FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 2014 - 2016 MT400D Series, Utility tractor | |
| Next model: | Challenger MT485E |
| Series next: | Challenger MT495D |
| Series back: | Challenger MT475D |
| Production | |
| Manufacturer: | AGCO |
| Capacity | |
| Fuel: | 64 gal [242.2 L] |
| Exhaust fluid (DEF): | 9.2 gal [34.8 L] |
| Drawbar | |
| Drawbar: | Cat. 2 |
| 3-Point Hitch | |
| Rear Type: | III/II |
| Control: | electronic lower link draft sensing |
| Rear lift (at 24"/610mm): | 11400 lbs [5171 kg] |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 540/1000, 540/540E/1000, 540/540E/1000/1000E |
| Dimensions & Tires | |
| Wheelbase: | 105 inches [266 cm] |
| Weight: | 12500 lbs [5670 kg] |
| MT485D Serial Numbers | |
| - Serial numbers unknown - |
| Challenger MT485D Power | |
| Engine (gross): | 135 hp [100.7 kW] |
| PTO (claimed): | 110 hp [82.0 kW] (AutoPower IV), 110 hp [82.0 kW] (Techstar CVT), 115 hp [85.8 kW] (AutoPower IV) |
| Drawbar (tested): | 99.0 hp [73.8 kW] |
| PTO (tested): | 136.9 hp [102.1 kW] |
| Mechanical | |
| Chassis: | 4x4 MFWD 4WD |
| Steering: | hydrostatic power |
| Brakes: | wet disc |
| Cab: | Cab standard with air-conditioning. |
| Hydraulics | |
| Type: | closed center load sensing (CCLS), open center optional |
| Valves: | 2 to 4 |
| SCV flow: | 15 gpm [56.8 lpm] (open center), (26 gpm [0.0 lpm] (open twin flow), 29 gpm [109.8 lpm] (CCLS) |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 175, 240 (2x 120), 350 (2x 175) |
| Battery | |
| Number: | 2 |
| Cold-cranking amps: | 600 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 4.251x5.276 inches [108 x 134 mm] |
| Emissions: | Interim Tier IV |
| Emission control: | selective catalytic reduction (SCR) |
| Power (gross): | 135 hp [100.7 kW] (AutoPower IV), 140 hp [104.4 kW] |
| Fuel system: | electronic high pressure common rail |
| Air cleaner: | dual dry element |
| Pre-heating: | thermostart |
| Rated RPM: | 2200 |
| Starter: | electric |
| Starter volts: | 12 |
| Engine Detail | |
| AGCO Power 49AWI, turbocharged air-to-air intercooled diesel, 4-cylinder 16-valve, liquid-cooled, 299 ci [4.9 L] |
| info | |
| Next model: | Challenger MT485E |
| Series next: | Challenger MT495D |
| Series back: | Challenger MT475D |
| Transmission | |
| Transmission: | AutoPower IV |
| Type: | four speed power shift |
| Gears: | 16 forward and reverse |
| Clutch: | wet disc |
| Four power shift gears in four ranges. | |
| info | |
| Next model: | Challenger MT485E |
| Series next: | Challenger MT495D |
| Series back: | Challenger MT475D |
| Dimensions | |
| Weight (shipping): | 12500 lbs [5670 kg] |
| Wheelbase: | 105 inches [266 cm] |
| Rear axle: | Flange Bar: 3.23 by 80 inches [82x2032 mm] Bar: 3.23 by 105 inches [82x2667 mm] Bar: 3.74 by 90 inches [94x2286 mm] Bar: 3.74 by 113 inches [94x2870 mm] |