FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
1983 - 1987 Ten Compact Series, Compact Utility tractor | |
Next model: | Ford 2120 |
Series back: | Ford 1910 |
Production | |
Distributor: | Ford |
Manufacturer: | Shibaura |
Factory: | Japan |
Original price (USD), $13,200 (1987 ), |
Capacity | |
Fuel: | 10.6 gal [40.1 L] |
3-Point Hitch | |
Rear Type: | I |
Control: | position and draft control |
Rear lift (at 24"/610mm): | 2013 lbs [913 kg] |
Power Take-off (PTO) | |
Rear PTO: | live |
Rear RPM: | 540 (1.375) |
Engine RPM: | 540@2392 |
Dimensions & Tires | |
2WD Wheelbase: | 73.4 inches [186 cm] |
4WD Wheelbase: | 75.6 inches [192 cm] |
Weight: | 3635 to 3946 pounds |
Front tire: | 6.00-16 |
2WD Rear tire: | 13.6-28 |
2110 Serial Numbers | |
Location: | Serial number plate on the left side of the Ford 2110, near the clutch pedal. |
Ford 2110 Power | |
Engine: | 38 hp [28.3 kW] |
PTO (claimed): | 34.5 hp [25.7 kW] |
Drawbar (tested): | 30.10 hp [22.4 kW] |
PTO (tested): | 35.11 hp [26.2 kW] |
Mechanical | |
Chassis: | 4x2 2WD, 4x4 MFWD 4WD |
Final drives: | spur gear |
Differential lock: | mechanical rear |
Steering: | power |
Brakes: | differential mechanical drum |
Cab: | Two-post fixed ROPS. |
Hydraulics | |
Type: | open center |
Pressure: | 2133 psi [147.1 bar] |
Pump flow: | 8.6 gpm [32.6 lpm] |
Total flow: | 12.1 gpm [45.8 lpm] |
Steering flow: | 3.5 gpm [13.2 lpm] |
Electrical | |
Ground: | negative |
Charging system: | alternator |
Charging amps: | 35 |
Charging volts: | 12 |
Battery | |
Number: | 1 |
Volts: | 12 |
Amp-hours: | 100 |
info | |
Bore/Stroke: | 3.346x3.937 inches [85 x 100 mm] |
Power: | 38 hp [28.3 kW] |
Fuel use: | 2.52 gal/hour [9.5 l/hour] |
Air cleaner: | dry |
Pre-heating: | glow plugs |
Compression: | 21:1 |
Rated RPM: | 2500 |
Torque: | 89.5 lb-ft [121.4 Nm] |
Torque RPM: | 2000 |
Starter volts: | 12 |
Oil capacity: | 8 qts [7.6 L] |
Coolant capacity: | 9.1 qts [8.6 L] |
Engine Detail | |
Shibaura, diesel, 4-cylinder, liquid-cooled, 138.5 ci [2.3 L] |
info | |
Speeds: | With 13.6-28 rear tires. |
Transmission | |
Type: | unsynchronized gear |
Gears: | 12 forward and 4 reverse |
Clutch: | 240mm dry disc |
Oil capacity: | 34.3 qts [32.5 L] |
Three gears, plus reverse, in four ranges. |
info | |
Next model: | Ford 2120 |
Series back: | Ford 1910 |
Dimensions | |
2WD Weight: | 3635 lbs [1648 kg] |
4WD Weight: | 3946 lbs [1789 kg] |
Weight (ballasted): | 5110 lbs [2317 kg] |
2WD Wheelbase: | 73.4 inches [186 cm] |
4WD Wheelbase: | 75.6 inches [192 cm] |
Length: | 131.1 inches [332 cm] |
Width: | 61.7 inches [156 cm] |
Height (steering wheel): | 63 inches [160 cm] |
Height (exhaust): | 79.9 inches [202 cm] |
Ground clearance: | 15.6 inches [39 cm] |
2WD [121 to 182 cm] 2WD} 46.8 inches [118 cm] {4WD} Front tread: | 48 to 72 inches |
Rear tread: | 48 to 72 inches [121 to 182 cm] |
Ford 2110 Tires | |
2WD Standard tires (ag): | Front: 6.00-16. Rear: 13.6-28 |
4WD Standard tires (ag): | Front: 8.00-18. Rear: 13.6-28 |
Lawn/turf front: | 25x8.50-14 (2WD), 27x8.50-15 (4WD) |
Lawn/turf rear: | 18.4x16.1 |
info | |
Listed for the Ford 2110 were 59 and 72 inch rear finish mowers as well as 60 inch rear rotary cutters. |
60" Snow blower | |
Type: | rear-mount Ford 715, two-stage with hydraulic lift |
Clearing width: | 60 inches [152 cm] |
Loader | |
Loader type: | Ford 776A/B |
Weight: | 1,036 lbs [469 kg] (776A), 1,260 lbs [571 kg] (776B quick attach) |
Height (to pin): | 124 inches [314 cm] |
Clearance, dumped bucket: | 102 inches [259 cm] |
Dump reach: | 26 inches [66 cm] |
Dump angle: | 40 |
Reach at ground: | 75 inches [190 cm] |
Rollback angle: | 6 |
Breakout force (lift): | 2,625 lbs [1190 kg] |
Lift to full height (at pin): | 1,750 lbs [793 kg] |
Bucket capacity: | 0.37 cu yd [0.3 cu m], 0.44 cu yd [0.3 cu m], 0.56 cu yd [0.4 cu m] |
Bucket width: | 48 inches [121 cm], 60 inches [152 cm], 72 inches [182 cm] |
Raise time to height: | 6.7 s |
Bucket dump time: | 3.0 s |
Lowering time: | 4.0 s |
Backhoe | |
Backhoe type: | Ford 758A |
Bucket width: | 8 inches [20 cm], 13 inches [33 cm], 16 inches [40 cm] |
Digging depth: | 96 inches [243 cm] |
2-Foot flat digging depth: | 94 inches [238 cm] |
8-Foot flat digging depth: | 56 inches [142 cm] |
Reach from pivot: | 140.4 inches [356 cm] |
Loading height: | 83.6 inches [212 cm] |
Dipperstick force: | 726 lbs [329 kg] |