FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
The Challenger MT465B is similar to the Massey Ferguson 5460. |
Production | |
Manufacturer: | Challenger (a part of AGCO) |
Factory: | Beauvais, France |
Capacity | |
Fuel: | 40 gal [151.4 L] |
3-Point Hitch | |
Rear Type: | II |
Control: | electronic top-link draft control |
Rear lift (at 24"/610mm): | 7285 lbs [3304 kg] |
Rear Arms: | telescopic stabilizers and link ends |
Power Take-off (PTO) | |
Rear PTO: | independent |
Clutch: | electro-hydraulic wet disc |
Rear RPM: | 540/1000, 540/540E/1000/1000E |
Dimensions & Tires | |
Wheelbase: | 97 inches [246 cm] |
Weight: | 9170 to 9975 pounds |
Front tire: | 10.00-16 |
Rear tire: | 18.4R38 |
Challenger MT465B Power | |
Engine: | 105 hp [78.3 kW] |
PTO (claimed): | 90 hp [67.1 kW] |
Drawbar (tested): | 73.0 hp [54.4 kW] |
PTO (tested): | 98.6 hp [73.5 kW] |
Mechanical | |
Chassis: | 4x2 2WD, 4x4 MFWD 4WD |
Final drives: | inboard planetary |
Differential lock: | electro-hydraulic |
Steering: | hydrostatic power |
Brakes: | hydraulic wet disc |
Cab: | ROPS. Cab optional with air-conditioning. |
Hydraulics | |
ROPS Type: | open center |
Cab Type: | closed center load sensing |
Pressure: | 2900 psi [200.0 bar] |
Valves: | 2 to 4 |
Pump flow: | 26.4 gpm [99.9 lpm] (open center), 29 gpm [109.8 lpm] (CCLS) |
Electrical | |
Ground: | negative |
Battery | |
Volts: | 12 |
info | |
Bore/Stroke: | 4.134x5.00 inches [105 x 127 mm] |
Emissions: | Tier 2 |
Power: | 105 hp [78.3 kW] |
Air cleaner: | dual paper elements |
Compression: | 17.5:1 |
Rated RPM: | 2200 |
Starter volts: | 12 |
Engine Detail | |
This engine was alternative branded as a Perkins 1104C depending on market., Caterpillar 3054T, turbocharged diesel, 4-cylinder, liquid-cooled vertical, 268 ci [4.4 L] |
info | |
Previous model: | Challenger MT465 |
Series back: | Challenger MT455B |
Transmission | |
Transmission: | Autopower IV |
Type: | four speed power shift |
Gears: | 16 forward and reverse |
Clutch: | wet disc |
Four power shift gears in four ranges. |
info | |
Previous model: | Challenger MT465 |
Series back: | Challenger MT455B |
Dimensions | |
Weight (operating): | 9,170 lbs [4159 kg] (2WD), 9,975 lbs [4524 kg] (4WD) |
Wheelbase: | 97 inches [246 cm] |
Rear axle: | Flange |
Challenger MT465B Tires | |
Ag front: | 10.00-16 (2WD), 14.9R28 (4WD) |
Ag rear: | 18.4R38 |
info | |
Available packages included the MT465BRU with a 40 GPM PTO hydraulic pump and a 22-foot Little & Company boom mower. The MT465BRM offered a 52 GPM pump and up to 25-foot boom. The MT465BR had no rear hydraulics or hitch to allow an after-market mower installation. |