FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
The Challenger MT545B is similar to the Massey Ferguson 7480. |
Production | |
Manufacturer: | Challenger (a part of AGCO) |
Factory: | Beauvais, France |
Capacity | |
Fuel: | 71 gal [268.7 L] |
Hydraulic system: | 18.5 gal [70.0 L] (AutoPower), 26.4 gal [99.9 L] (CVT) |
3-Point Hitch | |
Rear Type: | II/III |
Rear lift (at 24"/610mm): | 9,391 lbs [4259 kg], 11,200 lbs [5080 kg] (CVT) |
Front Hitch: | optional |
Front lift: | 5,500 lbs [2494 kg] |
Power Take-off (PTO) | |
Rear PTO: | independent |
Clutch: | electro-hydraulic wet disc |
Rear RPM: | 540/1000 (standard), 540/540E/1000*Optional |
Engine RPM: | 540@1980 540E@1533 1000@2000 1000E@1548 |
Dimensions & Tires | |
Wheelbase: | 112.1 inches [284 cm] |
Weight: | 11052 to 14835 pounds |
Front tire: | 11.00-16 |
Rear tire: | 580/70R38 |
Challenger MT545B Power | |
Engine: | 143 hp [106.6 kW] |
PTO (claimed): | 115 hp [85.8 kW] |
Drawbar (tested): | 100.4 hp [74.9 kW] |
PTO (tested): | 125.7 hp [93.7 kW] |
Mechanical | |
Chassis: | 4x2 2WD, 4x4 MFWD 4WD |
Final drives: | inboard planetary |
Differential lock: | electro-hydraulic front and rear |
Steering: | power |
Brakes: | hydraulic wet disc |
Trailer brakes: | hydraulic*Optional |
Cab: | Cab standard with heat and A/C. Optional pneumatic cab suspension and automatic climate control. |
Hydraulics | |
Type: | closed center pressure flow compensating (PFC) |
Capacity: | 18.5 gal [70.0 L] (AutoPower), 26.4 gal [99.9 L] (CVT) |
Pressure: | 2900 psi [200.0 bar] |
Rear valves: | 2 to 4 |
Total flow: | 29 gpm [109.8 lpm] |
Electrical | |
Ground: | negative |
Charging system: | alternator |
Charging amps: | 120 |
Battery | |
Number: | 2 |
Cold-cranking amps: | 420 |
Volts: | 12 |
info | |
Bore/Stroke: | 3.937x5.00 inches [100 x 127 mm] |
Emissions: | Tier II |
Power: | 143 hp [106.6 kW] |
Cooling system: | viscous fan |
Air cleaner: | dual paper elements |
Compression: | 17.5:1 |
Rated RPM: | 2200 |
Idle RPM: | 800-2350 |
Starter volts: | 12 |
Oil capacity: | 15.3 qts [14.5 L] |
Coolant capacity: | 26.92 qts [25.5 L] |
Engine Detail | |
Caterpillar 3056C, turbocharged diesel, 6-cylinder, liquid-cooled vertical inline, 365.2 ci [6.0 L] |
info | |
Speeds: | With 20.8R38 rear tires. |
Transmission | |
Transmission: | AutoPower IV |
Type: | partial power shift |
Gears: | 32 forward and reverse |
Clutch: | hydraulic wet disc |
Four synchronized gears (1-4) in two synchronized ranges (low/high) with a four-speed (A-D) power shift on the left-hand power shuttle lever. |
info | |
Previous model: | Challenger MT545 |
Series next: | Challenger MT555B |
Series back: | Challenger MT535B |
Dimensions | |
Weight (shipping): | 11,052 lbs [5013 kg] (2WD), 11,949 lbs [5420 kg] (4WD), 13,410 lbs [6082 kg] (CVT 4WD) |
Weight (operating): | 13,140 lbs [5960 kg] (2WD), 13,215 lbs [5994 kg] (4WD), 14,835 lbs [6729 kg] (CVT 4WD) |
Drawbar capacity: | 3821 lbs [1733 kg] |
2WD Front axle load: | 4652 lbs [2110 kg] |
4WD Front axle load: | 7496 lbs [3400 kg] |
Rear axle load: | 12897 lbs [5850 kg] |
Wheelbase: | 112.1 inches [284 cm] |
Length: | 168.5 inches [427 cm] |
Width: | 81.1 inches [205 cm] |
Height (cab): | 112.8 inches [286 cm] |
Clearance (drawbar): | 15.4 inches [39 cm] |
Rear axle: | Bar: 3.2 by 82 inches [81x2082 mm] Bar: 3.2 by 113 inches [81x2870 mm] Flange*Optional |
2WD [162 to 210 cm] 2WD} 73.2 to 96 inches (wide row-crop axle) {2WD} [185 to 243 cm] (wide row-crop axle) {2WD} 61.2 to 89.2 inches {4WD} [155 to 226 cm] {4WD} Front tread: | 64.1 to 83 inches |
Rear tread: | 55.5 to 91 inches (short bar) [140 to 231 cm] (short bar) 55.5 to 116.3 inches (long bar) [140 to 295 cm] (long bar) 56.9 to 90.6 inches (flange) [144 to 230 cm] (flange) |
Challenger MT545B Tires | |
Ag front: | 11.00-16 (2WD), 480/70R28 |
Ag rear: | 580/70R38 |