FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
2003 - 2005 MT200 Series, Compact Utility tractor | |
Next model: | Challenger MT225B |
Series next: | Challenger MT255 |
Production | |
Distributor: | Challenger (a part of AGCO) |
Manufacturer: | Iseki |
Factory: | Matsuyama, Japan |
3-Point Hitch | |
Rear Type: | I |
Control: | position control |
Rear lift (at ends): | 1,210 lbs [548 kg] |
Rear lift (at 24"/610mm): | 694 lbs [314 kg] |
Power Take-off (PTO) | |
Rear PTO: | independent |
Rear RPM: | 540 (1.375) |
Mid PTO: | independent |
Mid RPM: | 2000 |
Dimensions & Tires | |
Wheelbase: | 59.5 inches [151 cm] |
Weight: | 1,672 lbs [758 kg] |
Front tire: | 5.00-12 |
Rear tire: | 9.5-16 |
Challenger MT225 Power | |
Engine (gross): | 23.3 hp [17.4 kW] |
PTO (claimed): | 19 hp [14.2 kW] |
Mechanical | |
Chassis: | 4x4 MFWD 4WD |
Differential lock: | mechanical rear |
Steering: | power |
Brakes: | dry shoe |
Cab: | Two-post fixed ROPS. |
Hydraulics | |
Type: | open center |
Pressure: | 1930 psi [133.1 bar] |
Pump flow: | 5.4 gpm [20.4 lpm] |
Total flow: | 7.9 gpm [29.9 lpm] |
Steering flow: | 2.5 gpm [9.5 lpm] |
Electrical | |
Ground: | negative |
Charging system: | alternator |
Battery | |
Number: | 1 |
Volts: | 12 |
info | |
Bore/Stroke: | 3.08x3.07 inches [78 x 78 mm] |
Power (gross): | 23.3 hp [17.4 kW] |
Rated RPM: | 2800 |
Starter: | electric |
Starter volts: | 12 |
Engine Detail | |
Iseki, diesel, 3-cylinder, liquid-cooled, 68.5 ci [1.1 L] |
info | |
Next model: | Challenger MT225B |
Series next: | Challenger MT255 |
Transmission | |
Type: | hydrostatic |
Gears: | infinite (2-range) forward and reverse |
info | |
Next model: | Challenger MT225B |
Series next: | Challenger MT255 |
Dimensions | |
Weight: | 1,672 lbs [758 kg] |
Wheelbase: | 59.5 inches [151 cm] |
Length: | 105.4 inches [267 cm] |
Width: | 41 inches [104 cm] |
Height: | 75.2 inches [191 cm] |
Front tread: | 36.5 inches [92 cm] |
Rear tread: | 35 inches [88 cm] |
Challenger MT225 Tires | |
Standard tires (ag): | Front: 5.00-12. Rear: 9.5-16 |
Lawn/turf front: | 23x10.50-12 |
Lawn/turf rear: | 315/75D-15 |
Industrial front: | 23x8.50-12 |
Industrial rear: | 12-16.5 |
info | |
Next model: | Challenger MT225B |
Series next: | Challenger MT255 |
Mower deck | |
Type: | Challenger MG715 |
Loader | |
Loader type: | Challenger ML10 |
Height (to pin): | 73.5 inches [186 cm] |
Clearance, dumped bucket: | 53 inches [134 cm] |
Dump reach: | 22 inches [55 cm] |
Dump angle: | 51 |
Rollback angle: | 23 |
Lift to full height (at 500mm): | 565 lbs [256 kg] |