FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
The Farmall 560 experienced problems due to the final drive not being strong enough to handle the power of the engine. An entirely new rear end was offered by International in mid 1959, and the company sponsored a massive replacement program. |
Production | |
Manufacturer: | Farmall (a part of International Harvester) |
Total built: | 65,982 |
Original price (USD): | $5,500 (1963) |
Variants | |
IH 560: | standard-tread |
Hi-Clear: | high-crop |
Capacity | |
Fuel: | 33 gal [124.9 L], 37 gal [140.0 L] (LP) |
Hydraulic system: | 16 gal [60.6 L] |
Rear Hitch | |
Type: | IH Fast Hitch |
Power Take-off (PTO) | |
Rear PTO: | independent |
Rear RPM: | 540 |
Dimensions & Tires | |
Wheelbase: | 96 inches [243 cm], 100 inches [254 cm] (Hi-Clear) |
Weight: | 6563 to 6785 pounds |
Front tire: | 6.00-16 |
Rear tire: | 12.4-38 |
560 Serial Numbers | |
Location: | Clutch housing, right side |
Farmall 560 Power | |
Drawbar (claimed): | 54.8 hp [40.9 kW] |
PTO (claimed): | 59.48 hp [44.4 kW] |
Plows: | 5 |
Drawbar (tested): | 53.12 hp [39.6 kW] |
PTO (tested): | 63.03 hp [47.0 kW] |
Belt (tested): | 60.11 hp [44.8 kW] |
Mechanical | |
Chassis: | 4x2 2WD |
Steering: | manual rack-and-pinion, hydrostatic power optional |
Brakes: | independent mechanical disc |
Cab: | Open operator station. |
Hydraulics | |
Capacity: | 16 gal [60.6 L] |
Valves: | 1 to 3 |
Pump flow: | 12 gpm [45.4 lpm], 17 gpm [64.3 lpm] (optional) |
Steering flow: | 2.5 gpm [9.5 lpm] |
Belt Pulley | |
Diameter: | 11 inches [27 cm] |
Width: | 7.5 inches [19 cm] |
Electrical | |
Ground: | negative |
Charging system: | generator |
Charging amps: | 20 |
Battery | |
Number: | 1 (gas), 2 (diesel) |
Volts: | 12 (gas), 6 (diesel) |
info | |
Bore/Stroke: | 3.6875x4.3906 inches [94 x 112 mm] |
Air cleaner: | oil bath |
Compression: | 18.2:1 |
Rated RPM: | 1800 |
Firing order: | 1-5-3-6-2-4 |
Starter volts: | 12 |
Oil capacity: | 9 qts [8.5 L] |
Coolant capacity: | 16 qts [15.1 L] |
Exhaust valve clearance: | 0.027 inches [0.686 mm] (hot) |
Engine Detail | |
International Harvester D282, diesel, 6-cylinder, liquid-cooled vertical I-head, 281.3 ci [4.6 L] |
info | |
Speeds: | With 13.6-38 rear tires. |
Transmission | |
Type: | sliding gear |
Gears: | 5 forward and 1 reverse |
Oil capacity: | 64 qts [60.6 L] |
Tractor must be stopped and clutch used to shift gears. |
info | |
Previous model: | Farmall 450 |
Series back: | Farmall 460 |
Dimensions | |
Weight (operating): | 6,563 lbs [2976 kg] (gas), 6,785 lbs [3077 kg] (diesel) |
Weight (ballasted): | 9,460 lbs [4291 kg] |
Wheelbase: | 96 inches [243 cm], 100 inches [254 cm] (Hi-Clear) |
Length: | 141 inches [358 cm], 155 inches [393 cm] (Hi-Clear) |
Width: | 85 inches [215 cm] (min), 88 inches [223 cm] (Hi-Clear max), 107 inches [271 cm] (max) |
Height (steering wheel): | 88 inches [223 cm], 107 inches [271 cm] (Hi-Clear) |
Farmall 560 Tires | |
Ag front: | 6.00-16, 6.00-20 (Hi-Clear) |
Ag rear: | 12.4-38, 13.6-38 |
info | |
Previous model: | Farmall 450 |
Series back: | Farmall 460 |
Loader | |
Loader type: | International Harvester 2000 |
Weight: | 1417 lbs [642 kg] |
Height (to pin): | 125 inches [317 cm] |
Clearance, dumped bucket: | 105 inches [266 cm] |
Rollback angle: | 18 |
Breakout force (lift): | 4000 lbs [1814 kg] |
Lift to full height (at pin): | 2000 lbs [907 kg] |
Bucket width: | 48 inches [121 cm], 60 inches [152 cm] |