FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 2003 - 2003 7000 Series, Compact Utility tractor | |
| Series next: | Cub Cadet 7254 |
| Production | |
| Manufacturer: | Cub Cadet |
| Original price (USD), $10,000 (2003 ), | |
| Variants | |
| 7252: | 2WD |
| 7254: | 4WD |
| Capacity | |
| Fuel: | 6 gal [22.7 L] |
| Hydraulic system: | 6 gal [22.7 L] |
| 3-Point Hitch | |
| Rear Type: | I |
| Control: | position control |
| Rear lift (at ends): | 1150 lbs [521 kg] |
| Rear lift (at 24"/610mm): | 950 lbs [430 kg] |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Clutch: | electric |
| Rear RPM: | 540 (1.375) |
| Engine RPM: | 540@3500 |
| Mid PTO: | independent |
| Mid RPM: | 2000 (1.000) |
| Dimensions & Tires | |
| Wheelbase: | 58 inches [147 cm] |
| Weight: | 1597 lbs [724 kg] |
| 7252 Serial Numbers | |
| - Serial numbers unknown - |
| Cub Cadet 7252 Power | |
| Engine: | 25 hp [18.6 kW] |
| PTO (claimed): | 20 hp [14.9 kW] |
| Mechanical | |
| Chassis: | 4x2 2WD |
| Differential lock: | mechanical rear |
| Steering: | hydrostatic power |
| Brakes: | dry shoe |
| Cab: | Two-post foldable ROPS. |
| Hydraulics | |
| Type: | open center gear pump |
| Capacity: | 6 gal [22.7 L] |
| Pressure: | 1500 psi [103.4 bar] |
| Pump flow: | 5 gpm [18.9 lpm] |
| Total flow: | 8 gpm [30.3 lpm] |
| Steering flow: | 3 gpm [11.4 lpm] |
| Electrical | |
| Ground: | negative |
| Charging system: | flywheel alternator |
| Charging amps: | 30 |
| Battery | |
| Number: | 1 |
| Cold-cranking amps: | 500 |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 3.07x3.07 inches [78 x 78 mm] |
| Power: | 25 hp [18.6 kW] |
| Fuel system: | dual carburetor |
| Air cleaner: | paper element |
| Pre-heating: | coolant heater (optional) |
| Rated RPM: | 3600 |
| Idle RPM: | 1550-3600 |
| Starter: | electric |
| Starter volts: | 12 |
| Oil capacity: | 2.1 qts [2.0 L] |
| Oil change: | 100 h |
| Coolant capacity: | 3.5 qts [3.3 L] |
| Coolant change: | 400 h |
| Sparkplug gap: | 0.030 inches [0.762 mm] |
| Intake valve clearance: | 0.006 inches [0.152 mm] (cold) |
| Exhaust valve clearance: | 0.006 inches [0.152 mm] (cold) |
| Engine Detail | |
| Kawasaki FD750, gasoline, 2-cylinder, liquid-cooled, 45.6 ci [0.7 L] |
| info | |
| Cab Cadet Hy-Trans Fluid |
| Transmission | |
| Type: | hydrostatic |
| Gears: | infinite (2-range) forward and reverse |
| Oil capacity: | 24 qts [22.7 L] |
| Hydrostatic transmission with forward-reverse tredle pedal and high-low range shift. Tractor must be stopped to shift range. | |
| info | |
| Series next: | Cub Cadet 7254 |
| Dimensions | |
| Weight: | 1597 lbs [724 kg] |
| Wheelbase: | 58 inches [147 cm] |
| Length: | 91 inches [231 cm], 109 inches [276 cm] (with hitch) |
| Width: | 48 inches [121 cm] |
| Height: | 53 inches [134 cm] |
| Height (ROPS): | 79 inches [200 cm] |
| Ground clearance: | 8 inches [20 cm] |
| Cub Cadet 7252 Tires | |
| Lawn/turf front: | 20x9-8 |
| Lawn/turf rear: | 27x12-15 |
| info | |
| In addition to the mid-mount mowers, the Cub Cadet 7252 was advertised as compatible with 60-inch rear-mount finish mower and 48-inch rotary cutter. Recommended ground tools included a 48-inch box blade, 60-inch rear blade, and 50-inch tiller. |
| 54" Mower deck | |
| Type: | mid-mount Cub Cadet 590-613-100 |
| Cutting width: | 54 inches [137 cm] |
| 60" Mower deck | |
| Type: | mid-mount Cub Cadet 590-614-100 |
| Cutting width: | 60 inches [152 cm] |
| Blade | |
| Type: | front-mount Cub Cadet 590-615-100 |
| Width: | 60 inches [152 cm] |
| 54" Snow blower | |
| Type: | front-mount Cub Cadet 590-619-100 |
| Clearing width: | 54 inches [137 cm] |
| Loader | |
| Loader type: | Cub Cadet 610 |
| Height (to pin): | 73.5 inches [186 cm] |
| Clearance, dumped bucket: | 53 inches [134 cm] |
| Dump reach: | 24 inches [60 cm] |
| Dump angle: | 45 |
| Reach at ground: | 49 inches [124 cm] |
| Rollback angle: | 25 |
| Breakout force (at pin): | 1647 lbs [747 kg] |
| Lift to full height (at pin): | 725 lbs [328 kg] |
| Bucket width: | 48 inches [121 cm] |
| Backhoe | |
| Backhoe type: | Cub Cadet 612 |
| Weight: | 950 lbs [430 kg] |
| Digging depth: | 78 inches [198 cm] |
| Reach from pivot: | 94 inches [238 cm] |
| Loading height: | 52.5 inches [133 cm] |
| Bucket Rotation: | 180 |
| Swing Arc: | 180 |
| Bucket force: | 1935 lbs [877 kg] |
| Dipperstick force: | 1010 lbs [458 kg] |