FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 1975 - 1981, Utility tractor | |
| Previous model: | Ford 3000 |
| Next model: | Ford 3610 |
| Series back: | Ford 2600 |
| Production | |
| Manufacturer: | Ford |
| Original price (USD), $7,200 (1981 ), | |
| Capacity | |
| Fuel: | 13 gal [49.2 L] |
| Hydraulic system: | 6.15 gal [23.3 L] |
| 3-Point Hitch | |
| Rear Type: | I |
| Control: | top-link draft sensing |
| Rear lift: | 1940 lbs [879 kg] |
| Power Take-off (PTO) | |
| Rear PTO: | transmission, live*Optional with 8-speed Dual-Range transmission. |
| Rear RPM: | 540 (1.375) |
| Dimensions & Tires | |
| Wheelbase: | 75.8 inches [192 cm] |
| Weight: | 3846 to 6900 pounds |
| Front tire: | 6.00-16 |
| Rear tire: | 12.4-28 |
| Ford 3600 Power | |
| Engine (gross): | 48 hp [35.8 kW] |
| Engine (net): | 45 hp [33.6 kW] |
| Drawbar (claimed): | 34 hp [25.4 kW] |
| PTO (claimed): | 40 hp [29.8 kW] |
| Drawbar (tested): | 34.35 hp [25.6 kW] |
| PTO (tested): | 40.62 hp [30.3 kW] |
| Mechanical | |
| Chassis: | 4x2 2WD |
| Steering: | power |
| Brakes: | differential mechanical expanding shoe |
| Cab: | Open operator station. Two-post ROPS optional with available canopy. |
| Hydraulics | |
| Capacity: | 6.15 gal [23.3 L] |
| Pressure: | 2100 psi [144.8 bar] |
| Pump flow: | 8.5 gpm [32.2 lpm] |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 32, 51*Optional |
| Battery | |
| Number: | 1 |
| Volts: | 12 |
| Gas Amp-hours: | 77 |
| Diesel Amp-hours: | 128 |
| info | |
| Bore/Stroke: | 4.20x4.20 inches [107 x 107 mm] |
| Power (gross): | 48 hp [35.8 kW] |
| Air cleaner: | oil bath |
| Pre-heating: | ether injection*Optional, coolant heater*Optional |
| Compression: | 16.3:1 |
| Rated RPM: | 2000 |
| Torque: | 135 lb-ft [183.1 Nm] |
| Torque RPM: | 1400 |
| Starter: | electric |
| Starter volts: | 12 |
| Oil capacity: | 7 qts [6.6 L] |
| Coolant capacity: | 11 qts [10.4 L] |
| Engine Detail | |
| Ford, diesel, 3-cylinder, liquid-cooled, 175 ci [2.9 L] |
| info | |
| Speeds: | With 12.4-28 rear tires. |
| Transmission | |
| Type: | gear |
| Gears: | 6 forward and 2 reverse |
| Oil capacity: | 13.8 qts [13.1 L] |
| info | |
| Previous model: | Ford 3000 |
| Next model: | Ford 3610 |
| Series back: | Ford 2600 |
| Dimensions | |
| Weight (shipping): | 3846 lbs [1744 kg] |
| Weight (operating): | 4415 lbs [2002 kg] (6-speed), 5590 lbs [2535 kg] (8-speed, cab) |
| Weight (ballasted): | 6900 lbs [3129 kg] |
| Wheelbase: | 75.8 inches [192 cm] |
| Length: | 127 inches [322 cm] |
| Width: | 64 inches [162 cm] *Minimum width |
| Height (hood): | 54 inches [137 cm] |
| Clearance (front axle): | 21.5 inches [54 cm] |
| Clearance (rear axle): | 13.3 inches [33 cm] |
| Front tread: | 52 to 80 inches [132 to 203 cm] |
| Rear tread: | 52 to 76 inches [132 to 193 cm] 52 to 80 inches*Power adjust wheels [132 to 203 cm] ((Power adjust wheels)) |
| Ford 3600 Tires | |
| Ag front: | 6.00-16 |
| Ag rear: | 12.4-28 |
| info | |
| Previous model: | Ford 3000 |
| Next model: | Ford 3610 |
| Series back: | Ford 2600 |
| Loader | |
| Loader type: | Ford 772A |
| Weight: | 930 lbs [421 kg] |
| Height (to pin): | 124 inches [314 cm] |
| Clearance, dumped bucket: | 98.5 inches [250 cm] |
| Dump reach: | 32.3 inches [82 cm] |
| Dump angle: | 33 |
| Reach at ground: | 75 inches [190 cm] |
| Rollback angle: | 9 |
| Breakout force (lift): | 3800 lbs [1723 kg] |
| Lift to full height (at pin): | 2460 lbs [1115 kg] |
| Bucket width: | 48 inches [121 cm] |
| Raise time to height: | 12 s |
| Lowering time: | 7 s |
| Rollback time: | 3 s |