FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
Note: the Deutz-Allis model 8050 is the same as the Allis Chalmers 8050. The following data is from the 8050 listing. |
Production | |
Manufacturer: | Deutz-Allis |
Factory: | West Allis, Wisconsin, USA |
Total built: | 2,336 |
Original price (USD): | $58,411 |
Capacity | |
Fuel: | 60 gal [227.1 L], 25 gal [94.6 L] (optional tank) |
Rear diff.: | 66.8 qts [63.2 L] |
3-Point Hitch | |
Rear Type: | III/II |
Rear lift (at 24"/610mm): | 6680 lbs [3030 kg], 8200 lbs [3719 kg] *Optional |
Power Take-off (PTO) | |
Rear PTO: | independent |
Rear RPM: | 540/1000, 1000*Optional |
Dimensions & Tires | |
2WD Wheelbase: | 106 inches [269 cm] |
4WD Wheelbase: | 96 inches [243 cm] |
Weight: | 15305 to 19380 pounds |
Front tire: | 10.00-16 |
Rear tire: | 18.4-38 |
8050 Serial Numbers | |
Location: | Above PTO shield |
Deutz-Allis 8050 Power | |
Drawbar (tested): | 131.44 hp [98.0 kW] |
PTO (tested): | 152.40 hp [113.6 kW] |
Mechanical | |
Chassis: | 4x2 2WD, 4x4 MFWD 4WD |
Differential lock: | foot-button |
Steering: | hydrostatic power |
Brakes: | differential hydraulic wet discs |
Cab: | Acousta cab standard with heat and air-conditioning. Optional radio and cassette tape player. |
Hydraulics | |
Type: | closed-center load-sensitive |
Valves: | 2 or 3 |
Pump flow: | 22 gpm [83.3 lpm], 13.5 gpm [51.1 lpm] (transmission) |
Total flow: | 45 gpm [170.3 lpm] |
Steering flow: | 9.5 gpm [36.0 lpm] |
Electrical | |
Charging system: | alternator |
Charging amps: | 100 |
Battery | |
Volts: | 12 |
info | |
Bore/Stroke: | 4.25x5.00 inches [108 x 127 mm] |
Air cleaner: | dry |
Compression: | 15.5:1 |
Rated RPM: | 2300 |
Starter volts: | 12 |
Oil capacity: | 19 qts [18.0 L] *With two oil filters, 21 qts [19.9 L] *With three oil filters |
Coolant capacity: | 32 qts [30.3 L] |
Engine Detail | |
Allis Chalmers 670I, turbocharged intercooled diesel, 6-cylinder, liquid-cooled inline, 426 ci [7.0 L] |
info | |
Speeds: | With 18.4x38 rear tires. |
Transmission | |
Transmission: | Allis-Chalmers Power Director |
Type: | partial power shift |
Gears: | 20 forward and 4 reverse |
Oil capacity: | 29.6 qts [28.0 L] |
Five gears (1-5) in two ranges (slow/fast) with a two-speed power shift (low/high) controlled by left-hand lever. |
info | |
Note: the Deutz-Allis model 8050 is the same as the Allis Chalmers 8050. The following data is from the 8050 listing. |
Dimensions | |
2WD Weight: | 15305 lbs [6942 kg] |
4WD Weight: | 16300 lbs [7393 kg] |
Weight (ballasted): | 19380 lbs [8790 kg] |
2WD Wheelbase: | 106 inches [269 cm] |
4WD Wheelbase: | 96 inches [243 cm] |
Length: | 187 inches [474 cm] |
Width: | 95.5 inches [242 cm], 119.5 inches [303 cm] (long axle) |
Height (hood): | 69 inches [175 cm] |
Height (cab): | 115 inches [292 cm] |
Height (exhaust): | 113 inches [287 cm] |
4WD Clearance (front axle): | 17.5 inches [44 cm] |
2WD Clearance (front axle): | 22 inches [55 cm] |
Clearance (rear axle): | 28 inches [71 cm] |
Deutz-Allis 8050 Tires | |
Ag front: | 11.00-16 (2WD), 14L-16 (2WD), 18.4-16 (2WD), 14.9-28 (4WD), 14.9-24 (4WD) |
Ag rear: | 20.8-38, 18.4-42, 16.9-38 |