Ingersoll 4020 Specifications - Ingersoll 4020 Specs

info
Series: 4020
Production
Manufacturer: Ingersoll
Type: Garden tractor
Factory: Winneconne, Wisconsin, USA
Variants
4020PS: power steering
Mechanical
Chassis: 4x2 2WD
4020 Steering: manual
4020PS Steering: power
Cab: Open operator station.
Transmission: hydraulic drive
Capacity
Fuel: 3 gal 11.4 L
Hydraulics
Type: open center
Valves: 2
4020 Pump flow: 8 gpm 30.3 lpm
4020PS Pump flow: 9.5 gpm 36.0 lpm
Dimensions & Tires
Wheelbase: 48 inches 121 cm
Weight: 765 to 805 pounds
Front tire: 16x6.50-8
Rear tire: 32x8.00-16
4020 Serial Numbers
Location: Serial number plate on the left side of the Ingersoll 4020 tractor frame, above the floor board.
photo of 4020 serial number
Electrical
Ground: negative
Charging system: flywheel alternator
Charging amps: 20
Charging volts: 12
Battery
Number: 1
Volts: 12
info
Series: 4020
Engine Detail
Onan P220G, gasoline, 2-cylinder, air-cooled horizontal-shaft horizontally-opposed
Displacement: 781 cc 47.7 ci
Bore/Stroke: 3.25x2.875 inches 83 x 73 mm
Power (gross): 20 hp 14.9 kW
Compression: 7:1
Starter: electric
Starter volts: 12
Sparkplug: Champion RS14YC
Sparkplug gap: 0.025 inches 0.635 mm
Intake valve clearance: 0.005 inches 0.127 mm *Cold
Exhaust valve clearance: 0.013 inches 0.330 mm *Cold
info
Series: 4020
Transmission
Transmission: Hy-Drive
Type: hydraulic drive
Gears: infinite (2-range) forward and reverse
Oil change: 500 h
info
Series: 4020
Ingersoll 4020 Tires
Lawn/turf front: 16x6.50-8
Lawn/turf rear: 32x8.00-16
Dimensions
Wheelbase: 48 inches 121 cm
Length: 72 inches 182 cm
Width: 41 inches 104 cm
Height (steering wheel): 43.5 inches 110 cm
4020 Weight: 765 lbs 347 kg
4020PS Weight: 805 lbs 365 kg
Clearance (rear axle): 11 inches 27 cm
Front tread: 31.5 inches 80 cm
Rear tread: 33.5 inches 85 cm
info
Series: 4020
Attachment overview
48" mid-mount mower deck, Blade, Garden tractors are capable of using tillers, plows, or other ground-engaging attachments. TractorData does not list details of these attachments.
48" Mower deck
Type: mid-mount Ingersoll RM48
Cutting width: 48 inches 121 cm
Blade
Type: front-mount Ingersoll
Width: 54 inches 137 cm