FastFix DB
Search for Workshop, Owner, Service and Parts Manuals
info | |
The International 140 began as the industrial version of the Farmall 140. Industrial tractors had heavier front axles and foot-operated throttles, among other options. As the Farmall and International brands were merged the differences simply became options that the buyer could order. |
Production | |
Manufacturer: | International Harvester |
Total built: | 66,290 |
Original price (USD), $8,200 (1979 ), |
Capacity | |
Fuel: | 11 gal [41.6 L] |
Hydraulic system: | 3.38 gal [12.8 L] |
Rear Hitch | |
Type: | IH Fast Hitch (one-point) |
Power Take-off (PTO) | |
Rear PTO: | transmission |
Rear RPM: | 540 |
Dimensions & Tires | |
Wheelbase: | 71 inches [180 cm] |
Weight: | 2700 to 3000 pounds |
Front tire: | 5.00-15 |
Rear tire: | 9.5-24 |
140 Serial Numbers | |
Location: | Clutch housing on left side |
International Harvester 140 Power | |
Engine (gross): | 28 hp [20.9 kW] |
Engine (net): | 25 hp [18.6 kW] |
PTO (claimed): | 21 hp [15.7 kW] |
Drawbar (tested): | 21.25 hp [15.8 kW] |
Belt (tested): | 23.02 hp [17.2 kW] |
Mechanical | |
Chassis: | 4x2 2WD |
Steering: | manual worm-and-sector |
Brakes: | differential mechanical contracting band |
Cab: | Open operator station. |
Hydraulics | |
Type: | IH Touch-Control |
Capacity: | 3.38 gal [12.8 L] |
Total flow: | 4.6 gpm [17.4 lpm] |
Electrical | |
Ground: | positive (6V), negative (12V) |
Charging system: | generator (early), alternator (late) |
Battery | |
Number: | 1 |
Volts: | 6 (early), 12 (late) |
info | |
Bore/Stroke: | 3.125x4.00 inches [79 x 102 mm] |
Power (gross): | 28 hp [20.9 kW] |
Air cleaner: | oil bath |
Compression: | 6.94:1 |
Rated RPM: | 1400 |
Torque: | 106 lb-ft [143.7 Nm] |
Torque RPM: | 1400 |
Firing order: | 1-3-4-2 |
Starter volts: | 6 (early), 12 (late) |
Oil capacity: | 5 qts [4.7 L] |
Coolant capacity: | 15 qts [14.2 L] |
Engine Detail | |
International Harvester C-123, gasoline, 4-cylinder, liquid-cooled vertical I-head, 122.7 ci [2.0 L] |
info | |
Previous model: | International Harvester 130 |
Next model: | International Harvester 274 International Harvester 284 |
Transmission | |
Type: | sliding gear |
Gears: | 4 forward and 1 reverse |
Clutch: | single 9-inch dry disc |
Oil capacity: | 5 qts [4.7 L] |
info | |
Previous model: | International Harvester 130 |
Next model: | International Harvester 274 International Harvester 284 |
Dimensions | |
Weight (shipping): | 2700 lbs [1224 kg] |
Weight (operating): | 3000 lbs [1360 kg] |
Wheelbase: | 71 inches [180 cm] |
Length: | 107 inches [271 cm] |
Width: | 56 inches [142 cm] |
Height (steering wheel): | 65.5 inches [166 cm] |
Ground clearance: | 22.3 inches [56 cm] |
Front tread: | 40 to 58 inches [101 to 147 cm] |
Rear tread: | 40 to 68 inches [101 to 172 cm] |
International Harvester 140 Tires | |
Ag front: | 6.00-16 |
Ag rear: | 11.2-24 |
Lawn/turf rear: | 12.4-24 |
info | |
Previous model: | International Harvester 130 |
Next model: | International Harvester 274 International Harvester 284 |
Loader | |
Loader type: | International Harvester 1000 |
Weight: | 635 lbs [288 kg] |
Clearance, dumped bucket: | 74 inches [187 cm] |
Rollback angle: | 15 |
Lift to full height (at pin): | 450 lbs [204 kg] |
Bucket width: | 42 inches [106 cm] |