FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
| info | |
| 1955 - 1968, Utility tractor |
| Production | |
| Manufacturer: | International Harvester |
| Type: | Utility tractor |
| The Cub Lo-Boy is very similar to the standard Cub. The Lo-Boy using shorter front end spindles and rotating the final drive made the Lo-Boy about 8 inches shorter than the standard Cub. Both the standard Cub and the Lo-Boy had the IH "Cultivision" offset engine and steering. | |
| International Harvester Cub Lo-Boy Power | |
| Drawbar (claimed): | 10 hp 7.5 kW |
| PTO (claimed): | 11 hp 8.2 kW |
| Belt (claimed): | 9.76 hp 7.3 kW |
| Plows: | 1 (12 inch) |
| International Harvester Cub Lo-Boy Engine | |
| Fuel tank: | 7.5 gal 28.4 L |
| Mechanical | |
| Chassis: | 4x2 2WD |
| Final drives: | bull gear |
| Steering: | manual |
| Cab: | Open operator station. |
| Transmission: | 3-speed sliding gear |
| Hydraulics | |
| Type: | open center |
| Pressure: | 1200 psi 82.7 bar |
| Pump flow: | 2.8 gpm 10.6 lpm |
| Tractor hitch | |
| Type: | IH Fast Hitch*Optional |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 1600-1800 (counter-clockwise) |
| Dimensions & Tires | |
| Wheelbase: | 62 inches 157 cm |
| Weight: | 1620 lbs 734 kg |
| Front tire: | 4.00-12 |
| Rear tire: | 8.3-24 |
| Cub Lo-Boy Serial Numbers | |
| Location: | Steering gear housing on right side |
| 1955: | 501 |
| 1956: | 2555 |
| 1957: | 3929 |
| 1958: | 6582 |
| 1959: | 10567 |
| 1960: | 12371 |
| 1961: | 13904 |
| 1962: | 15506 |
| 1963: | 16440 |
| 1964: | 17927 |
| 1965: | 19406 |
| 1966: | 21176 |
| 1967: | 23115 |
| 1968: | 24481 |
| Final: | 26007 |
| Links | |
| FarmallCub.com: Information, photos, and a message board, ATIS Cub FAQ: Information on the Cub, McCormick-Deering Farmall Cub: |
| Electrical | |
| Ground: | positive (early), negative (late) |
| Battery volts: | 6 (early), 12 (late) |
| info | |
| 1955 - 1968, Utility tractor |
| Engine Detail | |
| International Harvester C60, gasoline, 4-cylinder, liquid-cooled | |
| Displacement: | 59.5 ci 1.0 L |
| Bore/Stroke: | 2.625x2.75 inches 67 x 70 mm |
| Rated RPM: | 1800 |
| Firing order: | 1-3-4-2 |
| Starter volts: | 6 (early), 12 (late) |
| Oil capacity: | 3 qts 2.8 L |
| Coolant capacity: | 9.75 qts 9.2 L |
| Sparkplug gap: | 0.023 inches 0.584 mm |
| Intake valve clearance: | 0.013 inches 0.330 mm cold |
| Exhaust valve clearance: | 0.013 inches 0.330 mm cold |
| info | |
| 1955 - 1968, Utility tractor |
| Transmission | |
| Type: | sliding gear |
| Gears: | 3 forward and 1 reverse |
| Clutch: | dry disc |
| info | |
| 1955 - 1968, Utility tractor |
| International Harvester Cub Lo-Boy Tires | |
| Ag front: | 4.00-12 |
| Ag rear: | 8.3-24 |
| Dimensions | |
| Wheelbase: | 62 inches 157 cm |
| Length: | 92 inches 233 cm |
| Width: | 48.25 inches 122 cm *Width at minimum tread. |
| Height (steering wheel): | 56.25 inches 142 cm |
| Weight: | 1620 lbs 734 kg |
| Clearance (front axle): | 14 inches 35 cm |
| Clearance (rear axle): | 14 inches 35 cm |
| Rear axle: | 1.56 inch diameter 39 mm |
| Front tread: | 43 to 55 inches 109 to 139 cm |
| Rear tread: | 40 to 56 inches 101 to 142 cm |