FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| Series: | → MT275B |
| Production | |
| Distributor: | Challenger (a part of AGCO) |
| Manufacturer: | Iseki |
| Type: | Compact Utility tractor |
| Factory: | Matsuyama, Japan |
| Variants | |
| Massey Ferguson 1533 |
| Challenger MT265B Power | |
| Engine (gross): | 33.0 hp 24.6 kW |
| Engine (net): | 32 hp 23.9 kW |
| Gear PTO (claimed): | 26.0 hp 19.4 kW |
| Hydro PTO (claimed): | 24.5 hp 18.3 kW |
| Challenger MT265B Engine | |
| Fuel tank: | 10.6 gal 40.1 L |
| Mechanical | |
| Chassis: | 4x4 MFWD 4WD |
| Final drives: | spur gear |
| Differential lock: | mechanical rear |
| Steering: | power |
| Brakes: | wet disc |
| Cab: | Two-post foldable ROPS |
| Transmissions: | hydrostatic, 8-speed, 12-speed partially synchronized with power shuttle |
| Hydraulics | |
| Type: | open center |
| Pressure: | 2276 psi 156.9 bar |
| Rear valves: | 2*Optional |
| Mid valves: | 2*Optional |
| Pump flow: | 8.3 gpm 31.4 lpm |
| Total flow: | 12.7 gpm 48.1 lpm (sync shuttle), 13.7 gpm 51.9 lpm (power shuttle/hydro) |
| Steering flow: | 4.4 gpm 16.7 lpm (sync shuttle), 5.4 gpm 20.4 lpm (power shuttle/hydro) |
| Steering press.: | 2276 psi 156.9 bar |
| Tractor hitch | |
| Rear Type: | I |
| Control: | position and response control, optional top-link draft control |
| Rear lift (at ends): | 2800 lbs 1270 kg |
| Rear lift (at 24"/610mm): | 2535 lbs 1149 kg |
| Rear Arms: | fixed link ends ((sync shuttle), telescopic link ends (power shuttle/hydro) |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Clutch: | electro-hydraulic wet disc |
| Rear RPM: | 540 (1.375) |
| Mid PTO: | independent*Optional |
| Mid RPM: | 2000 (1.00) |
| Dimensions & Tires | |
| Wheelbase: | 69.7 inches 177 cm |
| Weight: | 3136 lbs 1422 kg |
| Front tire: | 8-16 |
| Rear tire: | 12.4-24 |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 40 |
| Battery CCA: | 630 |
| Battery volts: | 12 |
| info | |
| Series: | → MT275B |
| Engine Detail | |
| Iseki E3CD-VB40, diesel, 3-cylinder, liquid-cooled | |
| Displacement: | 91.4 ci 1.5 L |
| Bore/Stroke: | 3.43x3.30 inches 87 x 84 mm |
| Power (gross): | 33.0 hp 24.6 kW |
| Fuel system: | indirect injection |
| Air cleaner: | dual-stage dry |
| Pre-heating: | glow plugs |
| Compression: | 21.7:1 |
| Rated RPM: | 2600 |
| Idle RPM: | 980-2860 |
| Starter volts: | 12 |
| Oil capacity: | 5 qts 4.7 L |
| Coolant capacity: | 7.1 qts 6.7 L |
| info | |
| Series: | → MT275B |
| Transmissions overview | |
| hydrostatic, 8-speed, 12-speed partially synchronized with power shuttle |
| Transmission | |
| Transmission: | PowerShuttle |
| Type: | partially synchronized with power shuttle |
| Gears: | 12 forward and reverse |
| Clutch: | dry main, wet shuttle |
| Oil capacity: | 32.8 qts 31.0 L |
| Three ranges with four gears each. Transmission can be shifted from forward to reverse on the go, without the clutch. In-range gear changes can be made on the go with the clutch. | |
| Speeds | |
| With 12.4-24 R1 rear tires., |
| info | |
| Series: | → MT275B |
| Challenger MT265B Tires | |
| Ag front: | 8-16 |
| Ag rear: | 12.4-24, 13.6-24 |
| Lawn/turf front: | 27x8.50-15 |
| Lawn/turf rear: | 41x14.00-20 |
| Industrial front: | 10-16.5 |
| Industrial rear: | 14.9-24 |
| Dimensions | |
| Wheelbase: | 69.7 inches 177 cm |
| Length: | 121 inches 307 cm |
| Width: | 62.2 inches 157 cm *Minimum width |
| Height (ROPS): | 87.4 inches 221 cm |
| Ground clearance: | 14.1 inches 35 cm |
| Front tread: | 45 inches 114 cm |
| Rear tread: | 46.5 to 58.9 inches 118 to 149 cm |
| Challenger MT265B Weight | |
| 3136 lbs 1422 kg | |
| Max capacity: | 6614 lbs 3000 kg |
| Max front axle: | 3968 lbs 1799 kg |
| Max rear axle: | 6968 lbs 3160 kg |
| info | |
| Series: | → MT275B |
| Attachment overview | |
| Front-end loader, Backhoe |
| Challenger ML30B Loader | |
| Height (to pin): | 102 inches 259 cm |
| Clearance, dumped bucket: | 80 inches 203 cm |
| Dump reach: | 15 inches 38 cm |
| Dump angle: | 47° |
| Reach at ground: | 58 inches 147 cm |
| Rollback angle: | 30° |
| Breakout force (at pin): | 2720 lbs 1233 kg |
| Lift to full height (at pin): | 1632 lbs 740 kg |
| Lift to full height (at 500mm): | 1112 lbs 504 kg |
| Lift to 1.5m (at 500mm): | 1485 lbs 673 kg |
| Bucket width: | 66 inches 167 cm |
| Raise time to height: | 3.5 s |
| Bucket dump time: | 3.1 s |
| Lowering time: | 2.1 s |
| Rollback time: | 1.9 s |
| Challenger MH20B Backhoe | |
| Backhoe type: | Challenger MH20B Backhoe |
| Transport height: | 75 inches 190 cm |
| Bucket width: | 10 inches 25 cm, 12 inches 30 cm, 16 inches 40 cm, 24 inches 60 cm, 37 inches 93 cm |
| Digging depth: | 90 inches 228 cm |
| Reach from pivot: | 112 inches 284 cm |
| Bucket Rotation: | 165 |
| Swing Arc: | 180 |
| Bucket force: | 3250 lbs 1474 kg |
| Dipperstick force: | 1900 lbs 861 kg |