FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 2003 - 2005 MT200 Series, Compact Utility tractor | |
| Next model: | Challenger MT295B |
| Series next: | Challenger MT297 |
| Series back: | Challenger MT285 |
| Production | |
| Distributor: | Challenger (a part of AGCO) |
| Manufacturer: | Iseki |
| Factory: | Matsuyama, Japan |
| Capacity | |
| Fuel: | 12.7 gal [48.1 L] |
| 3-Point Hitch | |
| Rear Type: | I |
| Control: | position and draft control |
| Rear lift (at ends): | 3086 lbs [1399 kg] |
| Rear lift (at 24"/610mm): | 2600 lbs [1179 kg] |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Clutch: | wet disc |
| Rear RPM: | 540 (1.375) |
| Mid PTO: | independent*Optional, available only with hydrostatic transmission. |
| Mid RPM: | 2000 |
| Dimensions & Tires | |
| Wheelbase: | 76 inches [193 cm] |
| Weight: | 4277 to 4331 pounds |
| Front tire: | 9.5-16 |
| Rear tire: | 13.6-28 |
| Challenger MT295 Power | |
| Engine (gross): | 44.2 hp [33.0 kW] |
| Gear PTO (claimed): | 37.0 hp [27.6 kW] |
| Hydro PTO (claimed): | 36 hp [26.8 kW] |
| Mechanical | |
| Chassis: | 4x4 MFWD 4WD |
| Differential lock: | mechanical rear |
| Steering: | power |
| Brakes: | wet disc |
| Cab: | Two-post folding ROPS. |
| Hydraulics | |
| Type: | open center |
| Pressure: | 2275 psi [156.9 bar] |
| Pump flow: | 7.4 gpm [28.0 lpm] |
| Total flow: | 12.6 gpm [47.7 lpm] |
| Steering flow: | 5.2 gpm [19.7 lpm] |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Battery | |
| Number: | 1 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 3.43x3.64 inches [87 x 92 mm] |
| Power (gross): | 44.2 hp [33.0 kW] |
| Rated RPM: | 2500 |
| Starter: | electric |
| Starter volts: | 12 |
| Engine Detail | |
| Iseki, diesel, 4-cylinder, liquid-cooled, 134.1 ci [2.2 L] |
| info | |
| Next model: | Challenger MT295B |
| Series next: | Challenger MT297 |
| Series back: | Challenger MT285 |
| Transmission | |
| Type: | power shuttle |
| Gears: | 16 forward and reverse |
| Four synchronized gears (1-4) in four ranges with power shuttle. | |
| info | |
| Next model: | Challenger MT295B |
| Series next: | Challenger MT297 |
| Series back: | Challenger MT285 |
| Dimensions | |
| Gear Weight: | 4277 lbs [1940 kg] |
| Hydro Weight: | 4331 lbs [1964 kg] |
| Wheelbase: | 76 inches [193 cm] |
| Length: | 140.9 inches [357 cm] |
| Width: | 71.5 inches [181 cm] |
| Height (ROPS): | 95.9 inches [243 cm], 72.7 inches [184 cm] *ROPS folded. |
| Front tread: | 52.5 inches [133 cm] |
| Rear tread: | 52 to 60 inches [132 to 152 cm] |
| Challenger MT295 Tires | |
| Standard tires (ag): | Front: 9.5-16. Rear: 13.6-28 |
| Lawn/turf front: | 27x12LL-15 |
| Lawn/turf rear: | 570-648 |
| Industrial front: | 10-16.5 |
| Industrial rear: | 17.5-24 |
| info | |
| Next model: | Challenger MT295B |
| Series next: | Challenger MT297 |
| Series back: | Challenger MT285 |
| Loader | |
| Loader type: | Challenger ML40 |
| Height (to pin): | 99.75 inches [253 cm] |
| Clearance, dumped bucket: | 80.5 inches [204 cm] |
| Dump reach: | 37 inches [93 cm] |
| Dump angle: | 43 |
| Rollback angle: | 15 |
| Lift to full height (at 500mm): | 1600 lbs [725 kg] |
| Backhoe | |
| Backhoe type: | Challenger MH20 |
| Transport height: | 72.8 inches [184 cm] |
| Bucket width: | 10 inches [25 cm], 12 inches [30 cm], 16 inches [40 cm], 24 inches [60 cm], 37 inches [93 cm] |
| 2-Foot flat digging depth: | 96 inches [243 cm] |
| Reach from pivot: | 112.2 inches [284 cm] |
| Bucket Rotation: | 165 |
| Swing Arc: | 180 |