FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 2003 - 2005 MT200 Series, Compact Utility tractor | |
| Next model: | Challenger MT275B |
| Series next: | Challenger MT285 |
| Series back: | Challenger MT265 |
| Production | |
| Distributor: | Challenger (a part of AGCO) |
| Manufacturer: | Iseki |
| Factory: | Matsuyama, Japan |
| 3-Point Hitch | |
| Rear Type: | I |
| Control: | position control, draft control*Optional |
| Rear lift (at ends): | 2,755 lbs [1249 kg] |
| Rear lift (at 24"/610mm): | 2,100 lbs [952 kg] |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Clutch: | wet disc |
| Rear RPM: | 540 (1.375) |
| Mid PTO: | independent*Optional |
| Mid RPM: | 2000 |
| Dimensions & Tires | |
| Wheelbase: | 68.5 inches [173 cm] |
| Weight: | 3,107 lbs [1409 kg] |
| Front tire: | 8-16 |
| Rear tire: | 13.6-24 |
| Challenger MT275 Power | |
| Engine (gross): | 40.1 hp [29.9 kW] |
| PTO (claimed): | 32.4 hp [24.2 kW] |
| Mechanical | |
| Chassis: | 4x4 MFWD 4WD |
| Differential lock: | mechanical rear |
| Steering: | power |
| Brakes: | wet disc |
| Cab: | Two-post ROPS |
| Hydraulics | |
| Type: | open center |
| Pressure: | 2130 psi [146.9 bar] |
| Pump flow: | 7.7 gpm [29.1 lpm] |
| Total flow: | 12.2 gpm [46.2 lpm] |
| Steering flow: | 4.5 gpm [17.0 lpm] |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Battery | |
| Number: | 1 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 3.43x3.30 inches [87 x 84 mm] |
| Power (gross): | 40.1 hp [29.9 kW] |
| Rated RPM: | 2600 |
| Starter: | electric |
| Starter volts: | 12 |
| Engine Detail | |
| Iseki, turbocharged diesel, 3-cylinder, liquid-cooled, 91.4 ci [1.5 L] |
| info | |
| Next model: | Challenger MT275B |
| Series next: | Challenger MT285 |
| Series back: | Challenger MT265 |
| Transmission | |
| Type: | mechanical shuttle |
| Gears: | 8 forward and reverse |
| Clutch: | dry disc |
| info | |
| Next model: | Challenger MT275B |
| Series next: | Challenger MT285 |
| Series back: | Challenger MT265 |
| Dimensions | |
| Weight: | 3,107 lbs [1409 kg] |
| Wheelbase: | 68.5 inches [173 cm] |
| Length: | 118.5 inches [300 cm] |
| Width: | 60.6 inches [153 cm] |
| Height (ROPS): | 93.2 inches [236 cm], 70.8 inches [179 cm] *Folded |
| Front tread: | 44 inches [111 cm] |
| Rear tread: | 45 to 56.8 inches [114 to 144 cm] |
| Challenger MT275 Tires | |
| Standard tires (ag): | Front: 8-16. Rear: 13.6-24 |
| Lawn/turf front: | 305R343 |
| Lawn/turf rear: | 610R470 |
| Industrial front: | 10-16.5 |
| Industrial rear: | 14.9-24 |
| info | |
| Next model: | Challenger MT275B |
| Series next: | Challenger MT285 |
| Series back: | Challenger MT265 |
| Mower deck | |
| Type: | Challenger MG716 |
| Blade | |
| Type: | front-mount Challenger MDZ66 |
| Width: | 66 inches [167 cm] |
| 63" Snow blower | |
| Type: | front-mount Challenger MSB63 |
| Clearing width: | 63 inches [160 cm] |
| Loader | |
| Loader type: | Challenger ML30 |
| Height (to pin): | 98 inches [248 cm] |
| Clearance, dumped bucket: | 80 inches [203 cm] |
| Dump reach: | 22.5 inches [57 cm] |
| Dump angle: | 30 |
| Rollback angle: | 16 |
| Lift to full height (at 500mm): | 1050 lbs [476 kg] |
| Backhoe | |
| Backhoe type: | Challenger MH20 |
| Transport height: | 72.8 inches [184 cm] |
| Bucket width: | 10 inches [25 cm], 12 inches [30 cm], 16 inches [40 cm], 24 inches [60 cm], 37 inches [93 cm] |
| 2-Foot flat digging depth: | 96 inches [243 cm] |
| Reach from pivot: | 112.2 inches [284 cm] |
| Bucket Rotation: | 165 |
| Swing Arc: | 180 |