FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 2011 - 2013 Puma Series, Row-Crop tractor | |
| Previous model: | CaseIH Puma 155 |
| Next model: | CaseIH Puma 165 |
| Series next: | CaseIH Puma 170 |
| Series back: | CaseIH Puma 145 |
| Production | |
| Manufacturer: | CaseIH |
| Capacity | |
| Fuel: | 86 gal [325.5 L] |
| Exhaust fluid (DEF): | 12.7 gal [48.1 L] |
| Hydraulic system: | 20.5 gal [77.6 L] |
| 3-Point Hitch | |
| Rear Type: | 2/3N |
| Rear lift: | 7,900 lbs [3583 kg], 9,200 lbs [4173 kg] (optional) |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 540/1000 (1.75) |
| Dimensions & Tires | |
| Wheelbase: | 107.6 inches [273 cm], 109.8 inches [278 cm] (suspended front axle) |
| Weight: | 16360 lbs [7420 kg] |
| Puma 160 Serial Numbers | |
| - Serial numbers unknown - |
| CaseIH Puma 160 Power | |
| Engine (gross): | 160 hp [119.3 kW] |
| Engine (max): | 203 hp [151.4 kW] |
| PTO (claimed): | 135 hp [100.7 kW] |
| Drawbar (tested): | 118.5 hp [88.4 kW] |
| PTO (tested): | 155.8 hp [116.2 kW] |
| Mechanical | |
| Chassis: | 4x4 MFWD 4WD |
| Cab: | Cab standard. Optional cab suspension. |
| Hydraulics | |
| Type: | closed center pressure flow compensating (PFC) |
| Capacity: | 20.5 gal [77.6 L] |
| Rear valves: | 3 to 4 (mechanical), 3 to 5 (electronic) |
| Pump flow: | 29 gpm [109.8 lpm], 32 gpm [121.1 lpm] (optional) |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 150, 200*Optional |
| Battery | |
| Number: | 2 |
| Cold-cranking amps: | 650 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 4.094x5.197 inches [104 x 132 mm] |
| Emissions: | Interim Tier 4 |
| Emission control: | selective catalytic reduction (SCR) |
| Rated Power (ECE R120): | 160 hp [119.3 kW] |
| Maximum Power (ECE R120): | 203 hp [151.4 kW] |
| Rated RPM: | 2200 |
| Starter: | electric |
| Starter volts: | 12 |
| Oil capacity: | 16 qts [15.1 L] |
| Engine Detail | |
| FPT, turbocharged diesel, 6-cylinder, liquid-cooled, 410.6 ci [6.7 L] |
| info | |
| Previous model: | CaseIH Puma 155 |
| Next model: | CaseIH Puma 165 |
| Series next: | CaseIH Puma 170 |
| Series back: | CaseIH Puma 145 |
| Transmission | |
| Type: | full power shift |
| Gears: | 18 forward and 6 reverse |
| Clutch: | electro-hydraulic wet disc |
| info | |
| Previous model: | CaseIH Puma 155 |
| Next model: | CaseIH Puma 165 |
| Series next: | CaseIH Puma 170 |
| Series back: | CaseIH Puma 145 |
| Dimensions | |
| Weight (operating): | 16360 lbs [7420 kg] |
| Wheelbase: | 107.6 inches [273 cm], 109.8 inches [278 cm] (suspended front axle) |
| Rear axle: | Flange Bar: 3.625 by 98 inches [92x2489 mm] Bar: 3.625 by 112 inches [92x2844 mm] |
| Front tread: | 61.4 to 88.8 inches [155 to 225 cm] |
| info | |
| Previous model: | CaseIH Puma 155 |
| Next model: | CaseIH Puma 165 |
| Series next: | CaseIH Puma 170 |
| Series back: | CaseIH Puma 145 |
| Loader | |
| Loader type: | Case IH L760 |
| Height (to pin): | 169 inches [429 cm] |
| Clearance, dumped bucket: | 131 inches [332 cm] |
| Dump reach: | 29 inches [73 cm] |
| Dump angle: | 56 |
| Reach at ground: | 104 inches [264 cm] |
| Rollback angle: | 41 |
| Breakout force (at pin): | 5800 lbs [2630 kg] |
| Breakout force (at 800mm): | 6300 lbs [2857 kg] |
| Lift to full height (at pin): | 5350 lbs [2426 kg] |
| Lift to full height (at 800mm): | 4650 lbs [2109 kg] |