FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| Note: the Deutz-Allis model 8010 is the same as the Allis Chalmers 8010. The following data is from the 8010 listing. |
| Production | |
| Manufacturer: | Deutz-Allis |
| Factory: | West Allis, Wisconsin, USA |
| Total built: | 1,832 |
| Original price (USD): | $46,176 |
| Capacity | |
| Fuel: | 60 gal [227.1 L], 25 gal [94.6 L] (optional tank) |
| Rear diff.: | 66.8 qts [63.2 L] |
| 3-Point Hitch | |
| Rear Type: | II |
| Rear lift (at 24"/610mm): | 6,680 lbs [3030 kg] |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 540/1000 |
| Dimensions & Tires | |
| Wheelbase: | 106 inches [269 cm] (2WD), 96 inches [243 cm] (4WD) |
| Weight: | 12630 to 13600 pounds |
| Front tire: | 10.00-16 |
| Rear tire: | 18.4-38 |
| 8010 Serial Numbers | |
| Location: | Main frame, left side |
| Deutz-Allis 8010 Power | |
| Drawbar (tested): | 91.46 hp [68.2 kW] |
| PTO (tested): | 107.38 hp [80.1 kW] |
| Mechanical | |
| Chassis: | 4x2 2WD, 4x4 MFWD 4WD (optional) |
| Differential lock: | foot-button |
| Steering: | hydrostatic power |
| Brakes: | differential hydraulic wet discs |
| Cab: | Acousta cab standard with heat and air-conditioning. Optional radio and cassette tape player. |
| Hydraulics | |
| Type: | load-sensitive |
| Valves: | 2 or 3 |
| Pump flow: | 22 gpm [83.3 lpm], 13.5 gpm [51.1 lpm] (transmission) |
| Total flow: | 45 gpm [170.3 lpm] |
| Steering flow: | 9.5 gpm [36.0 lpm] |
| Electrical | |
| Charging system: | alternator |
| Charging amps: | 100 |
| Battery | |
| Volts: | 12 |
| info | |
| Bore/Stroke: | 3.875x4.25 inches [98 x 108 mm] |
| Air cleaner: | dry |
| Compression: | 15.5:1 |
| Rated RPM: | 2300 |
| Firing order: | 1-5-3-6-2-4 |
| Starter volts: | 12 |
| Oil capacity: | 16 qts [15.1 L] |
| Coolant capacity: | 26 qts [24.6 L] |
| Engine Detail | |
| Allis Chalmers 649T, turbocharged diesel, 6-cylinder, liquid-cooled inline, 301 ci [4.9 L] |
| info | |
| Speeds: | With 18.4x38 rear tires. |
| Transmission | |
| Transmission: | Allis-Chalmers Power Director |
| Type: | partial power shift |
| Gears: | 16 forward and 4 reverse |
| Oil capacity: | 29.6 qts [28.0 L] |
| Four gears (1-4) in two ranges (slow/fast) with a two-speed power shift (low/high) controlled by left-hand lever. | |
| info | |
| Note: the Deutz-Allis model 8010 is the same as the Allis Chalmers 8010. The following data is from the 8010 listing. |
| Dimensions | |
| Weight: | 12,630 lbs [5728 kg] (2WD), 13,600 lbs [6168 kg] (4WD) |
| Wheelbase: | 106 inches [269 cm] (2WD), 96 inches [243 cm] (4WD) |
| Length: | 187 inches [474 cm] |
| Width: | 92.6 inches [235 cm] |
| Height (hood): | 69 inches [175 cm] |
| Height (cab): | 114 inches [289 cm] |
| Height (exhaust): | 113 inches [287 cm] |
| Ground clearance: | 17.5 inches [44 cm] (4WD front axle), 21 inches [53 cm] (front axle), 28 inches [71 cm] (rear axle) |
| Deutz-Allis 8010 Tires | |
| Ag front: | 11.00-16 (2WD), 14L-16 (2WD), 18.4-16 (2WD), 14.9-28 (4WD), 14.9-24 (4WD) |
| Ag rear: | 20.8-38, 18.4-42, 16.9-38 |