FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
1984 - 1995 DX 3 Series, Utility tractor | |
Series next: | Deutz-Fahr DX 3.60 |
Series back: | Deutz-Fahr DX 3.30 |
Production | |
Manufacturer: | Deutz-Fahr |
Factory: | Germany |
Capacity | |
ROPS Fuel: | 19.8 gal [74.9 L] |
Cab Fuel: | 22.5 gal [85.2 L] |
Hydraulic system: | 4 gal [15.1 L], 7.5 gal [28.4 L] *Optional |
3-Point Hitch | |
Rear Type: | II |
Control: | position and draft control |
Rear lift: | 5291 lbs [2399 kg] |
Front Hitch: | II*Optional. Not available with StarCab. |
Power Take-off (PTO) | |
Rear PTO: | independent |
Rear RPM: | 540 (1.375) |
Front PTO: | independent*Optional. Not available with StarCab. |
Clutch: | dry disc |
Front RPM: | 1000 |
Dimensions & Tires | |
2WD Wheelbase: | 79 inches [200 cm] |
4WD Wheelbase: | 82 inches [208 cm] |
Weight: | 6018 to 7319 pounds |
Front tire: | 7.50x16 |
2WD Rear tire: | 16.9x30 |
DX 3.50 Serial Numbers | |
- Serial numbers unknown - |
Deutz-Fahr DX 3.50 Power | |
Engine: | 61 hp [45.5 kW] |
Mechanical | |
Chassis: | 4x2 2WD, 4x4 MFWD 4WD |
Differential lock: | mechanical rear |
Steering: | power |
ROPS Brakes: | mechanical disc |
Cab Brakes: | hydraulic disc |
Cab: | Four-post ROPS with canopy. StarCab optional. |
Hydraulics | |
Type: | open center |
Capacity: | 4 gal [15.1 L], 7.5 gal [28.4 L] *Optional |
Pressure: | 2538 psi [175.0 bar] |
Rear valves: | 1 to 3 |
Front valves: | 2*Optional |
Pump flow: | 13.5 gpm [51.1 lpm] |
info | |
Bore/Stroke: | 3.94x4.84 inches [100 x 123 mm] |
Power: | 61 hp [45.5 kW] |
Rated RPM: | 2500 |
Oil capacity: | 8.5 qts [8.0 L] |
Engine Detail | |
Deutz F3L 913, diesel, 3-cylinder, air-cooled, 186.72 ci [3.1 L] |
info | |
Series next: | Deutz-Fahr DX 3.60 |
Series back: | Deutz-Fahr DX 3.30 |
Transmission | |
Type: | partially synchronized |
Gears: | 8 forward and 4 reverse |
Clutch: | dry disc |
Oil capacity: | 21.1 qts [20.0 L] |
Four synchronized gears (1-4) in two ranges (low/high) plus reverse range. |
info | |
Series next: | Deutz-Fahr DX 3.60 |
Series back: | Deutz-Fahr DX 3.30 |
Dimensions | |
2WD ROPS Weight: | 6018 lbs [2729 kg] |
2WD Cab Weight: | 6879 lbs [3120 kg] |
4WD ROPS Weight: | 6459 lbs [2929 kg] |
4WD Cab Weight: | 7319 lbs [3319 kg] |
2WD Wheelbase: | 79 inches [200 cm] |
4WD Wheelbase: | 82 inches [208 cm] |
Length: | 144.5 inches [367 cm] |
Width: | 82.3 inches [209 cm] |
Height (ROPS): | 92.5 inches [234 cm] |
Height (cab): | 97.5 inches [247 cm] |
Rear tread: | 59 to 78.8 inches [149 to 200 cm] |
Deutz-Fahr DX 3.50 Tires | |
2WD Standard tires (ag): | Front: 7.50x16. Rear: 16.9x30 |
4WD Standard tires (ag): | Front: 11.2x24. Rear: 16.9x30 |
2WD Optional tires (ag): | Front: 10.00x16. Rear: 16.9x24 |