FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| Note: the Farmall model 1466 is the same as the International Harvester 1466. The following data is from the 1466 listing. |
| Production | |
| Manufacturer: | International Harvester |
| Total built: | 25,264 |
| Original price (USD): | $23,600 (1976) |
| Capacity | |
| Fuel: | 42 gal [159.0 L] |
| Hydraulic system: | 22 gal [83.3 L] |
| 3-Point Hitch | |
| Rear Type: | 3/2 |
| Rear lift (at 24"/610mm): | 5,600 lbs [2540 kg] |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 1000 |
| Dimensions & Tires | |
| Wheelbase: | 105 inches [266 cm] |
| Weight: | 13480 to 16660 pounds |
| Front tire: | 11L-15 |
| Rear tire: | 18.4-38 |
| 1466 Serial Numbers | |
| Location: | Clutch housing, left side |
| Farmall 1466 Power | |
| PTO (claimed): | 133 hp [99.2 kW] |
| Drawbar (tested): | 123.20 hp [91.9 kW] |
| PTO (tested): | 145.77 hp [108.7 kW] |
| Mechanical | |
| Chassis: | 4x2 2WD, 4x4 MFWD 4WD (optional) |
| Steering: | hydrostatic power |
| Brakes: | independent hydrostatic dry disc |
| Cab: | Cab optional with heat and A/C |
| Hydraulics | |
| Type: | open center |
| Capacity: | 22 gal [83.3 L] |
| Pressure: | 2000 psi [137.9 bar] |
| Valves: | 1 |
| Pump flow: | 12 gpm [45.4 lpm] |
| Total flow: | 24 gpm [90.8 lpm] |
| Steering flow: | 9 gpm [34.1 lpm] |
| Steering press.: | 1550 psi [106.9 bar] |
| Electrical | |
| Charging amps: | 32 |
| Battery | |
| Number: | 2 |
| Volts: | 6 |
| Amp-hours: | 172 |
| info | |
| Bore/Stroke: | 4.30x5.00 inches [109 x 127 mm] |
| Air cleaner: | dual dry elements |
| Rated RPM: | 2400 (early), 2600 (late) |
| Starter volts: | 12 |
| Oil capacity: | 18 qts [17.0 L] |
| Coolant capacity: | 27 qts [25.6 L] |
| Engine Detail | |
| International Harvester DT-436, turbocharged diesel, 6-cylinder, liquid-cooled, 436 ci [7.1 L] |
| info | |
| Speeds: | With 18.4-38 rear tires. |
| Transmission | |
| Transmission: | gear |
| Gears: | 8 forward and 4 reverse |
| Oil capacity: | 88 qts [83.3 L] |
| Four gears each in high, low, and reverse ranges. | |
| info | |
| Note: the Farmall model 1466 is the same as the International Harvester 1466. The following data is from the 1466 listing. |
| Dimensions | |
| Weight (operating): | 13,480 lbs [6114 kg] (with cab) |
| Weight (ballasted): | 16,660 lbs [7556 kg] |
| Wheelbase: | 105 inches [266 cm] |
| Length: | 168 inches [426 cm] |
| Width: | 98 inches [248 cm] |
| Height (exhaust): | 111 inches [281 cm] |
| Clearance (drawbar): | 16 inches [40 cm] |
| 2WD turn radius: | 13.3 feet [4.1 m], 11.4 feet [3.5 m] (with brakes) |
| Farmall 1466 Tires | |
| Ag front: | 11L-15 |
| Ag rear: | 18.4-38 |