Puma 215 Specifications - Puma 215 Specs

info
During official testing, the Puma 215 was unable to meet advertised claims for hydraulic flow and three-point lift.
Production
Manufacturer: CaseIH
Factory: Basildon, England
Capacity
Fuel: 104 gal [393.6 L]
Exhaust fluid (DEF): 13.2 gal [50.0 L]
Hydraulic system: 22 gal [83.3 L]
3-Point Hitch
Rear Type: 2/3N
Rear lift: 10,200 lbs [4626 kg], 13,400 lbs [6078 kg] *Optional
Power Take-off (PTO)
Rear PTO: independent
Rear RPM: 540/1000 (1.375), 1000 (1.75), 1000/1000E
Dimensions & Tires
Wheelbase: 113.6 inches [288 cm]
Weight: 17880 lbs [8110 kg]
Puma 215 Serial Numbers
- Serial numbers unknown -
CaseIH Puma 215 Power
Engine (gross): 215 hp [160.3 kW]
Engine (max): 260 hp [193.9 kW]
PTO (claimed): 180 hp [134.2 kW]
Drawbar (tested): 171.1 hp [127.6 kW]
PTO (tested): 210.4 hp [156.9 kW]
Mechanical
Chassis: 4x4 MFWD 4WD
Steering: hydrostatic power
Cab: Cab standard. Optional cab suspension.
Hydraulics
Type: closed center pressure flow compensating (PFC)
Capacity: 22 gal [83.3 L]
Rear valves: 3 to 4 (mechanical), 3 to 5 (electronic)
Pump flow: 32 gpm [121.1 lpm] (powershift), 35 gpm [132.5 lpm] (CVT/opt-PS), 40 gpm [151.4 lpm] (CVT opt)
Total flow: 49 gpm [185.5 lpm] (powershift), 52 gpm [196.8 lpm] (CVT/opt-PS), 57 gpm [215.7 lpm] (CVT opt)
Steering flow: 17 gpm [64.3 lpm]
Electrical
Ground: negative
Charging system: alternator
Charging amps: 150, 200*Optional
Battery
Cold-cranking amps: 1300
Volts: 12
info
Bore/Stroke: 4.094x5.197 inches [104 x 132 mm]
Emissions: Interim Tier 4
Emission control: selective catalytic reduction (SCR)
Rated Power (ECE R120): 215 hp [160.3 kW]
Maximum Power (ECE R120): 260 hp [193.9 kW]
Air cleaner: dual paper elements
Rated RPM: 2200
Starter: electric
Starter volts: 12
Oil capacity: 16 qts [15.1 L]
Engine Detail
FPT, turbocharged diesel, 6-cylinder 24-valve, liquid-cooled, 410.6 ci [6.7 L]
info
Previous model: CaseIH Puma 210
Next model: CaseIH Puma 220
Series next: CaseIH Puma 230
Series back: CaseIH Puma 200
Transmission
Type: full power shift
Gears: 18 forward and 6 reverse
Clutch: electro-hydraulic wet disc
info
Previous model: CaseIH Puma 210
Next model: CaseIH Puma 220
Series next: CaseIH Puma 230
Series back: CaseIH Puma 200
Dimensions
Weight (operating): 17880 lbs [8110 kg]
Wheelbase: 113.6 inches [288 cm]
Rear axle: Bar: 4.125 by 112 inches [104x2844 mm] Bar: 4.125 by 98 inches [104x2489 mm] Bar: 4.125 by 119 inches [104x3022 mm]
Front tread: 60 to 88 inches [152 to 223 cm]
info
Previous model: CaseIH Puma 210
Next model: CaseIH Puma 220
Series next: CaseIH Puma 230
Series back: CaseIH Puma 200
Loader
Loader type: Case IH L780
Height (to pin): 194 inches [492 cm]
Clearance, dumped bucket: 157 inches [398 cm]
Dump reach: 29 inches [73 cm]
Dump angle: 52
Reach at ground: 117 inches [297 cm]
Rollback angle: 45
Breakout force (at pin): 7408 lbs [3360 kg]
Breakout force (at 800mm): 9237 lbs [4189 kg]
Lift to full height (at pin): 7408 lbs [3360 kg]
Lift to full height (at 800mm): 6768 lbs [3069 kg]