Cub Cadet 2135 Specifications - Cub Cadet 2135 Specs

info
Series: → 2140
Production
Manufacturer: Cub Cadet (a part of MTD)
Type: Lawn tractor
The 1998 and 1999 the HDS2135 was advertised as having 13 horsepower, although the CH13 engine was similar to the earlier CH12.5.
Variants
2130: gear
2135: hydrostatic
Cub Cadet 2135 Engine
Fuel tank: 3 gal 11.4 L
Mechanical
Chassis: 4x2 2WD
Steering: manual
Brakes: internal expanding
Cab: Open operator station.
Transmission: hydrostatic
Power Take-off (PTO)
Front PTO: independent
Clutch: electric
Dimensions & Tires
Wheelbase: 47 inches 119 cm
Weight: 563 lbs 255 kg
Front tire: 15x6-6
Rear tire: 20x9-8
2135 Serial Numbers
Location: Serial number plate on the left side of frame above front axle.
photo of 2135 serial number
Electrical
Ground: negative
Charging system: flywheel alternator
Charging amps: 15
Battery CCA: 275
Battery volts: 12
info
Series: → 2140
Engine Detail
Kohler CH12.5, gasoline, 1-cylinder, air-cooled horizontal-shaft
Displacement: 398 cc 24.29 ci
Bore/Stroke: 3.4375x2.625 inches 87 x 67 mm
Power (gross): 12.5 hp 9.3 kW
Idle RPM: 1400-3600
Starter: electric
Starter volts: 12
Sparkplug: 759-3336
Sparkplug gap: 0.040 inches 1.016 mm
Engine Oil
Oil capacity: 2 qts 1.9 L
Oil change: 100 h
info
Series: → 2140
Transmission
Transmission: BDU-10L
Type: shaft-driven hydrostatic
Gears: infinite forward and reverse
Oil capacity: 7.5 qts 7.1 L
info
Series: → 2140
Cub Cadet 2135 Tires
Lawn/turf front: 15x6-6
Lawn/turf rear: 20x9-8
Dimensions
Wheelbase: 47 inches 119 cm
Length: 72 inches 182 cm
Width: 45 inches 114 cm
Height (steering wheel): 42 inches 106 cm
Weight: 563 lbs 255 kg *Weight with 38-inch mower deck.
Ground clearance: 6 inches 15 cm
Front tread: 30 inches 76 cm
Rear tread: 27.5 inches 69 cm
info
Series: → 2140
Attachment overview
38" mid-mount mower deck, Snowblower, Blade, A 28-inch rear tiller, model 190304, with electric lift was available. A 6.5 bushel twin-bag rear grass catcher (model 190305) was optional.
38" Mower deck
Type: mid-mount Cub Cadet, 2-blade with manual lift
Cutting width: 38 inches 96 cm
Cut height: 1.5 to 4.25 inch 3 to 10 cm
Blade
Type: front-mount Cub Cadet 190302
Width: 42 inches 106 cm
40" Snow blower
Type: front-mount Cub Cadet 190303, two-stage
Clearing width: 40 inches 101 cm