FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
The Farmall A and B were nearly identical tractors. The A featured an offset engine and wide front end. The B had a centered engine, seat offset to the right, and narrow front end. |
Production | |
Manufacturer: | Farmall (a part of International Harvester) |
Factory: | Chicago, Illinois, USA, Louisville, Kentucky, USA |
Total built: | 75,241 |
Original price (USD): | $770 |
Variants | |
B: | full width |
BN: | narrow tread |
Capacity | |
Fuel: | 10 gal [37.9 L] |
Aux. fuel: | 1 gal [3.8 L] |
Power Take-off (PTO) | |
Rear RPM: | 540 |
Dimensions & Tires | |
Weight: | 2400 lbs [1088 kg] |
Front tire: | 6-12 |
Rear tire: | 9-24 |
B Serial Numbers | |
Location: | Seat support bracket |
Farmall B Power | |
Plows: | 1 (16 inch) |
Drawbar (tested): | 16.21 hp [12.1 kW] |
Belt (tested): | 18.39 hp [13.7 kW] |
Mechanical | |
Chassis: | 4x2 2WD |
Steering: | manual |
Cab: | Open operator station. |
Belt Pulley | |
Diameter: | 8.5 inches [21 cm] |
Width: | 6 inches [15 cm] |
RPM: | 1157 |
Speed: | 2574 ft/min [784.56 meters/min] |
info | |
Bore/Stroke: | 3.00x4.00 inches [76 x 102 mm] |
Compression: | 5.33:1 |
Rated RPM: | 1400 |
Firing order: | 1-3-4-2 |
Oil capacity: | 5 qts [4.7 L] |
Coolant capacity: | 13.5 qts [12.8 L] |
Sparkplug gap: | 0.025 inches [0.635 mm] |
Point gap: | 0.020 inches [0.508 mm] |
Intake valve clearance: | 0.014 inches [0.356 mm] (hot) |
Exhaust valve clearance: | 0.014 inches [0.356 mm] (hot) |
Engine Detail | |
International Harvester C113, gasoline, 4-cylinder, liquid-cooled vertical I-head, 113.1 ci [1.9 L] |
Transmission | |
Type: | sliding gear |
Gears: | 4 forward and 1 reverse |
Dimensions | |
Weight: | 2400 lbs [1088 kg] |
Length: | 108 inches [274 cm] |
Width: | 79.5 inches [201 cm] |
Height: | 65 inches [165 cm] |
Rear tread: | 64/68/72/76 inches (wheel in) [162/172/182/193 cm] 80/84/88/92 inches (wheel out) [203/213/223/233 cm] |
Farmall B Tires | |
Ag front: | 4.00-15, 5.00-15 |
Ag rear: | 9-24 |