International Harvester A-766 Specifications - International Harvester A-766 Specs

info
Series: → A-866
Production
Manufacturer: International Harvester
Type: Row-Crop tractor
Factory: Geelong, Australia
Total built: 10,799
International Harvester A-766 Engine
Fuel tank: 37 gal 140.0 L
Mechanical
Chassis: 4x2 2WD
Steering: hydrostatic power
Brakes: hydraulic dry disc
Cab: Open operator station. Cab optional.
Transmissions: 8-speed sliding gear, 16-speed partial power shift
Hydraulics
Type: open center
Pump flow: 12 gpm 45.4 lpm
Tractor hitch
Rear Type: II
Power Take-off (PTO)
Rear PTO: independent
Rear RPM: 540/1000
Dimensions & Tires
Wheelbase: 102.7 inches 260 cm
Weight: 10,300 lbs 4672 kg
Front tire: 9.5L-15
Rear tire: 18.4-34
A-766 Serial Numbers
Location: Left side of clutch housing
Battery
Volts: 12
info
Series: → A-866
Engine Detail
International Harvester D-310, diesel, 6-cylinder, liquid-cooled
Displacement: 310 ci 5.1 L
Bore/Stroke: 3.875x4.375 inches 98 x 111 mm
Air cleaner: dual stage dry
Compression: 16:1
Rated RPM: 2300
Starter volts: 12
info
Series: → A-866
Transmissions overview
8-speed sliding gear, 16-speed partial power shift
Transmission
Transmission: Torque Amplifier
Type: partial power shift
Gears: 16 forward and 8 reverse
Clutch: dry disc
Four gears (1-4) in two ranges (low/high) with the Torque Amplifer (TA) power shift. The TA allows a shift-on-the-move between direct drive and a lower speed.
info
Series: → A-866
International Harvester A-766 Tires
Ag front: 9.5L-15
Ag rear: 18.4-34
Dimensions
Wheelbase: 102.7 inches 260 cm
Operating weight: 10,300 lbs 4672 kg
Ballasted weight: 11,880 lbs 5388 kg
Front tread: 60 to 84 inches 152 to 213 cm
Rear tread: 56 to 100 inches 142 to 254 cm