8160 Specifications - 8160 Specs

info
1996 - 1999
Next model: New Holland TM115
Series next: Ford-New Holland 8260
Production
Manufacturer: Ford-New Holland
Factory: England
Original price (USD): $44,000 (1999)
Variants
Fiat M100,
Capacity
Fuel: 85 gal [321.7 L]
Hydraulic system: 23.7 gal [89.7 L] (18-speed), 19.2 gal [72.7 L] (23-speed)
Front hubs: 1.8 qts [1.7 L] (each)
Front diff.: 2.3 qts [2.2 L]
3-Point Hitch
Rear Type: II
Rear lift (at 24"/610mm): 8,500 lbs [3855 kg]
Power Take-off (PTO)
Rear PTO: independent
Rear RPM: 540/1000
Dimensions & Tires
Wheelbase: 108.3 inches [275 cm] (2WD), 107.2 inches [272 cm] (4WD)
Weight: 11616 to 12606 pounds
Front tire: 11.00-16
Rear tire: 18.4R38 (2WD)
8160 Serial Numbers
- Serial numbers unknown -
Ford-New Holland 8160 Power
PTO (claimed): 90 hp [67.1 kW]
Mechanical
Chassis: 4x2 2WD, 4x4 MFWD 4WD (optional)
Differential lock: Rear (2WD) or front and rear (4WD) with push-button operation. Manual and automatic modes.
Steering: hydrostatic power
Brakes: differential hydraulic wet disc
Cab: Two-post ROPS. Optional cab.
Hydraulics
Type: closed center load sensing
Capacity: 23.7 gal [89.7 L] (18-speed), 19.2 gal [72.7 L] (23-speed)
Pressure: 2755 psi [190.0 bar]
Valves: 2 to 4
Pump flow: 26 gpm [98.4 lpm]
Steering flow: 15.6 gpm [59.0 lpm]
Steering press.: 2465 psi [170.0 bar]
Electrical
Ground: negative
Charging system: alternator
Charging amps: 70, 100 (with cab)
Battery
Number: 2
Cold-cranking amps: 900
Volts: 12
info
Bore/Stroke: 4.5x5.0 inches [114 x 127 mm]
Compression: 17.5:1
Rated RPM: 2200
Idle RPM: 700-2420
Operating RPM: 1500-2200
Torque RPM: 1400
Firing order: 1-5-3-6-2-4
Starter volts: 12
Starter power: 4.9 hp [3.7 kW]
Oil capacity: 20 qts [18.9 L]
Coolant capacity: 24.8 qts [23.5 L] (ROPS), 26.9 qts [25.5 L] (cab)
Intake valve clearance: 0.016 inches [0.406 mm] (cold)
Exhaust valve clearance: 0.018 inches [0.457 mm] (cold)
Engine Detail
New Holland Genesis, diesel, 6-cylinder, liquid-cooled, 456 ci [7.5 L]
info
Next model: New Holland TM115
Series next: Ford-New Holland 8260
Transmission
Transmission: Dual Command
Type: partially synchronized
Gears: 23 forward and 12 reverse
Clutch: wet disc
Oil capacity: 76.8 qts [72.7 L]
Four gears (1-4) in three ranges (A-C) with left-hand shuttle lever and push-button underdrive. Gear shifts may be made on the move with the clutch. The tractor must be stopped to shift range. The forward-reverse shuttle, and the push-button underdrive, may be performed on the move without the clutch. Reverse gears operate in underdrive only. Optional creeper doubles the available speeds to 46 forward and 24 reverse.
info
Next model: New Holland TM115
Series next: Ford-New Holland 8260
Dimensions
Weight (shipping): 11,616 lbs [5269 kg] (2WD cab), 12,606 lbs [5718 kg] (4WD cab)
Weight (max capacity): 16,530 lbs [7498 kg]
Front axle load: 5,730 lbs [2599 kg] (2WD), 7,715 lbs [3499 kg] (4WD)
Rear axle load: 14,330 lbs [6500 kg]
Wheelbase: 108.3 inches [275 cm] (2WD), 107.2 inches [272 cm] (4WD)
Length: 180 inches [457 cm] (2WD), 182 inches [462 cm] (4WD)
Width: 84 inches [213 cm] (min)
Height (ROPS): 114.5 inches [290 cm]
Height (cab): 111.5 inches [283 cm]
Height (exhaust): 119.5 inches [303 cm] (2WD), 117.3 inches [297 cm] (4WD)
Clearance (front axle): 23.1 inches [58 cm] (2WD), 19 inches [48 cm] (4WD)
Clearance (drawbar): 15 inches [38 cm]
Front tread: 60.7 to 86.1 inches (2WD) [154 to 218 cm] (2WD) 61.1 to 83.3 inches (4WD) [155 to 211 cm] (4WD)
Rear tread: 60.2 to 87.9 inches (manual) [152 to 223 cm] (manual) 59.8 to 90.6 inches (power) [151 to 230 cm] (power)
Ford-New Holland 8160 Tires
Standard tires (ag): Front: 11.00-16. Rear: 18.4R38 (2WD), Front: 14.9R28. Rear: 18.4R38 (4WD)