Cub Cadet 2150 Specifications - Cub Cadet 2150 Specs

info
Series: → 2155
Production
Manufacturer: Cub Cadet (a part of MTD)
Type: Lawn tractor
Variants
2150: gear
2155: hydrostatic
Cub Cadet 2150 Engine
Fuel tank: 3 gal 11.4 L
Mechanical
Chassis: 4x2 2WD
Steering: manual
Brakes: internal expanding
Cab: Open operator station.
Transmission: 6-speed gear
Power Take-off (PTO)
Front PTO: independent
Clutch: electric
Dimensions & Tires
Wheelbase: 47 inches 119 cm
Weight: 568 lbs 257 kg
Front tire: 15x6-6
Rear tire: 20x9-8
2150 Serial Numbers
Location: Serial number plate on the left side of the 2150 frame, under the running boards.
photo of 2150 serial number
Electrical
Ground: negative
Charging system: flywheel alternator
Charging amps: 15
Battery CCA: 275
Battery volts: 12
info
Series: → 2155
Engine Detail
Kohler Command, gasoline, 1-cylinder, air-cooled
Displacement: 426 cc 26 ci
Power (gross): 15 hp 11.2 kW
Idle RPM: 1400-3600
Starter: electric
Starter volts: 12
Sparkplug: 759-3693
Sparkplug gap: 0.040 inches 1.016 mm
Engine Oil
Oil capacity: 2 qts 1.9 L
Oil change: 100 h
info
Series: → 2155
Transmission
Transmission: Auto Gear System
Type: shaft-driven gear
Gears: 6 forward and reverse
Oil capacity: 7 qts 6.6 L
The Cub Cadet Auto Gear uses a six-speed transmission with forward and reverse foot pedals. The pedals control a clutch and should be fully depressed for whichever gear is selected. Using the pedals as a speed control will result in premature clutch failure.
info
Series: → 2155
Cub Cadet 2150 Tires
Lawn/turf front: 15x6-6
Lawn/turf rear: 20x9-8
Dimensions
Wheelbase: 47 inches 119 cm
Length: 72 inches 182 cm
Width: 51 inches 129 cm
Height (steering wheel): 42 inches 106 cm
Weight: 568 lbs 257 kg *Weight with 42-inch mower deck.
Ground clearance: 6 inches 15 cm
info
Series: → 2155
Attachment overview
42" mid-mount mower deck, Snowblower, Blade, A 28-inch rear tiller, model 190304, with electric lift was available. A 6.5 bushel twin-bag rear grass catcher (model 190305) was optional.
42" Mower deck
Type: mid-mount Cub Cadet, 2-blade with manual lift
Cutting width: 42 inches 106 cm
Belt: 954-3055A (PTO), 954-3073 (deck)
Cut height: 1.5 to 4.25 inch 3 to 10 cm
Blade
Type: front-mount Cub Cadet 190302
Width: 42 inches 106 cm
40" Snow blower
Type: front-mount Cub Cadet 190303, two-stage
Clearing width: 40 inches 101 cm