FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| Series: | → MT297B |
| Production | |
| Distributor: | Challenger (a part of AGCO) |
| Manufacturer: | Iseki |
| Type: | Compact Utility tractor |
| Factory: | Matsuyama, Japan |
| Original price: | $25,000 (2005 ) |
| Variants | |
| Massey Ferguson 1552 |
| Challenger MT295B Power | |
| Engine (gross): | 52.1 hp 38.9 kW |
| Engine (net): | 50 hp 37.3 kW |
| PTO (claimed): | 41 hp 30.6 kW |
| Mechanical | |
| Chassis: | 4x4 MFWD 4WD |
| Final drives: | spur gear |
| Differential lock: | mechanical rear |
| Steering: | power |
| Brakes: | wet disc |
| Cab: | Two-post foldable ROPS. Cab optional with air-conditioning. |
| Transmissions: | 8-speed, 12-speed partially synchronized, 12-speed partial power shift |
| Capacity | |
| Fuel: | 13.2 gal 50.0 L |
| Hydraulic system: | 10 gal 37.9 L |
| Hydraulics | |
| Type: | open center |
| Capacity: | 10 gal 37.9 L |
| Pressure: | 2276 psi 156.9 bar |
| Rear valves: | 2*Optional |
| Mid valves: | 2*Optional |
| Pump flow: | 11.4 gpm 43.1 lpm |
| Total flow: | 16.2 gpm 61.3 lpm (sync shuttle), 17.3 gpm 65.5 lpm (power shuttle/AutoPower) |
| Steering flow: | 4.8 gpm 18.2 lpm (sync shuttle), 5.9 gpm 22.3 lpm (power shuttle/AutoPower) |
| Steering press.: | 2276 psi 156.9 bar |
| Tractor hitch | |
| Rear Type: | I |
| Control: | position and response control, optional top-link draft control |
| Rear lift (at ends): | 3483 lbs 1579 kg |
| Rear lift (at 24"/610mm): | 3086 lbs 1399 kg |
| Rear Arms: | telescopic link ends |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Clutch: | electro-hydraulic wet disc |
| Rear RPM: | 540 |
| Dimensions & Tires | |
| Wheelbase: | 76 inches 193 cm |
| Weight: | 3726 lbs 1690 kg |
| Front tire: | 9.5-16 |
| Rear tire: | 16.9-24 |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 40 |
| Battery CCA: | 710 |
| Battery volts: | 12 |
| info | |
| Series: | → MT297B |
| Engine Detail | |
| Iseki E4DD, diesel, 4-cylinder, liquid-cooled | |
| Displacement: | 180.3 ci 3.0 L |
| Bore/Stroke: | 3.82x3.94 inches 97 x 100 mm |
| Power (gross): | 52.1 hp 38.9 kW |
| Fuel system: | indirect injection |
| Air cleaner: | dual-stage dry |
| Pre-heating: | glow plugs |
| Compression: | 21.5:1 |
| Rated RPM: | 2600 |
| Idle RPM: | 975-2750 |
| Starter volts: | 12 |
| Oil capacity: | 8.5 qts 8.0 L |
| Coolant capacity: | 8 qts 7.6 L |
| info | |
| Series: | → MT297B |
| Transmissions overview | |
| 8-speed, 12-speed partially synchronized, 12-speed partial power shift |
| Transmission | |
| Transmission: | AutoPower IV |
| Type: | partial power shift |
| Gears: | 12 forward and reverse |
| Clutch: | mechanical wet disc |
| Oil capacity: | 40.2 qts 38.0 L |
| Four push-button power shift gears in three non-synchronized ranges. Power shuttle shifting with left-hand console lever. Only available on the MT295B with a cab. | |
| Speeds | |
| With 16.9-24 R1 rear tires., |
| info | |
| Series: | → MT297B |
| Challenger MT295B Tires | |
| Ag front: | 9.5-16 |
| Ag rear: | 16.9-24 |
| Lawn/turf front: | 27x10.50-15 |
| Lawn/turf rear: | 44x18.00-20 |
| Industrial front: | 10-16.5 |
| Industrial rear: | 17.5L-24 |
| Dimensions | |
| Wheelbase: | 76 inches 193 cm |
| Length: | 132.7 inches 337 cm |
| Width: | 65.4 inches 166 cm *Minimum width |
| Height (ROPS): | 89.1 inches 226 cm |
| Ground clearance: | 13.2 inches 33 cm |
| Front axle: | Flange: 55.7 inch length 1414 mm |
| Rear axle: | Flange: 48.8 inch length 1239 mm |
| Challenger MT295B Weight | |
| ROPS Shipping: | 3726 lbs 1690 kg |
| Max capacity: | 8378 lbs 3800 kg |
| Max front axle: | 4630 lbs 2100 kg |
| Max rear axle: | 4630 lbs 2100 kg |
| info | |
| Series: | → MT297B |
| Attachment overview | |
| Front-end loader, Backhoe |
| Challenger ML40B Loader | |
| Height (to pin): | 114.5 inches 290 cm |
| Clearance, dumped bucket: | 84 inches 213 cm |
| Dump reach: | 22 inches 55 cm |
| Dump angle: | 47° |
| Reach at ground: | 75 inches 190 cm |
| Rollback angle: | 30° |
| Breakout force (at pin): | 3252 lbs 1475 kg |
| Lift to full height (at pin): | 2500 lbs 1134 kg |
| Lift to full height (at 500mm): | 1921 lbs 871 kg |
| Lift to 1.5m (at 500mm): | 2249 lbs 1020 kg |
| Bucket width: | 72 inches 182 cm |
| Raise time to height: | 4.5 s |
| Bucket dump time: | 1.1 s |
| Lowering time: | 2.9 s |
| Rollback time: | 3.3 s |
| Challenger MH30B Backhoe | |
| Backhoe type: | Challenger MH30B Backhoe |
| Transport height: | 81.5 inches 207 cm |
| Bucket width: | 10 inches 25 cm, 12 inches 30 cm, 16 inches 40 cm, 24 inches 60 cm, 37 inches 93 cm |
| Digging depth: | 100 inches 254 cm |
| Reach from pivot: | 127 inches 322 cm |
| Bucket Rotation: | 165 |
| Swing Arc: | 180 |
| Bucket force: | 4160 lbs 1886 kg |
| Dipperstick force: | 2600 lbs 1179 kg |