FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| The IH/Farmall Super A was an improved version of the A. The biggest change was that the previous Lift-All system was replaced with the new Touch Control hydraulic system. This was in response to the Ferguson three-point system used by Ford. |
| Production | |
| Manufacturer: | International Harvester |
| Factory: | Louisville, Kentucky, USA, Chicago, Illinois, USA |
| Total built: | 107,636 |
| Original price (USD): | $1,400 (1954) |
| Variants | |
| Super AV: | high-clearance, vegetable |
| Capacity | |
| Fuel: | 11 gal [41.6 L] |
| Aux. fuel: | 0.75 gal [2.8 L] |
| Hydraulic system: | 2.1 gal [7.9 L] |
| Rear hubs: | 3 qts [2.8 L] (each) |
| Rear Hitch | |
| Type: | mid-mount Touch Control rockshaft |
| Power Take-off (PTO) | |
| Rear PTO: | transmission |
| Rear RPM: | 540 |
| Dimensions & Tires | |
| Wheelbase: | 71.1 inches [180 cm] |
| Weight: | 2400 to 3450 pounds |
| Front tire: | 5.00-15 |
| Rear tire: | 9-24 |
| Super A Serial Numbers | |
| Location: | On the right side of the seat support |
| Farmall Super A Power | |
| Drawbar (claimed): | 13 hp [9.7 kW] |
| PTO (claimed): | 16 hp [11.9 kW] |
| Mechanical | |
| Chassis: | 4x2 2WD |
| Steering: | manual |
| Brakes: | differential mechanical contracting band |
| Cab: | Open operator station. |
| Hydraulics | |
| Type: | IH Touch-Control |
| Capacity: | 2.1 gal [7.9 L] |
| Valves: | 1 |
| Belt Pulley | |
| Diameter: | 8.5 inches [21 cm] |
| Width: | 6 inches [15 cm] |
| RPM: | 1157 |
| Speed: | 2574 ft/min [784.56 meters/min] |
| Electrical | |
| Ground: | postitive |
| Battery | |
| Number: | 1 |
| Volts: | 6 |
| info | |
| Bore/Stroke: | 3.00x4.00 inches [76 x 102 mm] |
| Compression: | 6:1 |
| Rated RPM: | 1400 |
| Idle RPM: | 500-1540 |
| Firing order: | 1-3-4-2 |
| Starter volts: | 6 |
| Oil capacity: | 5 qts [4.7 L] |
| Oil change: | 120 h |
| Coolant capacity: | 13 qts [12.3 L] |
| Sparkplug gap: | 0.025 inches [0.635 mm] |
| Point gap: | 0.020 inches [0.508 mm] |
| Intake valve clearance: | 0.014 inches [0.356 mm] (hot) |
| Exhaust valve clearance: | 0.014 inches [0.356 mm] (hot) |
| Engine Detail | |
| International Harvester C113, gasoline, 4-cylinder, liquid-cooled, 113.1 ci [1.9 L] |
| info | |
| Previous model: | Farmall A |
| Next model: | International Harvester 100 Farmall 100 |
| Series next: | Farmall Super C |
| Transmission | |
| Type: | sliding gear |
| Gears: | 4 forward and 1 reverse |
| Clutch: | 9-inch dry disc |
| Oil capacity: | 4 qts [3.8 L], 4.5 qts [4.3 L] (PTO), 5 qts [4.7 L] (PTO/pulley) |
| info | |
| Previous model: | Farmall A |
| Next model: | International Harvester 100 Farmall 100 |
| Series next: | Farmall Super C |
| Dimensions | |
| Weight: | 2,400 lbs [1088 kg] |
| Weight (ballasted): | 3,450 lbs [1564 kg] |
| Wheelbase: | 71.1 inches [180 cm] |
| Length: | 106.8 inches [271 cm] |
| Width: | 55.8 inches [141 cm] |
| Height (steering wheel): | 64.25 inches [163 cm] |
| Height (exhaust): | 81.75 inches [207 cm] |
| Clearance (front axle): | 22.25 inches [56 cm] |
| Clearance (rear axle): | 21.625 inches [54 cm] |
| Min Clearance (drawbar): | 11.5 inches [29 cm] |
| Max Clearance (drawbar): | 16.8 inches [42 cm] |
| Front tread: | 43 inches [109 cm] 44 to 64 inches [111 to 162 cm] |
| Rear tread: | 40 to 68 inches [101 to 172 cm] |
| 2WD turn radius: | 9.5 feet [2.9 m] |
| Brakes 2WD turn radius: | 8.5 feet [2.6 m] |
| Farmall Super A Tires | |
| Ag front: | 5.00-15 |
| Ag rear: | 9-24 |