FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| The 706 was available with a new Torque Amplifier design that prevented free-wheeling when going downhill. An over-center hand clutch was an option, usually found on Wheatland (standard tread) models. The 706 was available with either the Fast Hitch or a standard 3-point hitch. The PTO featured both 540 and 1000 RPM shafts, both of which turned while in use. |
| Production | |
| Manufacturer: | Farmall (a part of International Harvester) |
| Total built: | 46,146 |
| Original price (USD): | $6,100 (1967) |
| Variants | |
| Farmall 706: | row-crop |
| IH 706: | standard-tread |
| IH 2706: | industrial |
| 706 Hi-Clear: | high-crop |
| Capacity | |
| Fuel: | 33 gal [124.9 L] (gas/diesel), 39 gal [147.6 L] (LP gas) |
| Hydraulic system: | 17 gal [64.3 L] |
| Rear Hitch | |
| Type: | IH Fast Hitch |
| 3-Point Hitch | |
| Rear Type: | 2 |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 540/1000, 1000 |
| Engine RPM: | 540@2100 1000@2100 |
| Dimensions & Tires | |
| Wheelbase: | 97.5 inches [247 cm] (2WD), 94.75 inches [240 cm] (4WD) |
| Weight: | 7530 to 9160 pounds |
| Front tire: | 6.50-16 |
| Rear tire: | 15.5-38 |
| 706 Serial Numbers | |
| Location: | Serial number plate on the left side of the 706 clutch housing. |
| Farmall 706 Power | |
| Engine (gross): | 89 hp [66.4 kW] |
| Drawbar (claimed): | 65 hp [48.5 kW] |
| PTO (claimed): | 73.5 hp [54.8 kW] |
| Drawbar (tested): | 67.46 hp [50.3 kW] |
| PTO (tested): | 76.56 hp [57.1 kW] |
| Mechanical | |
| Chassis: | 4x2 2WD, 4x4 MFWD 4WD |
| Steering: | hydrostatic power |
| Brakes: | hydraulic dry double disc |
| Cab: | Cab optional, A/C available starting in 1966 |
| Hydraulics | |
| Type: | open center |
| Capacity: | 17 gal [64.3 L] |
| Valves: | 1 or 2 |
| Pump flow: | 12 gpm [45.4 lpm], 17 gpm [64.3 lpm] (optional), 3 gpm [11.4 lpm] (PTO pump) |
| Steering flow: | 9 gpm [34.1 lpm] |
| Belt Pulley | |
| Diameter: | 11 inches [27 cm] |
| Width: | 7.5 inches [19 cm] |
| RPM: | 1055 |
| Speed: | 3,038 ft/min [925.98 meters/min] |
| Electrical | |
| Ground: | negative |
| Charging amps: | 25 (generator), 32 (alternator) |
| Battery | |
| Number: | 1 (gas), 2 (diesel) |
| Volts: | 12 (gas), 6 (diesel) |
| Amp-hours: | 60 (gas/LP), 130 (diesel) |
| info | |
| Bore/Stroke: | 3.6875x4.3906 inches [94 x 112 mm] |
| Power (gross): | 89 hp [66.4 kW] |
| Air cleaner: | dual stage dry |
| Rated RPM: | 2300 |
| Idle RPM: | 900-2300 |
| Firing order: | 1-5-3-6-2-4 |
| Starter volts: | 12 |
| Oil capacity: | 9 qts [8.5 L] |
| Coolant capacity: | 21.5 qts [20.3 L] |
| Intake valve clearance: | 0.027 inches [0.686 mm] *Hot |
| Exhaust valve clearance: | 0.027 inches [0.686 mm] *Hot |
| Engine Detail | |
| The 282 was the original diesel available for the 706. It was later replaced by the German-built 310 diesel., International Harvester D282, diesel, 6-cylinder, liquid-cooled, 282 ci [4.6 L] |
| info | |
| IH Hy-Tran |
| Transmission | |
| Transmission: | sliding gear |
| Gears: | 8 forward and 4 reverse |
| Clutch: | 12-inch dry disc |
| Oil capacity: | 68 qts [64.4 L] |
| The 706 transmission is controlled by means of two levers. A range lever selects high, low, reverse range, or neutral. A separate speed lever selects one of four speeds. The tractor must be stopped, and the clutch used, to change range or speed gears. | |
| info | |
| Next model: | Farmall 756 |
| Series next: | Farmall 806 |
| Dimensions | |
| Weight (shipping): | 7,530 lbs [3415 kg] (gas), 7,780 lbs [3529 kg] (diesel) |
| Weight (operating): | 8,285 lbs [3758 kg] (263 gas), 8,530 lbs [3869 kg] (282 diesel), 8,700 lbs [3946 kg] (291 gas), 9,160 lbs [4154 kg] (310 diesel) |
| Weight (ballasted): | 10,710 lbs [4858 kg] |
| Wheelbase: | 97.5 inches [247 cm] (2WD), 94.75 inches [240 cm] (4WD) |
| Length: | 157 inches [398 cm] (2WD), 161 inches [408 cm] (4WD) |
| Width: | 92 inches [233 cm] (min), 110 inches [279 cm] (max) |
| Height (steering wheel): | 80 inches [203 cm] (2WD), 81.5 inches [207 cm] (4WD) |
| Ground clearance: | 17 inches [43 cm] |
| Clearance (front axle): | 21 inches [53 cm] (2WD) |
| Clearance (drawbar): | 13 inches [33 cm] (2WD) |
| Front tread: | 8/16 inches (tricycle) [20/40 cm]50 to 74 inches [127 to 187 cm] 56 to 80 inches [142 to 203 cm] |
| Rear tread: | 56 to 94 inches [142 to 238 cm] 56 to 96 inches (PAVT) [142 to 243 cm] (PAVT) |
| 2WD turn radius: | 9.3 feet [2.8 m] |
| 4WD turn radius: | 16.3 feet [5.0 m] |
| Farmall 706 Tires | |
| Ag front: | 6.50-16 (2WD), 11.2-24 (4WD) |
| Ag rear: | 15.5-38 |
| info | |
| Next model: | Farmall 756 |
| Series next: | Farmall 806 |
| Loader | |
| Loader type: | International Harvester 2000 |
| With double-acting lift cylinders., | |
| Weight: | 1417 lbs [642 kg] |
| Height (to pin): | 125 inches [317 cm] |
| Clearance, dumped bucket: | 105 inches [266 cm] |
| Rollback angle: | 18 |
| Breakout force (lift): | 4000 lbs [1814 kg] |
| Lift to full height (at pin): | 2000 lbs [907 kg] |
| Bucket width: | 48 inches [121 cm], 60 inches [152 cm] |