International Harvester 3288 Specifications - International Harvester 3288 Specs

info
1981 - 1985 30 Series, Row-Crop tractor
Previous model: International Harvester 886
Series next: International Harvester 3488
Series back: International Harvester 3088
Production
Manufacturer: International Harvester
Factory: Rock Island, Illinois, USA
Total built: 1,162
Original price (USD), $40,000 (1985 ),
Capacity
Fuel: 50 gal [189.3 L]
Hydraulic system: 22.5 gal [85.2 L]
3-Point Hitch
Rear Type: II
Control: draft sensing
Power Take-off (PTO)
Rear PTO: independent
Rear RPM: 540/1000
Engine RPM: 540@2100 1000@2100
Dimensions & Tires
Wheelbase: 105 inches [266 cm]
Weight: 11100 to 11760 pounds
Front tire: 9.5L-15
Rear tire: 18.4-34
3288 Serial Numbers
Location: Serial number plate on the right side of the tractor frame, ahead of the rear axle.
International Harvester 3288 Power
Drawbar (claimed): 80.7 hp [60.2 kW]
PTO (claimed): 90 hp [67.1 kW]
Drawbar (tested): 79.71 hp [59.4 kW]
PTO (tested): 90.46 hp [67.5 kW]
Mechanical
Chassis: 4x2 2WD, 4x4 MFWD 4WD
Steering: power
Brakes: hydraulic wet disc
Cab: Cab standard with heat and A/C. Optional burgundy or western finish interiors.
Hydraulics
Type: open center
Capacity: 22.5 gal [85.2 L]
Valves: 2 or 3
Pump flow: 15 gpm [56.8 lpm]
Total flow: 27 gpm [102.2 lpm]
Steering flow: 12 gpm [45.4 lpm]
Electrical
Ground: negative
Battery
Volts: 12
info
Bore/Stroke: 3.875x5.060 inches [98 x 129 mm]
Air cleaner: dual dry element
Compression: 14.8:1
Rated RPM: 2400
Idle RPM: 900-2400
Starter volts: 12
Oil capacity: 11 qts [10.4 L]
Coolant capacity: 24 qts [22.7 L]
Engine Detail
International Harvester D358, diesel, 6-cylinder, liquid-cooled, 358 ci [5.9 L]
info
Speeds: With 18.4-34R1 rear tires.
Transmission
Type: partial power shift
Gears: 16 forward and 8 reverse
Clutch: cerametallic disc
Oil capacity: 90 qts [85.2 L]
Left lever selects gear, right lever selects high, low, or reverse range. Tractor may be shifted on the move without the clutch between gear pairs (1-2, 3-4, etc). Synchronized shifting, using the clutch, between gear pairs (2 to 3, 4 to 5, etc). The transmission is four-gear with the powershift provided by an electric solenoid actuated Torque Amplifier.
info
Previous model: International Harvester 886
Series next: International Harvester 3488
Series back: International Harvester 3088
Dimensions
Weight (shipping): 11100 lbs [5034 kg]
Weight (operating): 11,760 lbs [5334 kg]
Wheelbase: 105 inches [266 cm]
Length: 184 inches [467 cm]
Width: 102 inches [259 cm] *Width at minimum tread.
Height (cab): 112 inches [284 cm]
Ground clearance: 13 inches [33 cm]
Rear axle: 3.25 by 104 inches [82x2641 mm] 3.25 by 118 inches [82x2997 mm]
2WD turn radius: 13.5 feet [4.1 m], 11.6 feet [3.5 m] (with brakes)
International Harvester 3288 Tires
Ag front: 9.5L-15
Ag rear: 18.4-34