FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
Cub ↑ | |
Series: | Cub |
Production | |
Manufacturer: | International Harvester |
Factory: | Louisville, Kentucky, USA |
The International Cub's PTO ran counter-clockwise ("backwards") and at full engine speed, making it incompatible with standard PTO-driven equipment. In 1975 the "Increased Power" New International Cub was released. |
International Harvester Cub Power | |
Engine: | 13 hp 9.7 kW |
Drawbar (claimed): | 10 hp 7.5 kW |
PTO (claimed): | 11 hp 8.2 kW |
Plows: | 1 (12 inch) |
Mechanical | |
Chassis: | 4x2 2WD |
Steering: | manual |
Brakes: | differential mechanical drum |
Cab: | Open operator station. |
Transmission: | 3-speed sliding gear |
Capacity | |
Fuel: | 7.5 gal 28.4 L |
Hydraulic system: | 0.56 gal 2.1 L |
Hydraulics | |
Capacity: | 0.56 gal 2.1 L |
Pressure: | 1200 psi 82.7 bar |
Total flow: | 2.8 gpm 10.6 lpm |
Tractor hitch | |
Type: | IH Fast Hitch (optional) |
Power Take-off (PTO) | |
Rear PTO: | independent |
Rear RPM: | 1800 (counter-clockwise) |
Dimensions & Tires | |
Wheelbase: | 69.25 inches 175 cm |
Weight: | 1477 to 1877 pounds |
Front tire: | 4.00-12 |
Rear tire: | 8-24 |
Cub Serial Numbers | |
Location: | Serial number plate on the right side of the Farmall Cub, above the front axle. |
1964: | 224704 |
1965: | 225110 |
1966: | 227209 |
1967: | 229225 |
1968: | 231005 |
1969: | 232981 |
1970: | 234868 |
1971: | 236827 |
1972: | 238506 |
1973: | 240581 |
1974: | 242746 |
1975: | 248125 |
Final: | 253685 |
1976: | 248618 |
1977: | 250832 |
1978: | 252109 |
1979: | 253136 |
Links | |
FarmallCub.com: Information, photos, and a message board, ATIS Cub FAQ: Information on the Cub, McCormick-Deering Farmall Cub: |
Electrical | |
Ground: | negative |
Charging system: | generator, alternator (sn 248125) |
Battery volts: | 12 |
info | |
Cub ↑ | |
Series: | Cub |
Engine Detail | |
International Harvester C60, gasoline, 4-cylinder, liquid thermosyphon-cooled | |
Displacement: | 59.5 ci 1.0 L |
Bore/Stroke: | 2.625x2.75 inches 67 x 70 mm |
Power: | 13 hp 9.7 kW |
Air cleaner: | oil bath |
Compression: | 6.5:1 |
Rated RPM: | 1800 |
Firing order: | 1-3-4-2 |
Starter volts: | 12 |
Coolant capacity: | 9.75 qts 9.2 L |
Sparkplug: | Champion D-21, AC C86 |
Sparkplug gap: | 0.023 inches 0.584 mm |
Intake valve clearance: | 0.013 inches 0.330 mm (cold) |
Exhaust valve clearance: | 0.013 inches 0.330 mm (cold) |
Engine Oil | |
Oil capacity: | 3 qts 2.8 L |
Oil change: | 120 h |
info | |
Cub ↑ | |
Series: | Cub |
Transmission | |
Type: | sliding gear |
Gears: | 3 forward and 1 reverse |
Oil capacity: | 1.75 qts 1.7 L |
info | |
Cub ↑ | |
Series: | Cub |
International Harvester Cub Tires | |
Ag front: | 4.00-12 |
Ag rear: | 8-24 |
Dimensions | |
Wheelbase: | 69.25 inches 175 cm |
Length: | 99.325 inches 252 cm |
Width: | 48.25 inches 122 cm |
Height: | 62.75 inches 159 cm |
Height (exhaust): | 76.25 inches 193 cm |
International Harvester Cub Weight | |
Operating: | 1,477 lbs 669 kg (early), 1,877 lbs 851 kg (late) |
Ballasted: | 2,891 lbs 1311 kg |
info | |
Cub ↑ | |
Series: | Cub |
Attachment overview | |
42" mower deck, 60" mid-mount mower deck, Blade, Front-end loader |
42" Mower deck | |
Type: | IH Danco C-2, 1-blade |
Cutting width: | 42 inches 106 cm |
60" Mower deck | |
Type: | mid-mount IH Danco C-3, 3-blade |
Cutting width: | 60 inches 152 cm |
Blade | |
Type: | mid-mount International 54A |
Width: | 54 inches 137 cm |
International 1000 Loader | |
Height (to pin): | 94 inches 238 cm |
Clearance, dumped bucket: | 75 inches 190 cm |
Dump reach: | 27.5 inches 69 cm |
Dump angle: | 45° |
Rollback at ground: | 18° |
Breakout force (lift): | 600 lbs 272 kg |
Bucket capacity: | 0.26 cu yd 0.2 cu m |
Bucket width: | 36 inches 91 cm |
Raise time to height: | 6.5 s |
Bucket dump time: | 5 s |
Lowering time: | 5 s |