Cub Cadet 2140 Specifications - Cub Cadet 2140 Specs

info
Series: → 2145
Production
Manufacturer: Cub Cadet (a part of MTD)
Type: Lawn tractor
Variants
2140: gear
2165: hydrostatic
Cub Cadet 2140 Engine
Fuel tank: 3 gal 11.4 L
Mechanical
Chassis: 4x2 2WD
Steering: manual
Cab: Open operator station.
Transmission: 6-speed gear
Power Take-off (PTO)
Front PTO: independent
Clutch: electric
Dimensions & Tires
Wheelbase: 47 inches 119 cm
Front tire: 15x6-6
Rear tire: 20x9-8
2140 Serial Numbers
Location: Serial number plate on the left side of frame above front axle.
photo of 2140 serial number
Electrical
Ground: negative
Charging amps: 15
Battery volts: 12
info
Series: → 2145
Engine Detail
Onan, gasoline, 1-cylinder, air-cooled
Displacement: 388 cc 23.7 ci
Bore/Stroke: 3.31x2.76 inches 84 x 70 mm
Power (gross): 14 hp 10.4 kW
Rated RPM: 3600
Starter: electric
Starter volts: 12
Sparkplug gap: 0.035 inches 0.889 mm
Engine Oil
Oil capacity: 1 qts 0.9 L
Oil change: 100 h
info
Series: → 2145
Transmission
Transmission: Auto Gear System
Type: shaft-driven gear
Gears: 6 forward and reverse
Oil capacity: 6 qts 5.7 L
The Cub Cadet Auto Gear uses a six-speed transmission with forward and reverse foot pedals. The pedals control a clutch and should be fully depressed for whichever gear is selected. Using the pedals as a speed control will result in premature clutch failure.
info
Series: → 2145
Cub Cadet 2140 Tires
Lawn/turf front: 15x6-6
Lawn/turf rear: 20x9-8
Dimensions
Wheelbase: 47 inches 119 cm
Length: 72 inches 182 cm
Width: 51 inches 129 cm
Height (steering wheel): 42 inches 106 cm
Ground clearance: 6 inches 15 cm
Front tread: 30 inches 76 cm
Rear tread: 27.5 inches 69 cm
info
Series: → 2145
Attachment overview
42" mid-mount mower deck, Snowblower, Blade
42" Mower deck
Type: mid-mount Cub Cadet, 2-blade with manual lift
Cutting width: 42 inches 106 cm
Blade
Type: front-mount Cub Cadet 190302
Width: 42 inches 106 cm
40" Snow blower
Type: front-mount Cub Cadet 190303, two-stage
Clearing width: 40 inches 101 cm