FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 2011 - 2013 Puma Series, Row-Crop tractor | |
| Previous model: | CaseIH Puma 165 |
| Series next: | CaseIH Puma 185 |
| Series back: | CaseIH Puma 160 |
| Production | |
| Manufacturer: | CaseIH |
| Factory: | Basildon, England |
| Capacity | |
| Fuel: | 104 gal [393.6 L] |
| Exhaust fluid (DEF): | 13.2 gal [50.0 L] |
| Hydraulic system: | 22 gal [83.3 L] |
| 3-Point Hitch | |
| Rear Type: | 2/3N |
| Rear lift: | 10,200 lbs [4626 kg], 13,400 lbs [6078 kg] (optional) |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 540/1000 (1.375), 1000 (1.75), 1000/1000E |
| Dimensions & Tires | |
| Wheelbase: | 113.6 inches [288 cm] |
| Weight: | 18740 lbs [8500 kg] |
| Puma 170 Serial Numbers | |
| - Serial numbers unknown - |
| CaseIH Puma 170 Power | |
| Engine (gross): | 167 hp [124.5 kW] |
| Engine (max): | 218 hp [162.6 kW] |
| PTO (claimed): | 135 hp [100.7 kW] |
| Drawbar (tested): | 132.8 hp [99.0 kW] |
| PTO (tested): | 172.2 hp [128.4 kW] |
| Mechanical | |
| Chassis: | 4x4 MFWD 4WD |
| Steering: | hydrostatic power |
| Cab: | Cab standard. Optional cab suspension. |
| Hydraulics | |
| Type: | closed center pressure flow compensating (PFC) |
| Capacity: | 22 gal [83.3 L] |
| Rear valves: | 3 to 4 (mechanical), 3 to 5 (electronic) |
| Pump flow: | 32 gpm [121.1 lpm] (powershift), 35 gpm [132.5 lpm] (CVT/opt-PS), 40 gpm [151.4 lpm] (CVT opt) |
| Total flow: | 49 gpm [185.5 lpm] (powershift), 52 gpm [196.8 lpm] (CVT/opt-PS), 57 gpm [215.7 lpm] (CVT opt) |
| Steering flow: | 17 gpm [64.3 lpm] |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 150, 200*Optional |
| Battery | |
| Cold-cranking amps: | 1300 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 4.094x5.197 inches [104 x 132 mm] |
| Emissions: | Interim Tier 4 |
| Emission control: | selective catalytic reduction (SCR) |
| Rated Power (ECE R120): | 167 hp [124.5 kW] |
| Maximum Power (ECE R120): | 218 hp [162.6 kW] |
| Air cleaner: | dual paper elements |
| Rated RPM: | 2200 |
| Starter: | electric |
| Starter volts: | 12 |
| Oil capacity: | 16 qts [15.1 L] |
| Engine Detail | |
| FPT, turbocharged diesel, 6-cylinder 24-valve, liquid-cooled, 410.6 ci [6.7 L] |
| info | |
| Previous model: | CaseIH Puma 165 |
| Series next: | CaseIH Puma 185 |
| Series back: | CaseIH Puma 160 |
| Transmission | |
| Type: | full power shift |
| Gears: | 18 forward and 6 reverse |
| Clutch: | electro-hydraulic wet disc |
| info | |
| Previous model: | CaseIH Puma 165 |
| Series next: | CaseIH Puma 185 |
| Series back: | CaseIH Puma 160 |
| Dimensions | |
| Weight (operating): | 18740 lbs [8500 kg] |
| Wheelbase: | 113.6 inches [288 cm] |
| Rear axle: | Bar: 4.125 by 112 inches [104x2844 mm] Bar: 4.125 by 98 inches [104x2489 mm] Bar: 4.125 by 119 inches [104x3022 mm] |
| Front tread: | 60 to 88 inches [152 to 223 cm] |
| info | |
| Previous model: | CaseIH Puma 165 |
| Series next: | CaseIH Puma 185 |
| Series back: | CaseIH Puma 160 |
| Loader | |
| Loader type: | Case IH L770 |
| Height (to pin): | 178 inches [452 cm] |
| Clearance, dumped bucket: | 140 inches [355 cm] |
| Dump reach: | 29 inches [73 cm] |
| Dump angle: | 55 |
| Reach at ground: | 113 inches [287 cm] |
| Rollback angle: | 43 |
| Breakout force (at pin): | 6650 lbs [3016 kg] |
| Breakout force (at 800mm): | 5800 lbs [2630 kg] |
| Lift to full height (at pin): | 5450 lbs [2472 kg] |
| Lift to full height (at 800mm): | 4900 lbs [2222 kg] |