FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 1954 - 1956, Row-Crop tractor | |
| Previous model: | Farmall Super M |
| Next model: | Farmall 450 |
| Series back: | Farmall 300 |
| Production | |
| Manufacturer: | Farmall (a part of International Harvester) |
| Factory: | Rock Island, Illinois, USA |
| Total built: | 40,957 |
| Original price (USD): | $3,500 (1954) |
| Variants | |
| 400: | row-crop |
| W-400: | standard |
| 400 Hi-Clear: | high-crop |
| Capacity | |
| Fuel: | 21.5 gal [81.4 L] |
| Aux. fuel: | 0.9 gal [3.4 L] |
| Hydraulic system: | 3.5 gal [13.2 L], 3.63 gal [13.7 L] (power steering) |
| Rear Hitch | |
| Type: | IH Fast Hitch (optional) |
| Rear lift: | 2,000 lbs [907 kg] |
| Power Take-off (PTO) | |
| Rear PTO: | transmission, independent (optional) |
| Rear RPM: | 540 |
| Engine RPM: | 537@1450 (trans.) 534@1450 (ind.) |
| Dimensions & Tires | |
| Wheelbase: | 95.75 inches [243 cm] |
| Weight: | 6300 to 9600 pounds |
| Front tire: | 6.00-16 |
| Rear tire: | 12-38 |
| 400 Serial Numbers | |
| Location: | Left side of clutch housing |
| Farmall 400 Power | |
| Drawbar (claimed): | 37 hp [27.6 kW] |
| PTO (claimed): | 45 hp [33.6 kW] |
| Drawbar (tested): | 48.12 hp [35.9 kW] |
| Belt (tested): | 52.36 hp [39.0 kW] |
| Mechanical | |
| Chassis: | 4x2 2WD |
| Steering: | manual, power optional |
| Brakes: | manual disc |
| Cab: | Open operator station. |
| Hydraulics | |
| Type: | Hydra-Touch |
| Capacity: | 3.5 gal [13.2 L], 3.63 gal [13.7 L] (power steering) |
| Valves: | 3 |
| Belt Pulley | |
| Diameter: | 11 inches [27 cm] |
| Width: | 7.5 inches [19 cm] |
| RPM: | 899 |
| Speed: | 2,588 ft/min [788.82 meters/min] |
| Electrical | |
| Ground: | positive (6V), negative (12V) |
| Charging system: | generator |
| Battery | |
| Number: | 1 |
| Volts: | 6 (gas), 12 (diesel) |
| info | |
| Bore/Stroke: | 4.00x5.25 inches [102 x 133 mm] |
| Fuel system: | 1.25-inch updraft carburetor |
| Air cleaner: | oil bath |
| Compression: | 6.3:1 |
| Rated RPM: | 1450 |
| Idle RPM: | 400-1600 |
| Firing order: | 1-3-4-2 |
| Starter volts: | 6 |
| Oil capacity: | 8 qts [7.6 L] |
| Oil change: | 150 h |
| Coolant capacity: | 26 qts [24.6 L] |
| Sparkplug gap: | 0.023 inches [0.584 mm] |
| Intake valve clearance: | 0.017 inches [0.432 mm] (hot) |
| Exhaust valve clearance: | 0.017 inches [0.432 mm] (hot) |
| Engine Detail | |
| International Harvester C264, gasoline, 4-cylinder, liquid-cooled vertical I-head, 264 ci [4.3 L] |
| info | |
| Speeds: | With 12-38 rear tires. |
| Transmission | |
| Transmission: | Torque Amplifier |
| Type: | partial power shift |
| Gears: | 10 forward and 2 reverse |
| Clutch: | 12-inch dry disc |
| info | |
| Previous model: | Farmall Super M |
| Next model: | Farmall 450 |
| Series back: | Farmall 300 |
| Dimensions | |
| Weight (operating): | 6,300 lbs [2857 kg] |
| Weight (ballasted): | 9,600 lbs [4354 kg] |
| Wheelbase: | 95.75 inches [243 cm] |
| Length: | 141.125 inches [358 cm] |
| Min Width: | 84.5 inches [214 cm] |
| Max Width: | 107.25 inches [272 cm] |
| Height (steering wheel): | 80.75 inches [205 cm] |
| Frame Ground clearance: | 18.5 inches [46 cm] |
| Clearance (front axle): | 22.5 inches [57 cm] |
| Clearance (rear axle): | 26.25 inches [66 cm] |
| Front tread: | 8.375/12.25 inches (tricycle) [21/31 cm]57 to 90 inches [144 to 228 cm] |
| Rear tread: | 50 to 94 inches [127 to 238 cm] 50 to 106 inches (long axle) [127 to 269 cm] (long axle) |
| Farmall 400 Tires | |
| Ag front: | 6.00-16 |
| Ag rear: | 12-38 |