Holder A12 Specifications - Holder A12 Specs

info
1956 - ????
Production
Manufacturer: Holder
Capacity
Fuel: 2.5 gal [9.5 L]
Hydraulic system: 1 gal [3.8 L]
Power Take-off (PTO)
Rear PTO: independent
Rear RPM: 540/920
Dimensions & Tires
Wheelbase: 45 inches [114 cm]
Weight: 1500 lbs [680 kg]
Front tire: 5.00x16
Rear tire: 5.00x16
A12 Serial Numbers
- Serial numbers unknown -
Holder A12 Power
Engine: 12 hp [8.9 kW]
Mechanical
Chassis: 4x4 articulated 4WD
Brakes: drum
Cab: Open operator station.
Hydraulics
Type: open center
Capacity: 1 gal [3.8 L]
Pressure: 1850 psi [127.6 bar]
Pump flow: 2.6 gpm [9.8 lpm]
Belt Pulley
Diameter: 8.25 inches [20 cm]
Width: 4.75 inches [12 cm]
RPM: 1550
Battery
Volts: 12
info
Bore/Stroke: 3.465x3.937 inches [88 x 100 mm]
Power: 12 hp [8.9 kW]
Fuel system: direct injection
Air cleaner: oil bath
Compression: 20:1
Rated RPM: 2200
Starter volts: 12
Engine Detail
Two-stroke engine., Sachs D600L, diesel, 1-cylinder, air-cooled, 36.9 ci [0.6 L]
info
Speeds: With 5.00x16 tires.
Transmission
Gears: 6 forward and 3 reverse
Clutch: dry disc
Dimensions
Weight: 1500 lbs [680 kg]
Wheelbase: 45 inches [114 cm]
Length: 80 inches [203 cm]
Width: 30 inches [76 cm]
Height (steering wheel): 44 inches [111 cm]
Ground clearance: 9.5 inches [24 cm]
4WD turn radius: 6 feet [1.8 m]
Holder A12 Tires
Ag front: 5.50x16
Ag rear: 5.50x16