FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| The Farmall 460 experienced rear-end problems associated with too much engine power for the final drive. International offered an entirely new rear end in mid 1959 to replace the original. |
| Production | |
| Manufacturer: | Farmall (a part of International Harvester) |
| Original price (USD): | $4,100 (1963) |
| Variants | |
| IH 460: | utility |
| Hi-Clear: | high-crop |
| Capacity | |
| Hydraulic system: | 10 gal [37.9 L] |
| Rear Hitch | |
| Type: | IH Fast Hitch |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 540 |
| Dimensions & Tires | |
| Wheelbase: | 95 inches [241 cm], 100 inches [254 cm] (Hi-Clear) |
| Weight: | 5835 to 6055 pounds |
| Front tire: | 5.50-16 |
| Rear tire: | 12.4-38 |
| 460 Serial Numbers | |
| Location: | Serial number plate on the right side of the Farmall 460, on the clutch housing. |
| Farmall 460 Power | |
| Drawbar (claimed): | 45.3 hp [33.8 kW] |
| PTO (claimed): | 49.47 hp [36.9 kW] |
| Plows: | 4 |
| Drawbar (tested): | 46.11 hp [34.4 kW] |
| Belt (tested): | 50.10 hp [37.4 kW] |
| Mechanical | |
| Chassis: | 4x2 2WD |
| Steering: | power |
| Brakes: | differential mechanical disc |
| Cab: | Open operator station. |
| Hydraulics | |
| Capacity: | 10 gal [37.9 L] |
| Valves: | 2 |
| Pump flow: | 12 gpm [45.4 lpm] |
| Electrical | |
| Charging system: | generator |
| Charging amps: | 20 |
| Battery | |
| Number: | 2 (diesel), 1 (gas/LP) |
| Volts: | 6 (diesel), 12 (gas/LP) |
| info | |
| Bore/Stroke: | 3.5625x3.6875 inches [90 x 94 mm] |
| Air cleaner: | oil bath |
| Compression: | 7.2:1 |
| Rated RPM: | 1800 |
| Starter volts: | 12 |
| Engine Detail | |
| International Harvester C221, gasoline, 6-cylinder, liquid-cooled, 221 ci [3.6 L] |
| info | |
| IH Hy-Tran |
| Transmission | |
| Transmission: | sliding gear |
| Gears: | 5 forward and 1 reverse |
| Oil capacity: | 40 qts [37.9 L] |
| Tractor must be stopped and clutch used to shift gears. | |
| info | |
| Previous model: | Farmall 350 |
| Series next: | Farmall 560 |
| Dimensions | |
| Weight (operating): | 5,835 lbs [2646 kg] (gas), 6,055 lbs [2746 kg] (diesel) |
| Weight (ballasted): | 8,931 lbs [4051 kg] |
| Wheelbase: | 95 inches [241 cm], 100 inches [254 cm] (Hi-Clear) |
| Length: | 140 inches [355 cm], 153 inches [388 cm] (Hi-Clear) |
| Width: | 83.5 inches [212 cm] (min), 86 inches [218 cm] (Hi-Clear min), 105 inches [266 cm] (max) |
| Height: | 78 inches [198 cm] (steering wheel), 90 inches [228 cm] (Hi-Clear steering) |
| Ground clearance: | 19.5 inches [49 cm] (frame), 22 inches [55 cm] (front-axle), 25.5 inches [64 cm] (rear axle), 30.5 inches [77 cm] (Hi-Clear frame) |
| 2WD turn radius: | 9.5 feet [2.9 m], 9 feet [2.7 m] (with brake), 14.5 feet [4.4 m] (Hi-Clear) |
| Farmall 460 Tires | |
| Ag front: | 5.50-16, 6.00-20 (Hi-Clear) |
| Ag rear: | 12.4-38, 11-38 (Hi-Clear) |
| info | |
| Previous model: | Farmall 350 |
| Series next: | Farmall 560 |
| Loader | |
| Loader type: | International Harvester 2000 |
| Weight: | 1417 lbs [642 kg] |
| Height (to pin): | 125 inches [317 cm] |
| Clearance, dumped bucket: | 105 inches [266 cm] |
| Rollback angle: | 18 |
| Breakout force (lift): | 4000 lbs [1814 kg] |
| Lift to full height (at pin): | 2000 lbs [907 kg] |
| Bucket width: | 48 inches [121 cm], 60 inches [152 cm] |