FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 2003 - 2005 MT200 Series, Compact Utility tractor | |
| Next model: | Challenger MT255B |
| Series next: | Challenger MT265 |
| Series back: | Challenger MT225 |
| Production | |
| Distributor: | Challenger (a part of AGCO) |
| Manufacturer: | Iseki |
| Factory: | Matsuyama, Japan |
| Capacity | |
| Fuel: | 6 gal [22.7 L] |
| 3-Point Hitch | |
| Rear Type: | I |
| Control: | position control, draft control*Optional |
| Rear lift (at ends): | 1,984 lbs [899 kg] |
| Rear lift (at 24"/610mm): | 1,323 lbs [600 kg] |
| Power Take-off (PTO) | |
| Rear PTO: | live |
| Clutch: | dry disc |
| Rear RPM: | 540 (1.375) |
| Mid PTO: | optional |
| Mid RPM: | 2000 |
| Dimensions & Tires | |
| Wheelbase: | 64.5 inches [163 cm] |
| Weight: | 2,248 lbs [1019 kg] |
| Front tire: | 6-14 |
| Rear tire: | 12.4-16 |
| Challenger MT255 Power | |
| Engine (gross): | 28.4 hp [21.2 kW] |
| PTO (claimed): | 28.4 hp [21.2 kW] |
| Mechanical | |
| Chassis: | 4x4 MFWD 4WD |
| Differential lock: | mechanical rear |
| Steering: | power |
| Cab: | Two-post fixed ROPS. |
| Hydraulics | |
| Type: | open center |
| Pressure: | 2130 psi [146.9 bar] |
| Pump flow: | 7.4 gpm [28.0 lpm] |
| Total flow: | 9.9 gpm [37.5 lpm] |
| Steering flow: | 2.5 gpm [9.5 lpm] |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Battery | |
| Number: | 1 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 3.39x3.30 inches [86 x 84 mm] |
| Power (gross): | 28.4 hp [21.2 kW] |
| Rated RPM: | 2500 |
| Starter: | electric |
| Starter volts: | 12 |
| Engine Detail | |
| Iseki, diesel, 3-cylinder, liquid-cooled, 89.3 ci [1.5 L] |
| info | |
| Next model: | Challenger MT255B |
| Series next: | Challenger MT265 |
| Series back: | Challenger MT225 |
| Transmission | |
| Type: | constant mesh |
| Gears: | 9 forward and 3 reverse |
| info | |
| Next model: | Challenger MT255B |
| Series next: | Challenger MT265 |
| Series back: | Challenger MT225 |
| Dimensions | |
| Weight: | 2,248 lbs [1019 kg] |
| Wheelbase: | 64.5 inches [163 cm] |
| Length: | 116.5 inches [295 cm] |
| Width: | 51 inches [129 cm] |
| Height (ROPS): | 79.3 inches [201 cm] |
| Front tread: | 42 inches [106 cm] |
| Rear tread: | 37.2 to 37.25 inches [94 to 94 cm] |
| Challenger MT255 Tires | |
| Standard tires (ag): | Front: 6-14. Rear: 12.4-16 |
| Lawn/turf front: | 24x8.50-12 |
| Lawn/turf rear: | 315/80D-16 |
| Industrial front: | 25x8.50-14 |
| Industrial rear: | 12.5/80-18 |
| info | |
| Next model: | Challenger MT255B |
| Series next: | Challenger MT265 |
| Series back: | Challenger MT225 |
| Mower deck | |
| Type: | Challenger MG716 |
| Blade | |
| Type: | front-mount Challenger MDZ66 |
| Width: | 66 inches [167 cm] |
| 63" Snow blower | |
| Type: | front-mount Challenger MSB63 |
| Clearing width: | 63 inches [160 cm] |
| Loader | |
| Loader type: | Challenger ML20 |
| Height (to pin): | 90 inches [228 cm] |
| Clearance, dumped bucket: | 71 inches [180 cm] |
| Dump reach: | 16 inches [40 cm] |
| Dump angle: | 44 |
| Rollback angle: | 17 |
| Lift to full height (at 500mm): | 785 lbs [356 kg] |