIH Steiger 550
Dimensions
Weight: 45,868 lbs [20805 kg] (dual 710/70R42)
Weight (ballasted): 66,000 lbs [29937 kg]
Wheelbase: 154 inches [391 cm]
Rear axle: 5.5 by 120 inches [139x3048 mm]