FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
Series: | → MT265B |
Production | |
Distributor: | Challenger (a part of AGCO) |
Manufacturer: | Iseki |
Type: | Compact Utility tractor |
Factory: | Matsuyama, Japan |
Variants | |
Massey Ferguson 1528 |
Challenger MT255B Power | |
Engine (gross): | 28.4 hp 21.2 kW |
Engine (net): | 28 hp 20.9 kW |
Gear PTO (claimed): | 24.2 hp 18.0 kW |
Hydro PTO (claimed): | 22.3 hp 16.6 kW |
Mechanical | |
Chassis: | 4x4 MFWD 4WD |
Final drives: | spur gear |
Differential lock: | mechanical rear |
Steering: | power |
Brakes: | wet disc |
Cab: | Two-post foldable ROPS |
Transmissions: | hydrostatic, 9-speed gear |
Capacity | |
Fuel: | 7.9 gal 29.9 L |
Gear Hydraulic system: | 4.8 gal 18.2 L |
Hydro Hydraulic system: | 7.7 gal 29.1 L |
Hydraulics | |
Type: | open center |
Gear Capacity: | 4.8 gal 18.2 L |
Hydro Capacity: | 7.7 gal 29.1 L |
Pressure: | 2134 psi 147.1 bar |
Rear valves: | 2*Optional |
Mid valves: | 2*Optional |
Pump flow: | 7.4 gpm 28.0 lpm |
Total flow: | 10.0 gpm 37.9 lpm |
Steering flow: | 2.6 gpm 9.8 lpm |
Steering press.: | 1711 psi 118.0 bar |
Tractor hitch | |
Rear Type: | I |
Control: | position and response control, top-link draft control*Optional, with hydrostatic transmission. |
Rear lift (at ends): | 2425 lbs 1099 kg |
Rear lift (at 24"/610mm): | 1610 lbs 730 kg |
Rear Arms: | fixed link ends |
Power Take-off (PTO) | |
Gear Rear PTO: | live |
Hydro Rear PTO: | independent |
Gear Clutch: | dry disc |
Hydro Clutch: | electro-hydraulic wet disc |
Rear RPM: | 540 (1.375) |
Gear Mid PTO: | live |
Hydro Mid PTO: | independent |
Mid RPM: | 2000 (1.00) |
Dimensions & Tires | |
Wheelbase: | 65.5 inches 166 cm |
Weight: | 2370 to 2423 pounds |
Front tire: | 7-14 |
Rear tire: | 9.5-24 |
Electrical | |
Ground: | negative |
Charging system: | alternator |
Charging amps: | 40 |
Battery CCA: | 582 |
Battery volts: | 12 |
info | |
Series: | → MT265B |
Engine Detail | |
Iseki E3CF, diesel, 3-cylinder, liquid-cooled | |
Displacement: | 89.3 ci 1.5 L |
Bore/Stroke: | 3.39x3.30 inches 86 x 84 mm |
Power (gross): | 28.4 hp 21.2 kW |
Fuel system: | indirect injection |
Air cleaner: | dual-stage dry |
Pre-heating: | glow plugs |
Rated RPM: | 2500 |
Idle RPM: | 930-2750 |
Starter volts: | 12 |
Oil capacity: | 3.8 qts 3.6 L |
Coolant capacity: | 5.8 qts 5.5 L |
info | |
Series: | → MT265B |
Transmissions overview | |
hydrostatic, 9-speed gear |
Transmission | |
Type: | gear |
Gears: | 9 forward and 3 reverse |
Clutch: | dry dual stage |
Oil capacity: | 19 qts 18.0 L |
Three non-synchronized gears (1-3), plus reverse (R) in three non-synchronized ranges. |
Speeds | |
With 12.5/80-18 rear tires., |
info | |
Series: | → MT265B |
Challenger MT255B Tires | |
Ag front: | 7-14 |
Ag rear: | 9.5-24 |
Lawn/turf front: | 24x8.50-14 |
Lawn/turf rear: | 36x13.50-15 |
Industrial front: | 25x8.50-14 |
Industrial rear: | 12.50/80-18 |
Dimensions | |
Wheelbase: | 65.5 inches 166 cm |
Length: | 112.4 inches 285 cm |
Width: | 50.6 inches 128 cm *Minimum width. |
Height (ROPS): | 80.7 inches 204 cm |
Ground clearance: | 10 inches 25 cm |
Front axle: | Flange: 39.34 inch length 999 mm |
Rear axle: | Flange: 37.4 inch length 949 mm |
Front tread: | 39.6 inches 100 cm |
Rear tread: | 37.6 inches 95 cm |
Challenger MT255B Weight | |
Gear Shipping: | 2370 lbs 1075 kg |
Hydro Shipping: | 2423 lbs 1099 kg |
Max capacity: | 4145 lbs 1880 kg |
Max front axle: | 1929 lbs 874 kg |
Max rear axle: | 2216 lbs 1005 kg |
info | |
Series: | → MT265B |
Attachment overview | |
Front-end loader, Backhoe |
Challenger ML20B Loader | |
Height (to pin): | 90 inches 228 cm |
Clearance, dumped bucket: | 71 inches 180 cm |
Dump reach: | 16 inches 40 cm |
Dump angle: | 44° |
Reach at ground: | 52 inches 132 cm |
Rollback angle: | 17° |
Breakout force (at pin): | 2387 lbs 1082 kg |
Lift to full height (at pin): | 1188 lbs 538 kg |
Lift to full height (at 500mm): | 813 lbs 368 kg |
Lift to 1.5m (at 500mm): | 1139 lbs 516 kg |
Bucket width: | 51 inches 129 cm |
Raise time to height: | 5.5 s |
Bucket dump time: | 2.2 s |
Lowering time: | 3.2 s |
Rollback time: | 3 s |
Challenger MH10B Backhoe | |
Backhoe type: | Challenger MH10B Backhoe |
Transport height: | 63.8 inches 162 cm |
Bucket width: | 10 inches 25 cm, 12 inches 30 cm, 16 inches 40 cm |
Digging depth: | 78 inches 198 cm |
Reach from pivot: | 102 inches 259 cm |
Bucket Rotation: | 165 |
Swing Arc: | 180 |
Bucket force: | 2400 lbs 1088 kg |
Dipperstick force: | 1450 lbs 657 kg |