Cub Cadet 1100 Specifications - Cub Cadet 1100 Specs

info
Series: → 1200
Production
Manufacturer: Cub Cadet (a part of International Harvester)
Type: Garden tractor
Factory: Louisville, Kentucky, USA
The Cub Cadet 1100 was an economy model of the "Quietline" era. It was the only model to use a Briggs engine and used a Peerless transaxle instead of the heavier IH Cub Cadet rear end.
Mechanical
Chassis: 4x2 2WD
Steering: manual
Brakes: dry disc
Cab: Open operator station.
Transmission: 4-speed
Capacity
Fuel: 2 gal 7.6 L
Tractor hitch
Type: sleeve hitch
Power Take-off (PTO)
Front PTO: independent
Clutch: electric
Front RPM: 3400
Dimensions & Tires
Wheelbase: 44 inches 111 cm
Weight: 569 lbs 258 kg
Front tire: 16x6.50-8
Rear tire: 23x8.50-12
Electrical
Ground: negative
Charging system: flywheel alternator
Charging amps: 15
Battery
Number: 1
Volts: 12
info
Series: → 1200
Engine Detail
Briggs & Stratton 253417, gasoline, 1-cylinder, air-cooled horizontal-shaft
Displacement: 399 cc 24.36 ci
Bore/Stroke: 3.4375x2.625 inches 87 x 67 mm
Power (gross): 11 hp 8.2 kW
Air cleaner: dry
Rated RPM: 3400
Torque: 16.8 lb-ft 22.8 Nm
Torque RPM: 1575
Starter volts: 12
info
Series: → 1200
Transmission
Transmission: Peerless gear
Gears: 4 forward and 1 reverse
info
Series: → 1200
Cub Cadet 1100 Tires
Lawn/turf front: 16x6.50-8
Lawn/turf rear: 23x8.50-12
Dimensions
Wheelbase: 44 inches 111 cm
Length: 69 inches 175 cm
Width: 37.5 inches 95 cm
Height (steering wheel): 42.5 inches 107 cm
Operating: 569 lbs 258 kg
Ground clearance: 7.5 inches 19 cm
Front tread: 29 inches 73 cm
Rear tread: 29 inches 73 cm
info
Series: → 1200
Attachment overview
38" mid-mount mower deck, 44" mid-mount mower deck, 50" mid-mount mower deck, Garden tractors are capable of using tillers, plows, or other ground-engaging attachments. TractorData does not list details of these attachments.
38" Mower deck
Type: mid-mount Cub Cadet 38A, 3-blade, lift is manual or electric (optional)
Cutting width: 38 inches 96 cm
Belt: IH 140024-C1 (primary), 954-3002 (secondary)
Cut height: 1.5 to 4.5 inch 3 to 11 cm
44" Mower deck
Type: mid-mount Cub Cadet 44A, 3-blade, lift is manual or electric (optional)
Cutting width: 44 inches 111 cm
Belt: IH 117465-C1 (primary early), IH 490489-R2 (primary SN81742+), 954-3004 (secondary)
Cut height: 1 to 4 inch 2 to 10 cm
50" Mower deck
Type: mid-mount Cub Cadet 50A, 3-blade, lift is manual or electric (optional)
Cutting width: 50 inches 127 cm
Belt: IH 490489-R2 (primary), 954-3005 (secondary)
Cut height: 1 to 4 inch 2 to 10 cm