FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
1983 - 1986 Ten Compact Series, Compact Utility tractor | |
Previous model: | Ford 1300 |
Next model: | Ford 1320 |
Series next: | Ford 1510 |
Series back: | Ford 1210 |
Production | |
Distributor: | Ford |
Manufacturer: | Shibaura |
Factory: | Japan |
Original price (USD), $8,000 (1986 ), |
Capacity | |
Fuel: | 6.9 gal [26.1 L] |
Hydraulic system: | 4.5 gal [17.0 L] |
3-Point Hitch | |
Rear Type: | I |
Control: | position control |
Rear lift (at ends): | 1432 lbs [649 kg] |
Power Take-off (PTO) | |
Rear PTO: | transmission, live*Optional |
Rear RPM: | 540 (1.375) |
Engine RPM: | 540@2425 |
Dimensions & Tires | |
Wheelbase: | 63 inches [160 cm] |
Weight: | 2063 to 2261 pounds |
Front tire: | 4-12 |
Rear tire: | 8.3-24 |
1310 Serial Numbers | |
Location: | On transmission housing, left side. |
Ford 1310 Power | |
Engine (net): | 19 hp [14.2 kW] |
PTO (claimed): | 16.5 hp [12.3 kW] |
Mechanical | |
Chassis: | 4x2 2WD, 4x4 MFWD 4WD |
Final drives: | spur gear |
Differential lock: | mechanical rear |
Steering: | manual |
Brakes: | differential mechanical drum |
Cab: | Two-post fixed ROPS. |
Hydraulics | |
Type: | open center |
Capacity: | 4.5 gal [17.0 L] |
Pressure: | 2133 psi [147.1 bar] |
Total flow: | 6.4 gpm [24.2 lpm] |
Electrical | |
Ground: | negative |
Charging system: | alternator |
Charging amps: | 35 |
Charging volts: | 12 |
Battery | |
Number: | 1 |
Volts: | 12 |
Amp-hours: | 72 |
info | |
Bore/Stroke: | 2.95x2.83 inches [75 x 72 mm] |
Air cleaner: | dry |
Pre-heating: | glow plugs |
Compression: | 23:1 |
Rated RPM: | 2800 |
Torque: | 39 lb-ft [52.9 Nm] |
Torque RPM: | 1800 |
Starter volts: | 12 |
Oil capacity: | 4 qts [3.8 L] |
Coolant capacity: | 2.8 qts [2.6 L] |
Engine Detail | |
Shibaura S753, diesel, 3-cylinder, liquid-cooled, 58.2 ci [1.0 L] |
info | |
Speeds: | With 8.3-24 rear tires. |
Transmission | |
Type: | unsynchronized gear |
Gears: | 12 forward and 4 reverse |
Clutch: | 216mm dry disc |
Oil capacity: | 18 qts [17.0 L] |
Three gears, plus reverse, in four ranges. |
info | |
Previous model: | Ford 1300 |
Next model: | Ford 1320 |
Series next: | Ford 1510 |
Series back: | Ford 1210 |
Dimensions | |
2WD Weight: | 2063 lbs [935 kg] |
4WD Weight: | 2261 lbs [1025 kg] |
Wheelbase: | 63 inches [160 cm] |
Length: | 109.3 inches [277 cm] |
2WD Width: | 49.6 inches [125 cm] |
4WD Width: | 55.7 inches [141 cm] |
2WD Height (steering wheel): | 56.5 inches [143 cm] |
4WD Height (steering wheel): | 55.1 inches [139 cm] |
Height (ROPS): | 82.9 inches [210 cm] |
2WD Height (exhaust): | 71 inches [180 cm] |
4WD Height (exhaust): | 69.1 inches [175 cm] |
2WD Ground clearance: | 13 inches [33 cm] |
4WD Ground clearance: | 10.6 inches [26 cm] |
2WD [100 to 127 cm] 2WD} 45.7 inches [116 cm] {4WD} Front tread: | 39.4 to 50 inches |
2WD [104 to 132 cm] 2WD} 45.5 inches [115 cm] {4WD} Rear tread: | 41.2 to 52 inches |
Ford 1310 Tires | |
2WD Ag front: | 4-12 |
4WD Ag front: | 6.00-12 |
2WD Ag rear: | 8.3-24 |
4WD Ag rear: | 12.4-16, 13.6-28 |
2WD Lawn/turf front: | 25x8.50-12 |
4WD Lawn/turf front: | 25x8.50-14 |
info | |
In addition to the mid-mount mowing deck, the Ford 1310 was matched for the 48 or 59 inch model 930A rear finish mowers. The 48-inch model 938 rear rotary cutters could be used for rough mowing. The 917 flail mowers was matched in a 62-inch widths. In addition to a loader and backhoe, the model 706 6-cubic-foot rear scoop was available. Front and rear 60 or 72-inch blade were available, plus the 762A 72-inch landscape rake. Rear tillers were available in 42 and 48-inch widths. Ford listed single-bottom plows, 67-inch disc harrows, and 72-inch cultivators as matched equipment. |
60" Mower deck | |
Type: | rear-mount Ford 938, 1-blade with hydraulic lift |
Cutting width: | 60 inches [152 cm] |
48" Mower deck | |
Type: | rear-mount Ford 930A, 3-blade with hydraulic lift |
Cutting width: | 48 inches [121 cm] |
59" Mower deck | |
Type: | rear-mount Ford 930A, 3-blade with hydraulic lift |
Cutting width: | 59 inches [149 cm] |
48" Snow blower | |
Type: | rear-mount Ford 715, two-stage with hydraulic lift |
Clearing width: | 48 inches [121 cm] |
60" Snow blower | |
Type: | rear-mount Ford 715, two-stage with hydraulic lift |
Clearing width: | 60 inches [152 cm] |
Loader | |
Loader type: | Ford 770A/B |
Weight: | 580 lbs [263 kg] |
Height (to pin): | 93 inches [236 cm] |
Clearance, dumped bucket: | 75 inches [190 cm] |
Dump reach: | 22 inches [55 cm] |
Dump angle: | 40 |
Reach at ground: | 61 inches [154 cm] |
Rollback angle: | 10 |
Breakout force (lift): | 1,420 lbs [644 kg] |
Lift to full height (at pin): | 820 lbs [371 kg] |
Bucket capacity: | 0.26 cu yd [0.2 cu m], 0.30 cu yd [0.2 cu m] |
Bucket width: | 48 inches [121 cm], 60 inches [152 cm] |
Raise time to height: | 5.2 s |
Bucket dump time: | 3.1 s |
Lowering time: | 2.7 s |
Backhoe | |
Backhoe type: | Ford 757A |
Bucket width: | 8 inches [20 cm], 13 inches [33 cm], 16 inches [40 cm] |
Digging depth: | 76.5 inches [194 cm] |
2-Foot flat digging depth: | 74.5 inches [189 cm] |
8-Foot flat digging depth: | 40.3 inches [102 cm] |
Reach from pivot: | 107 inches [271 cm] |
Loading height: | 70 inches [177 cm] |
Dipperstick force: | 719 lbs [326 kg] |